| /* set object implementation | |
| Written and maintained by Raymond D. Hettinger <python@rcn.com> | |
| Derived from Objects/dictobject.c. | |
| The basic lookup function used by all operations. | |
| This is based on Algorithm D from Knuth Vol. 3, Sec. 6.4. | |
| The initial probe index is computed as hash mod the table size. | |
| Subsequent probe indices are computed as explained in Objects/dictobject.c. | |
| To improve cache locality, each probe inspects a series of consecutive | |
| nearby entries before moving on to probes elsewhere in memory. This leaves | |
| us with a hybrid of linear probing and randomized probing. The linear probing | |
| reduces the cost of hash collisions because consecutive memory accesses | |
| tend to be much cheaper than scattered probes. After LINEAR_PROBES steps, | |
| we then use more of the upper bits from the hash value and apply a simple | |
| linear congruential random number generator. This helps break-up long | |
| chains of collisions. | |
| All arithmetic on hash should ignore overflow. | |
| Unlike the dictionary implementation, the lookkey function can return | |
| NULL if the rich comparison returns an error. | |
| Use cases for sets differ considerably from dictionaries where looked-up | |
| keys are more likely to be present. In contrast, sets are primarily | |
| about membership testing where the presence of an element is not known in | |
| advance. Accordingly, the set implementation needs to optimize for both | |
| the found and not-found case. | |
| */ | |
| #include "Python.h" | |
| #include "pycore_ceval.h" // _PyEval_GetBuiltin() | |
| #include "pycore_critical_section.h" // Py_BEGIN_CRITICAL_SECTION, Py_END_CRITICAL_SECTION | |
| #include "pycore_dict.h" // _PyDict_Contains_KnownHash() | |
| #include "pycore_modsupport.h" // _PyArg_NoKwnames() | |
| #include "pycore_object.h" // _PyObject_GC_UNTRACK() | |
| #include "pycore_pyatomic_ft_wrappers.h" // FT_ATOMIC_LOAD_SSIZE_RELAXED() | |
| #include "pycore_pyerrors.h" // _PyErr_SetKeyError() | |
| #include "pycore_setobject.h" // _PySet_NextEntry() definition | |
| #include "pycore_weakref.h" // FT_CLEAR_WEAKREFS() | |
| #include "stringlib/eq.h" // unicode_eq() | |
| #include <stddef.h> // offsetof() | |
| #include "clinic/setobject.c.h" | |
| /*[clinic input] | |
| class set "PySetObject *" "&PySet_Type" | |
| class frozenset "PySetObject *" "&PyFrozenSet_Type" | |
| [clinic start generated code]*/ | |
| /*[clinic end generated code: output=da39a3ee5e6b4b0d input=97ad1d3e9f117079]*/ | |
| /*[python input] | |
| class setobject_converter(self_converter): | |
| type = "PySetObject *" | |
| [python start generated code]*/ | |
| /*[python end generated code: output=da39a3ee5e6b4b0d input=33a44506d4d57793]*/ | |
| /* Object used as dummy key to fill deleted entries */ | |
| static PyObject _dummy_struct; | |
| #define dummy (&_dummy_struct) | |
| #define SET_LOOKKEY_FOUND 1 | |
| #define SET_LOOKKEY_NO_MATCH 0 | |
| #define SET_LOOKKEY_ERROR (-1) | |
| #define SET_LOOKKEY_CHANGED (-2) | |
| #define SET_LOOKKEY_EMPTY (-3) | |
| typedef int (*compare_func)(PySetObject *so, setentry *table, setentry *ep, | |
| PyObject *key, Py_hash_t hash); | |
| #ifdef Py_GIL_DISABLED | |
| #define SET_IS_SHARED(so) _PyObject_GC_IS_SHARED(so) | |
| #define SET_MARK_SHARED(so) _PyObject_GC_SET_SHARED(so) | |
| static void | |
| ensure_shared_on_read(PySetObject *so) | |
| { | |
| if (!_Py_IsOwnedByCurrentThread((PyObject *)so) && !SET_IS_SHARED(so)) { | |
| // The first time we access a set from a non-owning thread we mark it | |
| // as shared. This ensures that a concurrent resize operation will | |
| // delay freeing the old entries using QSBR, which is necessary | |
| // to safely allow concurrent reads without locking... | |
| Py_BEGIN_CRITICAL_SECTION(so); | |
| if (!SET_IS_SHARED(so)) { | |
| SET_MARK_SHARED(so); | |
| } | |
| Py_END_CRITICAL_SECTION(); | |
| } | |
| } | |
| static inline Py_ALWAYS_INLINE int | |
| set_compare_threadsafe(PySetObject *so, setentry *table, setentry *ep, | |
| PyObject *key, Py_hash_t hash) | |
| { | |
| PyObject *startkey = FT_ATOMIC_LOAD_PTR_ACQUIRE(ep->key); | |
| if (startkey == NULL) { | |
| return SET_LOOKKEY_EMPTY; | |
| } | |
| if (startkey == key) { | |
| return SET_LOOKKEY_FOUND; | |
| } | |
| Py_ssize_t ep_hash = FT_ATOMIC_LOAD_SSIZE_ACQUIRE(ep->hash); | |
| if (ep_hash == hash) { | |
| if (!_Py_TryIncrefCompare(&ep->key, startkey)) { | |
| return SET_LOOKKEY_CHANGED; | |
| } | |
| int cmp = PyObject_RichCompareBool(startkey, key, Py_EQ); | |
| Py_DECREF(startkey); | |
| if (cmp < 0) { | |
| return SET_LOOKKEY_ERROR; | |
| } | |
| if (table == FT_ATOMIC_LOAD_PTR_ACQUIRE(so->table) && | |
| startkey == FT_ATOMIC_LOAD_PTR_ACQUIRE(ep->key)) { | |
| assert(cmp == SET_LOOKKEY_FOUND || cmp == SET_LOOKKEY_NO_MATCH); | |
| return cmp; | |
| } | |
| else { | |
| /* The set was mutated, restart */ | |
| return SET_LOOKKEY_CHANGED; | |
| } | |
| } | |
| return SET_LOOKKEY_NO_MATCH; | |
| } | |
| #else | |
| #define SET_IS_SHARED(so) 0 | |
| #define SET_MARK_SHARED(so) | |
| #endif | |
| static inline Py_ALWAYS_INLINE int | |
| set_compare_entry_lock_held(PySetObject *so, setentry *table, setentry *entry, | |
| PyObject *key, Py_hash_t hash) | |
| { | |
| _Py_CRITICAL_SECTION_ASSERT_OBJECT_LOCKED(so); | |
| if (entry->hash == 0 && entry->key == NULL) | |
| return SET_LOOKKEY_EMPTY; | |
| if (entry->hash == hash) { | |
| PyObject *startkey = entry->key; | |
| assert(startkey != dummy); | |
| if (startkey == key) | |
| return SET_LOOKKEY_FOUND; | |
| if (PyUnicode_CheckExact(startkey) | |
| && PyUnicode_CheckExact(key) | |
| && unicode_eq(startkey, key)) | |
| return SET_LOOKKEY_FOUND; | |
| table = so->table; | |
| Py_INCREF(startkey); | |
| int cmp = PyObject_RichCompareBool(startkey, key, Py_EQ); | |
| Py_DECREF(startkey); | |
| if (cmp < 0) | |
| return SET_LOOKKEY_ERROR; | |
| if (table != so->table || entry->key != startkey) | |
| return SET_LOOKKEY_CHANGED; | |
| if (cmp > 0) | |
| return SET_LOOKKEY_FOUND; | |
| } | |
| return SET_LOOKKEY_NO_MATCH; | |
| } | |
| // This is similar to set_compare_entry_lock_held() but we don't need to | |
| // incref startkey before comparing and we don't need to check if the set has | |
| // changed. This also omits the PyUnicode_CheckExact() special case since it | |
| // doesn't help much for frozensets. | |
| static inline Py_ALWAYS_INLINE int | |
| set_compare_frozenset(PySetObject *so, setentry *table, setentry *ep, | |
| PyObject *key, Py_hash_t hash) | |
| { | |
| assert(PyFrozenSet_Check(so)); | |
| PyObject *startkey = ep->key; | |
| if (startkey == NULL) { | |
| return SET_LOOKKEY_EMPTY; | |
| } | |
| if (startkey == key) { | |
| return SET_LOOKKEY_FOUND; | |
| } | |
| Py_ssize_t ep_hash = ep->hash; | |
| if (ep_hash == hash) { | |
| int cmp = PyObject_RichCompareBool(startkey, key, Py_EQ); | |
| if (cmp < 0) { | |
| return SET_LOOKKEY_ERROR; | |
| } | |
| assert(cmp == SET_LOOKKEY_FOUND || cmp == SET_LOOKKEY_NO_MATCH); | |
| return cmp; | |
| } | |
| return SET_LOOKKEY_NO_MATCH; | |
| } | |
| static void | |
| set_zero_table(setentry *table, size_t size) | |
| { | |
| #ifdef Py_GIL_DISABLED | |
| for (size_t i = 0; i < size; i++) { | |
| setentry *entry = &table[i]; | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(entry->hash, 0); | |
| FT_ATOMIC_STORE_PTR_RELEASE(entry->key, NULL); | |
| } | |
| #else | |
| memset(table, 0, sizeof(setentry)*size); | |
| #endif | |
| } | |
| /* ======================================================================== */ | |
| /* ======= Begin logic for probing the hash table ========================= */ | |
| /* Set this to zero to turn-off linear probing */ | |
| #ifndef LINEAR_PROBES | |
| #define LINEAR_PROBES 9 | |
| #endif | |
| /* This must be >= 1 */ | |
| #define PERTURB_SHIFT 5 | |
| static int | |
| set_do_lookup(PySetObject *so, setentry *table, size_t mask, PyObject *key, | |
| Py_hash_t hash, setentry **epp, compare_func compare_entry) | |
| { | |
| setentry *entry; | |
| size_t perturb = hash; | |
| size_t i = (size_t)hash & mask; /* Unsigned for defined overflow behavior */ | |
| int probes; | |
| int status; | |
| while (1) { | |
| entry = &table[i]; | |
| probes = (i + LINEAR_PROBES <= mask) ? LINEAR_PROBES: 0; | |
| do { | |
| status = compare_entry(so, table, entry, key, hash); | |
| if (status != SET_LOOKKEY_NO_MATCH) { | |
| if (status == SET_LOOKKEY_EMPTY) { | |
| return SET_LOOKKEY_NO_MATCH; | |
| } | |
| *epp = entry; | |
| return status; | |
| } | |
| entry++; | |
| } while (probes--); | |
| perturb >>= PERTURB_SHIFT; | |
| i = (i * 5 + 1 + perturb) & mask; | |
| } | |
| Py_UNREACHABLE(); | |
| } | |
| static int set_table_resize(PySetObject *, Py_ssize_t); | |
| static int | |
| set_add_entry_takeref(PySetObject *so, PyObject *key, Py_hash_t hash) | |
| { | |
| setentry *table; | |
| setentry *freeslot; | |
| setentry *entry; | |
| size_t perturb; | |
| size_t mask; | |
| size_t i; /* Unsigned for defined overflow behavior */ | |
| int probes; | |
| int cmp; | |
| restart: | |
| mask = so->mask; | |
| i = (size_t)hash & mask; | |
| freeslot = NULL; | |
| perturb = hash; | |
| while (1) { | |
| entry = &so->table[i]; | |
| probes = (i + LINEAR_PROBES <= mask) ? LINEAR_PROBES: 0; | |
| do { | |
| if (entry->hash == 0 && entry->key == NULL) | |
| goto found_unused_or_dummy; | |
| if (entry->hash == hash) { | |
| PyObject *startkey = entry->key; | |
| assert(startkey != dummy); | |
| if (startkey == key) | |
| goto found_active; | |
| if (PyUnicode_CheckExact(startkey) | |
| && PyUnicode_CheckExact(key) | |
| && unicode_eq(startkey, key)) | |
| goto found_active; | |
| table = so->table; | |
| Py_INCREF(startkey); | |
| cmp = PyObject_RichCompareBool(startkey, key, Py_EQ); | |
| Py_DECREF(startkey); | |
| if (cmp > 0) | |
| goto found_active; | |
| if (cmp < 0) | |
| goto comparison_error; | |
| if (table != so->table || entry->key != startkey) | |
| goto restart; | |
| mask = so->mask; | |
| } | |
| else if (entry->hash == -1) { | |
| assert (entry->key == dummy); | |
| freeslot = entry; | |
| } | |
| entry++; | |
| } while (probes--); | |
| perturb >>= PERTURB_SHIFT; | |
| i = (i * 5 + 1 + perturb) & mask; | |
| } | |
| found_unused_or_dummy: | |
| if (freeslot == NULL) | |
| goto found_unused; | |
| if (freeslot->hash != -1) { | |
| goto restart; | |
| } | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(so->used, so->used + 1); | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(freeslot->hash, hash); | |
| FT_ATOMIC_STORE_PTR_RELEASE(freeslot->key, key); | |
| return 0; | |
| found_unused: | |
| so->fill++; | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(so->used, so->used + 1); | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(entry->hash, hash); | |
| FT_ATOMIC_STORE_PTR_RELEASE(entry->key, key); | |
| if ((size_t)so->fill*5 < mask*3) | |
| return 0; | |
| return set_table_resize(so, so->used>50000 ? so->used*2 : so->used*4); | |
| found_active: | |
| Py_DECREF(key); | |
| return 0; | |
| comparison_error: | |
| Py_DECREF(key); | |
| return -1; | |
| } | |
| static int | |
| set_add_entry(PySetObject *so, PyObject *key, Py_hash_t hash) | |
| { | |
| _Py_CRITICAL_SECTION_ASSERT_OBJECT_LOCKED(so); | |
| return set_add_entry_takeref(so, Py_NewRef(key), hash); | |
| } | |
| static void | |
| set_unhashable_type(PyObject *key) | |
| { | |
| PyObject *exc = PyErr_GetRaisedException(); | |
| assert(exc != NULL); | |
| if (!Py_IS_TYPE(exc, (PyTypeObject*)PyExc_TypeError)) { | |
| PyErr_SetRaisedException(exc); | |
| return; | |
| } | |
| PyErr_Format(PyExc_TypeError, | |
| "cannot use '%T' as a set element (%S)", | |
| key, exc); | |
| Py_DECREF(exc); | |
| } | |
| int | |
| _PySet_AddTakeRef(PySetObject *so, PyObject *key) | |
| { | |
| Py_hash_t hash = PyObject_Hash(key); | |
| if (hash == -1) { | |
| set_unhashable_type(key); | |
| Py_DECREF(key); | |
| return -1; | |
| } | |
| // We don't pre-increment here, the caller holds a strong | |
| // reference to the object which we are stealing. | |
| return set_add_entry_takeref(so, key, hash); | |
| } | |
| /* | |
| Internal routine used by set_table_resize() to insert an item which is | |
| known to be absent from the set. Besides the performance benefit, | |
| there is also safety benefit since using set_add_entry() risks making | |
| a callback in the middle of a set_table_resize(), see issue 1456209. | |
| The caller is responsible for updating the key's reference count and | |
| the setobject's fill and used fields. | |
| */ | |
| static void | |
| set_insert_clean(setentry *table, size_t mask, PyObject *key, Py_hash_t hash) | |
| { | |
| setentry *entry; | |
| size_t perturb = hash; | |
| size_t i = (size_t)hash & mask; | |
| size_t j; | |
| while (1) { | |
| entry = &table[i]; | |
| if (entry->key == NULL) | |
| goto found_null; | |
| if (i + LINEAR_PROBES <= mask) { | |
| for (j = 0; j < LINEAR_PROBES; j++) { | |
| entry++; | |
| if (entry->key == NULL) | |
| goto found_null; | |
| } | |
| } | |
| perturb >>= PERTURB_SHIFT; | |
| i = (i * 5 + 1 + perturb) & mask; | |
| } | |
| found_null: | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(entry->hash, hash); | |
| FT_ATOMIC_STORE_PTR_RELEASE(entry->key, key); | |
| } | |
| /* ======== End logic for probing the hash table ========================== */ | |
| /* ======================================================================== */ | |
| static int | |
| set_lookkey(PySetObject *so, PyObject *key, Py_hash_t hash, setentry **epp) | |
| { | |
| int status; | |
| if (PyFrozenSet_CheckExact(so)) { | |
| status = set_do_lookup(so, so->table, so->mask, key, hash, epp, | |
| set_compare_frozenset); | |
| } | |
| else { | |
| Py_BEGIN_CRITICAL_SECTION(so); | |
| do { | |
| status = set_do_lookup(so, so->table, so->mask, key, hash, epp, | |
| set_compare_entry_lock_held); | |
| } while (status == SET_LOOKKEY_CHANGED); | |
| Py_END_CRITICAL_SECTION(); | |
| } | |
| assert(status == SET_LOOKKEY_FOUND || | |
| status == SET_LOOKKEY_NO_MATCH || | |
| status == SET_LOOKKEY_ERROR); | |
| return status; | |
| } | |
| #ifdef Py_GIL_DISABLED | |
| static int | |
| set_lookkey_threadsafe(PySetObject *so, PyObject *key, Py_hash_t hash) | |
| { | |
| int status; | |
| setentry *entry; | |
| if (PyFrozenSet_CheckExact(so)) { | |
| status = set_do_lookup(so, so->table, so->mask, key, hash, &entry, | |
| set_compare_frozenset); | |
| assert(status == SET_LOOKKEY_FOUND || | |
| status == SET_LOOKKEY_NO_MATCH || | |
| status == SET_LOOKKEY_ERROR); | |
| return status; | |
| } | |
| ensure_shared_on_read(so); | |
| setentry *table = FT_ATOMIC_LOAD_PTR_ACQUIRE(so->table); | |
| size_t mask = FT_ATOMIC_LOAD_SSIZE_ACQUIRE(so->mask); | |
| if (table == NULL || table != FT_ATOMIC_LOAD_PTR_ACQUIRE(so->table)) { | |
| return set_lookkey(so, key, hash, &entry); | |
| } | |
| status = set_do_lookup(so, table, mask, key, hash, &entry, | |
| set_compare_threadsafe); | |
| if (status == SET_LOOKKEY_CHANGED) { | |
| return set_lookkey(so, key, hash, &entry); | |
| } | |
| assert(status == SET_LOOKKEY_FOUND || | |
| status == SET_LOOKKEY_NO_MATCH || | |
| status == SET_LOOKKEY_ERROR); | |
| return status; | |
| } | |
| #endif | |
| static void free_entries(setentry *entries, size_t size, bool use_qsbr) | |
| { | |
| #ifdef Py_GIL_DISABLED | |
| if (use_qsbr) { | |
| _PyMem_FreeDelayed(entries, size * sizeof(setentry)); | |
| return; | |
| } | |
| #endif | |
| PyMem_Free(entries); | |
| } | |
| /* | |
| Restructure the table by allocating a new table and reinserting all | |
| keys again. When entries have been deleted, the new table may | |
| actually be smaller than the old one. | |
| */ | |
| static int | |
| set_table_resize(PySetObject *so, Py_ssize_t minused) | |
| { | |
| setentry *oldtable, *newtable, *entry; | |
| Py_ssize_t oldmask = so->mask; | |
| Py_ssize_t oldsize = (size_t)oldmask + 1; | |
| size_t newmask; | |
| int is_oldtable_malloced; | |
| setentry small_copy[PySet_MINSIZE]; | |
| assert(minused >= 0); | |
| /* Find the smallest table size > minused. */ | |
| /* XXX speed-up with intrinsics */ | |
| size_t newsize = PySet_MINSIZE; | |
| while (newsize <= (size_t)minused) { | |
| newsize <<= 1; // The largest possible value is PY_SSIZE_T_MAX + 1. | |
| } | |
| /* Get space for a new table. */ | |
| oldtable = so->table; | |
| assert(oldtable != NULL); | |
| is_oldtable_malloced = oldtable != so->smalltable; | |
| if (newsize == PySet_MINSIZE) { | |
| /* A large table is shrinking, or we can't get any smaller. */ | |
| newtable = so->smalltable; | |
| if (newtable == oldtable) { | |
| if (so->fill == so->used) { | |
| /* No dummies, so no point doing anything. */ | |
| return 0; | |
| } | |
| /* We're not going to resize it, but rebuild the | |
| table anyway to purge old dummy entries. | |
| Subtle: This is *necessary* if fill==size, | |
| as set_lookkey needs at least one virgin slot to | |
| terminate failing searches. If fill < size, it's | |
| merely desirable, as dummies slow searches. */ | |
| assert(so->fill > so->used); | |
| memcpy(small_copy, oldtable, sizeof(small_copy)); | |
| oldtable = small_copy; | |
| } | |
| } | |
| else { | |
| newtable = PyMem_NEW(setentry, newsize); | |
| if (newtable == NULL) { | |
| PyErr_NoMemory(); | |
| return -1; | |
| } | |
| } | |
| /* Make the set empty, using the new table. */ | |
| assert(newtable != oldtable); | |
| set_zero_table(newtable, newsize); | |
| FT_ATOMIC_STORE_PTR_RELEASE(so->table, NULL); | |
| FT_ATOMIC_STORE_SSIZE_RELEASE(so->mask, newsize - 1); | |
| /* Copy the data over; this is refcount-neutral for active entries; | |
| dummy entries aren't copied over, of course */ | |
| newmask = (size_t)so->mask; | |
| if (so->fill == so->used) { | |
| for (entry = oldtable; entry <= oldtable + oldmask; entry++) { | |
| if (entry->key != NULL) { | |
| set_insert_clean(newtable, newmask, entry->key, entry->hash); | |
| } | |
| } | |
| } else { | |
| so->fill = so->used; | |
| for (entry = oldtable; entry <= oldtable + oldmask; entry++) { | |
| if (entry->key != NULL && entry->key != dummy) { | |
| set_insert_clean(newtable, newmask, entry->key, entry->hash); | |
| } | |
| } | |
| } | |
| FT_ATOMIC_STORE_PTR_RELEASE(so->table, newtable); | |
| if (is_oldtable_malloced) | |
| free_entries(oldtable, oldsize, SET_IS_SHARED(so)); | |
| return 0; | |
| } | |
| static int | |
| set_contains_entry(PySetObject *so, PyObject *key, Py_hash_t hash) | |
| { | |
| #ifdef Py_GIL_DISABLED | |
| return set_lookkey_threadsafe(so, key, hash); | |
| #else | |
| setentry *entry; // unused | |
| return set_lookkey(so, key, hash, &entry); | |
| #endif | |
| } | |
| #define DISCARD_NOTFOUND 0 | |
| #define DISCARD_FOUND 1 | |
| static int | |
| set_discard_entry(PySetObject *so, PyObject *key, Py_hash_t hash) | |
| { | |
| setentry *entry; | |
| PyObject *old_key; | |
| int status = set_lookkey(so, key, hash, &entry); | |
| if (status < 0) { | |
| return -1; | |
| } | |
| if (status == SET_LOOKKEY_NO_MATCH) { | |
| return DISCARD_NOTFOUND; | |
| } | |
| assert(status == SET_LOOKKEY_FOUND); | |
| old_key = entry->key; | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(entry->hash, -1); | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(so->used, so->used - 1); | |
| FT_ATOMIC_STORE_PTR_RELEASE(entry->key, dummy); | |
| Py_DECREF(old_key); | |
| return DISCARD_FOUND; | |
| } | |
| static int | |
| set_add_key(PySetObject *so, PyObject *key) | |
| { | |
| Py_hash_t hash = PyObject_Hash(key); | |
| if (hash == -1) { | |
| set_unhashable_type(key); | |
| return -1; | |
| } | |
| return set_add_entry(so, key, hash); | |
| } | |
| static int | |
| set_contains_key(PySetObject *so, PyObject *key) | |
| { | |
| Py_hash_t hash = PyObject_Hash(key); | |
| if (hash == -1) { | |
| set_unhashable_type(key); | |
| return -1; | |
| } | |
| return set_contains_entry(so, key, hash); | |
| } | |
| static int | |
| set_discard_key(PySetObject *so, PyObject *key) | |
| { | |
| Py_hash_t hash = PyObject_Hash(key); | |
| if (hash == -1) { | |
| set_unhashable_type(key); | |
| return -1; | |
| } | |
| return set_discard_entry(so, key, hash); | |
| } | |
| static void | |
| set_empty_to_minsize(PySetObject *so) | |
| { | |
| FT_ATOMIC_STORE_PTR_RELEASE(so->table, NULL); | |
| set_zero_table(so->smalltable, PySet_MINSIZE); | |
| so->fill = 0; | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(so->used, 0); | |
| FT_ATOMIC_STORE_SSIZE_RELEASE(so->mask, PySet_MINSIZE - 1); | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(so->hash, -1); | |
| FT_ATOMIC_STORE_PTR_RELEASE(so->table, so->smalltable); | |
| } | |
| static int | |
| set_clear_internal(PyObject *self) | |
| { | |
| PySetObject *so = _PySet_CAST(self); | |
| setentry *entry; | |
| setentry *table = so->table; | |
| Py_ssize_t fill = so->fill; | |
| Py_ssize_t used = so->used; | |
| Py_ssize_t oldsize = (size_t)so->mask + 1; | |
| int table_is_malloced = table != so->smalltable; | |
| setentry small_copy[PySet_MINSIZE]; | |
| assert (PyAnySet_Check(so)); | |
| assert(table != NULL); | |
| /* This is delicate. During the process of clearing the set, | |
| * decrefs can cause the set to mutate. To avoid fatal confusion | |
| * (voice of experience), we have to make the set empty before | |
| * clearing the slots, and never refer to anything via so->ref while | |
| * clearing. | |
| */ | |
| if (table_is_malloced) | |
| set_empty_to_minsize(so); | |
| else if (fill > 0) { | |
| /* It's a small table with something that needs to be cleared. | |
| * Afraid the only safe way is to copy the set entries into | |
| * another small table first. | |
| */ | |
| memcpy(small_copy, table, sizeof(small_copy)); | |
| table = small_copy; | |
| set_empty_to_minsize(so); | |
| } | |
| /* else it's a small table that's already empty */ | |
| /* Now we can finally clear things. If C had refcounts, we could | |
| * assert that the refcount on table is 1 now, i.e. that this function | |
| * has unique access to it, so decref side-effects can't alter it. | |
| */ | |
| for (entry = table; used > 0; entry++) { | |
| if (entry->key && entry->key != dummy) { | |
| used--; | |
| Py_DECREF(entry->key); | |
| } | |
| } | |
| if (table_is_malloced) | |
| free_entries(table, oldsize, SET_IS_SHARED(so)); | |
| return 0; | |
| } | |
| /* | |
| * Iterate over a set table. Use like so: | |
| * | |
| * Py_ssize_t pos; | |
| * setentry *entry; | |
| * pos = 0; # important! pos should not otherwise be changed by you | |
| * while (set_next(yourset, &pos, &entry)) { | |
| * Refer to borrowed reference in entry->key. | |
| * } | |
| * | |
| * CAUTION: In general, it isn't safe to use set_next in a loop that | |
| * mutates the table. | |
| */ | |
| static int | |
| set_next(PySetObject *so, Py_ssize_t *pos_ptr, setentry **entry_ptr) | |
| { | |
| Py_ssize_t i; | |
| Py_ssize_t mask; | |
| setentry *entry; | |
| assert (PyAnySet_Check(so)); | |
| i = *pos_ptr; | |
| assert(i >= 0); | |
| mask = so->mask; | |
| entry = &so->table[i]; | |
| while (i <= mask && (entry->key == NULL || entry->key == dummy)) { | |
| i++; | |
| entry++; | |
| } | |
| *pos_ptr = i+1; | |
| if (i > mask) | |
| return 0; | |
| assert(entry != NULL); | |
| *entry_ptr = entry; | |
| return 1; | |
| } | |
| static void | |
| set_dealloc(PyObject *self) | |
| { | |
| PySetObject *so = _PySet_CAST(self); | |
| setentry *entry; | |
| Py_ssize_t used = so->used; | |
| Py_ssize_t oldsize = (size_t)so->mask + 1; | |
| /* bpo-31095: UnTrack is needed before calling any callbacks */ | |
| PyObject_GC_UnTrack(so); | |
| FT_CLEAR_WEAKREFS(self, so->weakreflist); | |
| for (entry = so->table; used > 0; entry++) { | |
| if (entry->key && entry->key != dummy) { | |
| used--; | |
| Py_DECREF(entry->key); | |
| } | |
| } | |
| if (so->table != so->smalltable) | |
| free_entries(so->table, oldsize, SET_IS_SHARED(so)); | |
| Py_TYPE(so)->tp_free(so); | |
| } | |
| static PyObject * | |
| set_repr_lock_held(PySetObject *so) | |
| { | |
| PyObject *result=NULL, *keys, *listrepr, *tmp; | |
| int status = Py_ReprEnter((PyObject*)so); | |
| if (status != 0) { | |
| if (status < 0) | |
| return NULL; | |
| return PyUnicode_FromFormat("%s(...)", Py_TYPE(so)->tp_name); | |
| } | |
| /* shortcut for the empty set */ | |
| if (!so->used) { | |
| Py_ReprLeave((PyObject*)so); | |
| return PyUnicode_FromFormat("%s()", Py_TYPE(so)->tp_name); | |
| } | |
| // gh-129967: avoid PySequence_List because it might re-lock the object | |
| // lock or the GIL and allow something to clear the set from underneath us. | |
| keys = PyList_New(so->used); | |
| if (keys == NULL) { | |
| goto done; | |
| } | |
| Py_ssize_t pos = 0, idx = 0; | |
| setentry *entry; | |
| while (set_next(so, &pos, &entry)) { | |
| PyList_SET_ITEM(keys, idx++, Py_NewRef(entry->key)); | |
| } | |
| /* repr(keys)[1:-1] */ | |
| listrepr = PyObject_Repr(keys); | |
| Py_DECREF(keys); | |
| if (listrepr == NULL) | |
| goto done; | |
| tmp = PyUnicode_Substring(listrepr, 1, PyUnicode_GET_LENGTH(listrepr)-1); | |
| Py_DECREF(listrepr); | |
| if (tmp == NULL) | |
| goto done; | |
| listrepr = tmp; | |
| if (!PySet_CheckExact(so)) | |
| result = PyUnicode_FromFormat("%s({%U})", | |
| Py_TYPE(so)->tp_name, | |
| listrepr); | |
| else | |
| result = PyUnicode_FromFormat("{%U}", listrepr); | |
| Py_DECREF(listrepr); | |
| done: | |
| Py_ReprLeave((PyObject*)so); | |
| return result; | |
| } | |
| static PyObject * | |
| set_repr(PyObject *self) | |
| { | |
| PySetObject *so = _PySet_CAST(self); | |
| PyObject *result; | |
| Py_BEGIN_CRITICAL_SECTION(so); | |
| result = set_repr_lock_held(so); | |
| Py_END_CRITICAL_SECTION(); | |
| return result; | |
| } | |
| static Py_ssize_t | |
| set_len(PyObject *self) | |
| { | |
| PySetObject *so = _PySet_CAST(self); | |
| return FT_ATOMIC_LOAD_SSIZE_RELAXED(so->used); | |
| } | |
| static int | |
| set_merge_lock_held(PySetObject *so, PyObject *otherset) | |
| { | |
| PySetObject *other; | |
| PyObject *key; | |
| Py_ssize_t i; | |
| setentry *so_entry; | |
| setentry *other_entry; | |
| assert (PyAnySet_Check(so)); | |
| _Py_CRITICAL_SECTION_ASSERT_OBJECT_LOCKED(so); | |
| _Py_CRITICAL_SECTION_ASSERT_OBJECT_LOCKED(otherset); | |
| other = _PySet_CAST(otherset); | |
| if (other == so || other->used == 0) | |
| /* a.update(a) or a.update(set()); nothing to do */ | |
| return 0; | |
| /* Do one big resize at the start, rather than | |
| * incrementally resizing as we insert new keys. Expect | |
| * that there will be no (or few) overlapping keys. | |
| */ | |
| if ((so->fill + other->used)*5 >= so->mask*3) { | |
| if (set_table_resize(so, (so->used + other->used)*2) != 0) | |
| return -1; | |
| } | |
| so_entry = so->table; | |
| other_entry = other->table; | |
| /* If our table is empty, and both tables have the same size, and | |
| there are no dummies to eliminate, then just copy the pointers. */ | |
| if (so->fill == 0 && so->mask == other->mask && other->fill == other->used) { | |
| for (i = 0; i <= other->mask; i++, so_entry++, other_entry++) { | |
| key = other_entry->key; | |
| if (key != NULL) { | |
| assert(so_entry->key == NULL); | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(so_entry->hash, other_entry->hash); | |
| FT_ATOMIC_STORE_PTR_RELEASE(so_entry->key, Py_NewRef(key)); | |
| } | |
| } | |
| so->fill = other->fill; | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(so->used, other->used); | |
| return 0; | |
| } | |
| /* If our table is empty, we can use set_insert_clean() */ | |
| if (so->fill == 0) { | |
| setentry *newtable = so->table; | |
| size_t newmask = (size_t)so->mask; | |
| so->fill = other->used; | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(so->used, other->used); | |
| for (i = other->mask + 1; i > 0 ; i--, other_entry++) { | |
| key = other_entry->key; | |
| if (key != NULL && key != dummy) { | |
| set_insert_clean(newtable, newmask, Py_NewRef(key), | |
| other_entry->hash); | |
| } | |
| } | |
| return 0; | |
| } | |
| /* We can't assure there are no duplicates, so do normal insertions */ | |
| for (i = 0; i <= other->mask; i++) { | |
| other_entry = &other->table[i]; | |
| key = other_entry->key; | |
| if (key != NULL && key != dummy) { | |
| if (set_add_entry(so, key, other_entry->hash)) | |
| return -1; | |
| } | |
| } | |
| return 0; | |
| } | |
| /*[clinic input] | |
| @critical_section | |
| set.pop | |
| so: setobject | |
| Remove and return an arbitrary set element. | |
| Raises KeyError if the set is empty. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| set_pop_impl(PySetObject *so) | |
| /*[clinic end generated code: output=4d65180f1271871b input=9296c84921125060]*/ | |
| { | |
| /* Make sure the search finger is in bounds */ | |
| setentry *entry = so->table + (so->finger & so->mask); | |
| setentry *limit = so->table + so->mask; | |
| PyObject *key; | |
| if (so->used == 0) { | |
| PyErr_SetString(PyExc_KeyError, "pop from an empty set"); | |
| return NULL; | |
| } | |
| while (entry->key == NULL || entry->key==dummy) { | |
| entry++; | |
| if (entry > limit) | |
| entry = so->table; | |
| } | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(entry->hash, -1); | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(so->used, so->used - 1); | |
| key = entry->key; | |
| FT_ATOMIC_STORE_PTR_RELEASE(entry->key, dummy); | |
| so->finger = entry - so->table + 1; /* next place to start */ | |
| return key; | |
| } | |
| static int | |
| set_traverse(PyObject *self, visitproc visit, void *arg) | |
| { | |
| PySetObject *so = _PySet_CAST(self); | |
| Py_ssize_t pos = 0; | |
| setentry *entry; | |
| while (set_next(so, &pos, &entry)) | |
| Py_VISIT(entry->key); | |
| return 0; | |
| } | |
| /* Work to increase the bit dispersion for closely spaced hash values. | |
| This is important because some use cases have many combinations of a | |
| small number of elements with nearby hashes so that many distinct | |
| combinations collapse to only a handful of distinct hash values. */ | |
| static Py_uhash_t | |
| _shuffle_bits(Py_uhash_t h) | |
| { | |
| return ((h ^ 89869747UL) ^ (h << 16)) * 3644798167UL; | |
| } | |
| /* Most of the constants in this hash algorithm are randomly chosen | |
| large primes with "interesting bit patterns" and that passed tests | |
| for good collision statistics on a variety of problematic datasets | |
| including powersets and graph structures (such as David Eppstein's | |
| graph recipes in Lib/test/test_set.py). | |
| This hash algorithm can be used on either a frozenset or a set. | |
| When it is used on a set, it computes the hash value of the equivalent | |
| frozenset without creating a new frozenset object. | |
| If you update this code, update also frozendict_hash() which copied this | |
| code. */ | |
| static Py_hash_t | |
| frozenset_hash_impl(PyObject *self) | |
| { | |
| PySetObject *so = _PySet_CAST(self); | |
| Py_uhash_t hash = 0; | |
| setentry *entry; | |
| /* Xor-in shuffled bits from every entry's hash field because xor is | |
| commutative and a frozenset hash should be independent of order. | |
| For speed, include null entries and dummy entries and then | |
| subtract out their effect afterwards so that the final hash | |
| depends only on active entries. This allows the code to be | |
| vectorized by the compiler and it saves the unpredictable | |
| branches that would arise when trying to exclude null and dummy | |
| entries on every iteration. */ | |
| for (entry = so->table; entry <= &so->table[so->mask]; entry++) | |
| hash ^= _shuffle_bits(entry->hash); | |
| /* Remove the effect of an odd number of NULL entries */ | |
| if ((so->mask + 1 - so->fill) & 1) | |
| hash ^= _shuffle_bits(0); | |
| /* Remove the effect of an odd number of dummy entries */ | |
| if ((so->fill - so->used) & 1) | |
| hash ^= _shuffle_bits(-1); | |
| /* Factor in the number of active entries */ | |
| hash ^= ((Py_uhash_t)PySet_GET_SIZE(self) + 1) * 1927868237UL; | |
| /* Disperse patterns arising in nested frozensets */ | |
| hash ^= (hash >> 11) ^ (hash >> 25); | |
| hash = hash * 69069U + 907133923UL; | |
| /* -1 is reserved as an error code */ | |
| if (hash == (Py_uhash_t)-1) | |
| hash = 590923713UL; | |
| return (Py_hash_t)hash; | |
| } | |
| static Py_hash_t | |
| frozenset_hash(PyObject *self) | |
| { | |
| PySetObject *so = _PySet_CAST(self); | |
| Py_uhash_t hash; | |
| if (FT_ATOMIC_LOAD_SSIZE_RELAXED(so->hash) != -1) { | |
| return FT_ATOMIC_LOAD_SSIZE_ACQUIRE(so->hash); | |
| } | |
| hash = frozenset_hash_impl(self); | |
| FT_ATOMIC_STORE_SSIZE_RELEASE(so->hash, hash); | |
| return hash; | |
| } | |
| /***** Set iterator type ***********************************************/ | |
| typedef struct { | |
| PyObject_HEAD | |
| PySetObject *si_set; /* Set to NULL when iterator is exhausted */ | |
| Py_ssize_t si_used; | |
| Py_ssize_t si_pos; | |
| Py_ssize_t len; | |
| } setiterobject; | |
| static void | |
| setiter_dealloc(PyObject *self) | |
| { | |
| setiterobject *si = (setiterobject*)self; | |
| /* bpo-31095: UnTrack is needed before calling any callbacks */ | |
| _PyObject_GC_UNTRACK(si); | |
| Py_XDECREF(si->si_set); | |
| PyObject_GC_Del(si); | |
| } | |
| static int | |
| setiter_traverse(PyObject *self, visitproc visit, void *arg) | |
| { | |
| setiterobject *si = (setiterobject*)self; | |
| Py_VISIT(si->si_set); | |
| return 0; | |
| } | |
| static PyObject * | |
| setiter_len(PyObject *op, PyObject *Py_UNUSED(ignored)) | |
| { | |
| setiterobject *si = (setiterobject*)op; | |
| Py_ssize_t len = 0; | |
| if (si->si_set != NULL && si->si_used == si->si_set->used) | |
| len = si->len; | |
| return PyLong_FromSsize_t(len); | |
| } | |
| PyDoc_STRVAR(length_hint_doc, "Private method returning an estimate of len(list(it))."); | |
| static PyObject * | |
| setiter_reduce(PyObject *op, PyObject *Py_UNUSED(ignored)) | |
| { | |
| setiterobject *si = (setiterobject*)op; | |
| /* copy the iterator state */ | |
| setiterobject tmp = *si; | |
| Py_XINCREF(tmp.si_set); | |
| /* iterate the temporary into a list */ | |
| PyObject *list = PySequence_List((PyObject*)&tmp); | |
| Py_XDECREF(tmp.si_set); | |
| if (list == NULL) { | |
| return NULL; | |
| } | |
| return Py_BuildValue("N(N)", _PyEval_GetBuiltin(&_Py_ID(iter)), list); | |
| } | |
| PyDoc_STRVAR(reduce_doc, "Return state information for pickling."); | |
| static PyMethodDef setiter_methods[] = { | |
| {"__length_hint__", setiter_len, METH_NOARGS, length_hint_doc}, | |
| {"__reduce__", setiter_reduce, METH_NOARGS, reduce_doc}, | |
| {NULL, NULL} /* sentinel */ | |
| }; | |
| static PyObject *setiter_iternext(PyObject *self) | |
| { | |
| setiterobject *si = (setiterobject*)self; | |
| PyObject *key = NULL; | |
| Py_ssize_t i, mask; | |
| setentry *entry; | |
| PySetObject *so = si->si_set; | |
| if (so == NULL) | |
| return NULL; | |
| assert (PyAnySet_Check(so)); | |
| Py_ssize_t so_used = FT_ATOMIC_LOAD_SSIZE_RELAXED(so->used); | |
| Py_ssize_t si_used = FT_ATOMIC_LOAD_SSIZE_RELAXED(si->si_used); | |
| if (si_used != so_used) { | |
| PyErr_SetString(PyExc_RuntimeError, | |
| "Set changed size during iteration"); | |
| si->si_used = -1; /* Make this state sticky */ | |
| return NULL; | |
| } | |
| Py_BEGIN_CRITICAL_SECTION(so); | |
| i = si->si_pos; | |
| assert(i>=0); | |
| entry = so->table; | |
| mask = so->mask; | |
| while (i <= mask && (entry[i].key == NULL || entry[i].key == dummy)) { | |
| i++; | |
| } | |
| if (i <= mask) { | |
| key = Py_NewRef(entry[i].key); | |
| } | |
| Py_END_CRITICAL_SECTION(); | |
| si->si_pos = i+1; | |
| if (key == NULL) { | |
| si->si_set = NULL; | |
| Py_DECREF(so); | |
| return NULL; | |
| } | |
| si->len--; | |
| return key; | |
| } | |
| PyTypeObject PySetIter_Type = { | |
| PyVarObject_HEAD_INIT(&PyType_Type, 0) | |
| "set_iterator", /* tp_name */ | |
| sizeof(setiterobject), /* tp_basicsize */ | |
| 0, /* tp_itemsize */ | |
| /* methods */ | |
| setiter_dealloc, /* tp_dealloc */ | |
| 0, /* tp_vectorcall_offset */ | |
| 0, /* tp_getattr */ | |
| 0, /* tp_setattr */ | |
| 0, /* tp_as_async */ | |
| 0, /* tp_repr */ | |
| 0, /* tp_as_number */ | |
| 0, /* tp_as_sequence */ | |
| 0, /* tp_as_mapping */ | |
| 0, /* tp_hash */ | |
| 0, /* tp_call */ | |
| 0, /* tp_str */ | |
| PyObject_GenericGetAttr, /* tp_getattro */ | |
| 0, /* tp_setattro */ | |
| 0, /* tp_as_buffer */ | |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_HAVE_GC, /* tp_flags */ | |
| 0, /* tp_doc */ | |
| setiter_traverse, /* tp_traverse */ | |
| 0, /* tp_clear */ | |
| 0, /* tp_richcompare */ | |
| 0, /* tp_weaklistoffset */ | |
| PyObject_SelfIter, /* tp_iter */ | |
| setiter_iternext, /* tp_iternext */ | |
| setiter_methods, /* tp_methods */ | |
| 0, | |
| }; | |
| static PyObject * | |
| set_iter(PyObject *so) | |
| { | |
| Py_ssize_t size = set_len(so); | |
| setiterobject *si = PyObject_GC_New(setiterobject, &PySetIter_Type); | |
| if (si == NULL) | |
| return NULL; | |
| si->si_set = (PySetObject*)Py_NewRef(so); | |
| si->si_used = size; | |
| si->si_pos = 0; | |
| si->len = size; | |
| _PyObject_GC_TRACK(si); | |
| return (PyObject *)si; | |
| } | |
| static int | |
| set_update_dict_lock_held(PySetObject *so, PyObject *other) | |
| { | |
| assert(PyAnyDict_CheckExact(other)); | |
| _Py_CRITICAL_SECTION_ASSERT_OBJECT_LOCKED(so); | |
| #ifdef Py_DEBUG | |
| if (!PyFrozenDict_CheckExact(other)) { | |
| _Py_CRITICAL_SECTION_ASSERT_OBJECT_LOCKED(other); | |
| } | |
| #endif | |
| /* Do one big resize at the start, rather than | |
| * incrementally resizing as we insert new keys. Expect | |
| * that there will be no (or few) overlapping keys. | |
| */ | |
| Py_ssize_t dictsize = PyDict_GET_SIZE(other); | |
| if ((so->fill + dictsize)*5 >= so->mask*3) { | |
| if (set_table_resize(so, (so->used + dictsize)*2) != 0) { | |
| return -1; | |
| } | |
| } | |
| Py_ssize_t pos = 0; | |
| PyObject *key; | |
| PyObject *value; | |
| Py_hash_t hash; | |
| while (_PyDict_Next(other, &pos, &key, &value, &hash)) { | |
| if (set_add_entry(so, key, hash)) { | |
| return -1; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int | |
| set_update_iterable_lock_held(PySetObject *so, PyObject *other) | |
| { | |
| _Py_CRITICAL_SECTION_ASSERT_OBJECT_LOCKED(so); | |
| PyObject *it = PyObject_GetIter(other); | |
| if (it == NULL) { | |
| return -1; | |
| } | |
| PyObject *key; | |
| while ((key = PyIter_Next(it)) != NULL) { | |
| if (set_add_key(so, key)) { | |
| Py_DECREF(it); | |
| Py_DECREF(key); | |
| return -1; | |
| } | |
| Py_DECREF(key); | |
| } | |
| Py_DECREF(it); | |
| if (PyErr_Occurred()) | |
| return -1; | |
| return 0; | |
| } | |
| static int | |
| set_update_lock_held(PySetObject *so, PyObject *other) | |
| { | |
| if (PyAnySet_Check(other)) { | |
| return set_merge_lock_held(so, other); | |
| } | |
| else if (PyAnyDict_CheckExact(other)) { | |
| return set_update_dict_lock_held(so, other); | |
| } | |
| return set_update_iterable_lock_held(so, other); | |
| } | |
| // set_update for a `so` that is only visible to the current thread | |
| static int | |
| set_update_local(PySetObject *so, PyObject *other) | |
| { | |
| assert(Py_REFCNT(so) == 1); | |
| if (PyAnySet_Check(other)) { | |
| int rv; | |
| Py_BEGIN_CRITICAL_SECTION(other); | |
| rv = set_merge_lock_held(so, other); | |
| Py_END_CRITICAL_SECTION(); | |
| return rv; | |
| } | |
| else if (PyDict_CheckExact(other)) { | |
| int rv; | |
| Py_BEGIN_CRITICAL_SECTION(other); | |
| rv = set_update_dict_lock_held(so, other); | |
| Py_END_CRITICAL_SECTION(); | |
| return rv; | |
| } | |
| else if (PyFrozenDict_CheckExact(other)) { | |
| return set_update_dict_lock_held(so, other); | |
| } | |
| return set_update_iterable_lock_held(so, other); | |
| } | |
| static int | |
| set_update_internal(PySetObject *so, PyObject *other) | |
| { | |
| if (PyAnySet_Check(other)) { | |
| if (Py_Is((PyObject *)so, other)) { | |
| return 0; | |
| } | |
| int rv; | |
| Py_BEGIN_CRITICAL_SECTION2(so, other); | |
| rv = set_merge_lock_held(so, other); | |
| Py_END_CRITICAL_SECTION2(); | |
| return rv; | |
| } | |
| else if (PyDict_CheckExact(other)) { | |
| int rv; | |
| Py_BEGIN_CRITICAL_SECTION2(so, other); | |
| rv = set_update_dict_lock_held(so, other); | |
| Py_END_CRITICAL_SECTION2(); | |
| return rv; | |
| } | |
| else if (PyFrozenDict_CheckExact(other)) { | |
| int rv; | |
| Py_BEGIN_CRITICAL_SECTION(so); | |
| rv = set_update_dict_lock_held(so, other); | |
| Py_END_CRITICAL_SECTION(); | |
| return rv; | |
| } | |
| else { | |
| int rv; | |
| Py_BEGIN_CRITICAL_SECTION(so); | |
| rv = set_update_iterable_lock_held(so, other); | |
| Py_END_CRITICAL_SECTION(); | |
| return rv; | |
| } | |
| } | |
| /*[clinic input] | |
| set.update | |
| so: setobject | |
| *others: array | |
| Update the set, adding elements from all others. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| set_update_impl(PySetObject *so, PyObject * const *others, | |
| Py_ssize_t others_length) | |
| /*[clinic end generated code: output=017c781c992d5c23 input=ed5d78885b076636]*/ | |
| { | |
| Py_ssize_t i; | |
| for (i = 0; i < others_length; i++) { | |
| PyObject *other = others[i]; | |
| if (set_update_internal(so, other)) | |
| return NULL; | |
| } | |
| Py_RETURN_NONE; | |
| } | |
| /* XXX Todo: | |
| If aligned memory allocations become available, make the | |
| set object 64 byte aligned so that most of the fields | |
| can be retrieved or updated in a single cache line. | |
| */ | |
| // Build a set/frozenset left GC-untracked; the caller must _PyObject_GC_TRACK() | |
| // it once fully built, so a half-built set is never exposed during filling. | |
| static PyObject * | |
| make_new_set_untracked(PyTypeObject *type, PyObject *iterable) | |
| { | |
| assert(PyType_Check(type)); | |
| PySetObject *so; | |
| so = (PySetObject *)_PyType_AllocNoTrack(type, 0); | |
| if (so == NULL) | |
| return NULL; | |
| so->fill = 0; | |
| so->used = 0; | |
| so->mask = PySet_MINSIZE - 1; | |
| so->table = so->smalltable; | |
| so->hash = -1; | |
| so->finger = 0; | |
| so->weakreflist = NULL; | |
| if (iterable != NULL) { | |
| if (set_update_local(so, iterable)) { | |
| Py_DECREF(so); | |
| return NULL; | |
| } | |
| } | |
| return (PyObject *)so; | |
| } | |
| static PyObject * | |
| make_new_set(PyTypeObject *type, PyObject *iterable) | |
| { | |
| PyObject *so = make_new_set_untracked(type, iterable); | |
| if (so != NULL) { | |
| _PyObject_GC_TRACK(so); | |
| } | |
| return so; | |
| } | |
| static PyObject * | |
| make_new_set_basetype_untracked(PyTypeObject *type, PyObject *iterable) | |
| { | |
| if (type != &PySet_Type && type != &PyFrozenSet_Type) { | |
| if (PyType_IsSubtype(type, &PySet_Type)) | |
| type = &PySet_Type; | |
| else | |
| type = &PyFrozenSet_Type; | |
| } | |
| return make_new_set_untracked(type, iterable); | |
| } | |
| static PyObject * | |
| make_new_set_basetype(PyTypeObject *type, PyObject *iterable) | |
| { | |
| PyObject *so = make_new_set_basetype_untracked(type, iterable); | |
| if (so != NULL) { | |
| _PyObject_GC_TRACK(so); | |
| } | |
| return so; | |
| } | |
| // gh-140232: check whether a frozenset can be untracked from the GC | |
| static void | |
| _PyFrozenSet_MaybeUntrack(PyObject *op) | |
| { | |
| assert(op != NULL); | |
| // subclasses of a frozenset can generate reference cycles, so do not untrack | |
| if (!PyFrozenSet_CheckExact(op)) { | |
| return; | |
| } | |
| // if no elements of a frozenset are tracked by the GC, we untrack the object | |
| Py_ssize_t pos = 0; | |
| setentry *entry; | |
| while (set_next((PySetObject *)op, &pos, &entry)) { | |
| if (_PyObject_GC_MAY_BE_TRACKED(entry->key)) { | |
| return; | |
| } | |
| } | |
| _PyObject_GC_UNTRACK(op); | |
| } | |
| static PyObject * | |
| make_new_frozenset(PyTypeObject *type, PyObject *iterable) | |
| { | |
| if (type != &PyFrozenSet_Type) { | |
| return make_new_set(type, iterable); | |
| } | |
| if (iterable != NULL && PyFrozenSet_CheckExact(iterable)) { | |
| /* frozenset(f) is idempotent */ | |
| return Py_NewRef(iterable); | |
| } | |
| PyObject *obj = make_new_set(type, iterable); | |
| if (obj != NULL) { | |
| _PyFrozenSet_MaybeUntrack(obj); | |
| } | |
| return obj; | |
| } | |
| static PyObject * | |
| frozenset_new(PyTypeObject *type, PyObject *args, PyObject *kwds) | |
| { | |
| PyObject *iterable = NULL; | |
| if ((type == &PyFrozenSet_Type || | |
| type->tp_init == PyFrozenSet_Type.tp_init) && | |
| !_PyArg_NoKeywords("frozenset", kwds)) { | |
| return NULL; | |
| } | |
| if (!PyArg_UnpackTuple(args, type->tp_name, 0, 1, &iterable)) { | |
| return NULL; | |
| } | |
| return make_new_frozenset(type, iterable); | |
| } | |
| static PyObject * | |
| frozenset_vectorcall(PyObject *type, PyObject * const*args, | |
| size_t nargsf, PyObject *kwnames) | |
| { | |
| if (!_PyArg_NoKwnames("frozenset", kwnames)) { | |
| return NULL; | |
| } | |
| Py_ssize_t nargs = PyVectorcall_NARGS(nargsf); | |
| if (!_PyArg_CheckPositional("frozenset", nargs, 0, 1)) { | |
| return NULL; | |
| } | |
| PyObject *iterable = (nargs ? args[0] : NULL); | |
| return make_new_frozenset(_PyType_CAST(type), iterable); | |
| } | |
| static PyObject * | |
| set_new(PyTypeObject *type, PyObject *args, PyObject *kwds) | |
| { | |
| return make_new_set(type, NULL); | |
| } | |
| #ifdef Py_GIL_DISABLED | |
| static void | |
| copy_small_table(setentry *dest, setentry *src) | |
| { | |
| for (Py_ssize_t i = 0; i < PySet_MINSIZE; i++) { | |
| _Py_atomic_store_ptr_release(&dest[i].key, src[i].key); | |
| _Py_atomic_store_ssize_relaxed(&dest[i].hash, src[i].hash); | |
| } | |
| } | |
| #endif | |
| /* set_swap_bodies() switches the contents of any two sets by moving their | |
| internal data pointers and, if needed, copying the internal smalltables. | |
| Semantically equivalent to: | |
| t=set(a); a.clear(); a.update(b); b.clear(); b.update(t); del t | |
| The function always succeeds and it leaves both objects in a stable state. | |
| Useful for operations that update in-place (by allowing an intermediate | |
| result to be swapped into one of the original inputs). | |
| */ | |
| static void | |
| set_swap_bodies(PySetObject *a, PySetObject *b) | |
| { | |
| Py_ssize_t t; | |
| setentry *u; | |
| setentry tab[PySet_MINSIZE]; | |
| Py_hash_t h; | |
| setentry *a_table = a->table; | |
| setentry *b_table = b->table; | |
| FT_ATOMIC_STORE_PTR_RELEASE(a->table, NULL); | |
| FT_ATOMIC_STORE_PTR_RELEASE(b->table, NULL); | |
| t = a->fill; a->fill = b->fill; b->fill = t; | |
| t = a->used; | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(a->used, b->used); | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(b->used, t); | |
| t = a->mask; | |
| FT_ATOMIC_STORE_SSIZE_RELEASE(a->mask, b->mask); | |
| FT_ATOMIC_STORE_SSIZE_RELEASE(b->mask, t); | |
| u = a_table; | |
| if (a_table == a->smalltable) | |
| u = b->smalltable; | |
| a_table = b_table; | |
| if (b_table == b->smalltable) | |
| a_table = a->smalltable; | |
| b_table = u; | |
| if (a_table == a->smalltable || b_table == b->smalltable) { | |
| memcpy(tab, a->smalltable, sizeof(tab)); | |
| #ifndef Py_GIL_DISABLED | |
| memcpy(a->smalltable, b->smalltable, sizeof(tab)); | |
| memcpy(b->smalltable, tab, sizeof(tab)); | |
| #else | |
| copy_small_table(a->smalltable, b->smalltable); | |
| copy_small_table(b->smalltable, tab); | |
| #endif | |
| } | |
| if (PyType_IsSubtype(Py_TYPE(a), &PyFrozenSet_Type) && | |
| PyType_IsSubtype(Py_TYPE(b), &PyFrozenSet_Type)) { | |
| h = FT_ATOMIC_LOAD_SSIZE_RELAXED(a->hash); | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(a->hash, FT_ATOMIC_LOAD_SSIZE_RELAXED(b->hash)); | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(b->hash, h); | |
| } else { | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(a->hash, -1); | |
| FT_ATOMIC_STORE_SSIZE_RELAXED(b->hash, -1); | |
| } | |
| if (!SET_IS_SHARED(b) && SET_IS_SHARED(a)) { | |
| SET_MARK_SHARED(b); | |
| } | |
| if (!SET_IS_SHARED(a) && SET_IS_SHARED(b)) { | |
| SET_MARK_SHARED(a); | |
| } | |
| FT_ATOMIC_STORE_PTR_RELEASE(a->table, a_table); | |
| FT_ATOMIC_STORE_PTR_RELEASE(b->table, b_table); | |
| } | |
| PyObject * | |
| _PySet_Freeze(PyObject *set) | |
| { | |
| assert(set != NULL); | |
| assert(PySet_CheckExact(set)); | |
| assert(_PyObject_IsUniquelyReferenced(set)); | |
| set->ob_type = &PyFrozenSet_Type; | |
| return Py_NewRef(set); | |
| } | |
| static PyObject * | |
| set_copy_untracked_lock_held(PySetObject *so) | |
| { | |
| _Py_CRITICAL_SECTION_ASSERT_OBJECT_LOCKED(so); | |
| PyObject *copy = make_new_set_basetype_untracked(Py_TYPE(so), NULL); | |
| if (copy == NULL) { | |
| return NULL; | |
| } | |
| if (set_merge_lock_held((PySetObject *)copy, (PyObject *)so) < 0) { | |
| Py_DECREF(copy); | |
| return NULL; | |
| } | |
| return copy; | |
| } | |
| /*[clinic input] | |
| @critical_section | |
| set.copy | |
| so: setobject | |
| Return a shallow copy of a set. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| set_copy_impl(PySetObject *so) | |
| /*[clinic end generated code: output=c9223a1e1cc6b041 input=c169a4fbb8209257]*/ | |
| { | |
| PyObject *copy = set_copy_untracked_lock_held(so); | |
| if (copy != NULL) { | |
| _PyObject_GC_TRACK(copy); | |
| } | |
| return copy; | |
| } | |
| /*[clinic input] | |
| @critical_section | |
| frozenset.copy | |
| so: setobject | |
| Return a shallow copy of a set. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| frozenset_copy_impl(PySetObject *so) | |
| /*[clinic end generated code: output=b356263526af9e70 input=fbf5bef131268dd7]*/ | |
| { | |
| if (PyFrozenSet_CheckExact(so)) { | |
| return Py_NewRef(so); | |
| } | |
| return set_copy_impl(so); | |
| } | |
| /*[clinic input] | |
| @critical_section | |
| set.clear | |
| so: setobject | |
| Remove all elements from this set. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| set_clear_impl(PySetObject *so) | |
| /*[clinic end generated code: output=4e71d5a83904161a input=c6f831b366111950]*/ | |
| { | |
| set_clear_internal((PyObject*)so); | |
| Py_RETURN_NONE; | |
| } | |
| /*[clinic input] | |
| set.union | |
| so: setobject | |
| *others: array | |
| Return a new set with elements from the set and all others. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| set_union_impl(PySetObject *so, PyObject * const *others, | |
| Py_ssize_t others_length) | |
| /*[clinic end generated code: output=b1bfa3d74065f27e input=55a2e81db6347a4f]*/ | |
| { | |
| PySetObject *result; | |
| PyObject *other; | |
| Py_ssize_t i; | |
| result = (PySetObject *)make_new_set_basetype_untracked(Py_TYPE(so), | |
| (PyObject *)so); | |
| if (result == NULL) | |
| return NULL; | |
| for (i = 0; i < others_length; i++) { | |
| other = others[i]; | |
| if ((PyObject *)so == other) | |
| continue; | |
| if (set_update_local(result, other)) { | |
| Py_DECREF(result); | |
| return NULL; | |
| } | |
| } | |
| _PyObject_GC_TRACK(result); | |
| return (PyObject *)result; | |
| } | |
| static PyObject * | |
| set_or(PyObject *self, PyObject *other) | |
| { | |
| PySetObject *result; | |
| if (!PyAnySet_Check(self) || !PyAnySet_Check(other)) | |
| Py_RETURN_NOTIMPLEMENTED; | |
| result = (PySetObject *)set_copy(self, NULL); | |
| if (result == NULL) { | |
| return NULL; | |
| } | |
| if (Py_Is(self, other)) { | |
| return (PyObject *)result; | |
| } | |
| if (set_update_local(result, other)) { | |
| Py_DECREF(result); | |
| return NULL; | |
| } | |
| return (PyObject *)result; | |
| } | |
| static PyObject * | |
| set_ior(PyObject *self, PyObject *other) | |
| { | |
| if (!PyAnySet_Check(other)) | |
| Py_RETURN_NOTIMPLEMENTED; | |
| PySetObject *so = _PySet_CAST(self); | |
| if (set_update_internal(so, other)) { | |
| return NULL; | |
| } | |
| return Py_NewRef(so); | |
| } | |
| static PyObject * | |
| set_intersection(PySetObject *so, PyObject *other) | |
| { | |
| PySetObject *result; | |
| PyObject *key, *it, *tmp; | |
| Py_hash_t hash; | |
| int rv; | |
| if ((PyObject *)so == other) | |
| return set_copy_impl(so); | |
| result = (PySetObject *)make_new_set_basetype_untracked(Py_TYPE(so), NULL); | |
| if (result == NULL) | |
| return NULL; | |
| if (PyAnySet_Check(other)) { | |
| Py_ssize_t pos = 0; | |
| setentry *entry; | |
| if (PySet_GET_SIZE(other) > PySet_GET_SIZE(so)) { | |
| tmp = (PyObject *)so; | |
| so = (PySetObject *)other; | |
| other = tmp; | |
| } | |
| while (set_next((PySetObject *)other, &pos, &entry)) { | |
| key = entry->key; | |
| hash = entry->hash; | |
| Py_INCREF(key); | |
| rv = set_contains_entry(so, key, hash); | |
| if (rv < 0) { | |
| Py_DECREF(result); | |
| Py_DECREF(key); | |
| return NULL; | |
| } | |
| if (rv) { | |
| if (set_add_entry(result, key, hash)) { | |
| Py_DECREF(result); | |
| Py_DECREF(key); | |
| return NULL; | |
| } | |
| } | |
| Py_DECREF(key); | |
| } | |
| _PyObject_GC_TRACK(result); | |
| return (PyObject *)result; | |
| } | |
| it = PyObject_GetIter(other); | |
| if (it == NULL) { | |
| Py_DECREF(result); | |
| return NULL; | |
| } | |
| while ((key = PyIter_Next(it)) != NULL) { | |
| hash = PyObject_Hash(key); | |
| if (hash == -1) | |
| goto error; | |
| rv = set_contains_entry(so, key, hash); | |
| if (rv < 0) | |
| goto error; | |
| if (rv) { | |
| if (set_add_entry(result, key, hash)) | |
| goto error; | |
| if (PySet_GET_SIZE(result) >= PySet_GET_SIZE(so)) { | |
| Py_DECREF(key); | |
| break; | |
| } | |
| } | |
| Py_DECREF(key); | |
| } | |
| Py_DECREF(it); | |
| if (PyErr_Occurred()) { | |
| Py_DECREF(result); | |
| return NULL; | |
| } | |
| _PyObject_GC_TRACK(result); | |
| return (PyObject *)result; | |
| error: | |
| Py_DECREF(it); | |
| Py_DECREF(result); | |
| Py_DECREF(key); | |
| return NULL; | |
| } | |
| /*[clinic input] | |
| set.intersection as set_intersection_multi | |
| so: setobject | |
| *others: array | |
| Return a new set with elements common to the set and all others. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| set_intersection_multi_impl(PySetObject *so, PyObject * const *others, | |
| Py_ssize_t others_length) | |
| /*[clinic end generated code: output=db9ff9f875132b6b input=36c7b615694cadae]*/ | |
| { | |
| Py_ssize_t i; | |
| if (others_length == 0) { | |
| return set_copy((PyObject *)so, NULL); | |
| } | |
| PyObject *result = Py_NewRef(so); | |
| for (i = 0; i < others_length; i++) { | |
| PyObject *other = others[i]; | |
| PyObject *newresult; | |
| Py_BEGIN_CRITICAL_SECTION2(result, other); | |
| newresult = set_intersection((PySetObject *)result, other); | |
| Py_END_CRITICAL_SECTION2(); | |
| if (newresult == NULL) { | |
| Py_DECREF(result); | |
| return NULL; | |
| } | |
| Py_SETREF(result, newresult); | |
| } | |
| return result; | |
| } | |
| static PyObject * | |
| set_intersection_update(PySetObject *so, PyObject *other) | |
| { | |
| PyObject *tmp; | |
| tmp = set_intersection(so, other); | |
| if (tmp == NULL) | |
| return NULL; | |
| set_swap_bodies(so, (PySetObject *)tmp); | |
| Py_DECREF(tmp); | |
| Py_RETURN_NONE; | |
| } | |
| /*[clinic input] | |
| set.intersection_update as set_intersection_update_multi | |
| so: setobject | |
| *others: array | |
| Update the set, keeping only elements found in it and all others. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| set_intersection_update_multi_impl(PySetObject *so, PyObject * const *others, | |
| Py_ssize_t others_length) | |
| /*[clinic end generated code: output=d768b5584675b48d input=782e422fc370e4fc]*/ | |
| { | |
| PyObject *tmp; | |
| tmp = set_intersection_multi_impl(so, others, others_length); | |
| if (tmp == NULL) | |
| return NULL; | |
| Py_BEGIN_CRITICAL_SECTION(so); | |
| set_swap_bodies(so, (PySetObject *)tmp); | |
| Py_END_CRITICAL_SECTION(); | |
| Py_DECREF(tmp); | |
| Py_RETURN_NONE; | |
| } | |
| static PyObject * | |
| set_and(PyObject *self, PyObject *other) | |
| { | |
| if (!PyAnySet_Check(self) || !PyAnySet_Check(other)) | |
| Py_RETURN_NOTIMPLEMENTED; | |
| PySetObject *so = _PySet_CAST(self); | |
| PyObject *rv; | |
| Py_BEGIN_CRITICAL_SECTION2(so, other); | |
| rv = set_intersection(so, other); | |
| Py_END_CRITICAL_SECTION2(); | |
| return rv; | |
| } | |
| static PyObject * | |
| set_iand(PyObject *self, PyObject *other) | |
| { | |
| PyObject *result; | |
| if (!PyAnySet_Check(other)) | |
| Py_RETURN_NOTIMPLEMENTED; | |
| PySetObject *so = _PySet_CAST(self); | |
| Py_BEGIN_CRITICAL_SECTION2(so, other); | |
| result = set_intersection_update(so, other); | |
| Py_END_CRITICAL_SECTION2(); | |
| if (result == NULL) | |
| return NULL; | |
| Py_DECREF(result); | |
| return Py_NewRef(so); | |
| } | |
| /*[clinic input] | |
| @critical_section so other | |
| set.isdisjoint | |
| so: setobject | |
| other: object | |
| / | |
| Return True if two sets have a null intersection. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| set_isdisjoint_impl(PySetObject *so, PyObject *other) | |
| /*[clinic end generated code: output=273493f2d57c565e input=32f8dcab5e0fc7d6]*/ | |
| { | |
| PyObject *key, *it, *tmp; | |
| int rv; | |
| if ((PyObject *)so == other) { | |
| if (PySet_GET_SIZE(so) == 0) | |
| Py_RETURN_TRUE; | |
| else | |
| Py_RETURN_FALSE; | |
| } | |
| if (PyAnySet_CheckExact(other)) { | |
| Py_ssize_t pos = 0; | |
| setentry *entry; | |
| if (PySet_GET_SIZE(other) > PySet_GET_SIZE(so)) { | |
| tmp = (PyObject *)so; | |
| so = (PySetObject *)other; | |
| other = tmp; | |
| } | |
| while (set_next((PySetObject *)other, &pos, &entry)) { | |
| PyObject *key = entry->key; | |
| Py_INCREF(key); | |
| rv = set_contains_entry(so, key, entry->hash); | |
| Py_DECREF(key); | |
| if (rv < 0) { | |
| return NULL; | |
| } | |
| if (rv) { | |
| Py_RETURN_FALSE; | |
| } | |
| } | |
| Py_RETURN_TRUE; | |
| } | |
| it = PyObject_GetIter(other); | |
| if (it == NULL) | |
| return NULL; | |
| while ((key = PyIter_Next(it)) != NULL) { | |
| rv = set_contains_key(so, key); | |
| Py_DECREF(key); | |
| if (rv < 0) { | |
| Py_DECREF(it); | |
| return NULL; | |
| } | |
| if (rv) { | |
| Py_DECREF(it); | |
| Py_RETURN_FALSE; | |
| } | |
| } | |
| Py_DECREF(it); | |
| if (PyErr_Occurred()) | |
| return NULL; | |
| Py_RETURN_TRUE; | |
| } | |
| static int | |
| set_difference_update_internal(PySetObject *so, PyObject *other) | |
| { | |
| _Py_CRITICAL_SECTION_ASSERT_OBJECT_LOCKED(so); | |
| _Py_CRITICAL_SECTION_ASSERT_OBJECT_LOCKED(other); | |
| if ((PyObject *)so == other) | |
| return set_clear_internal((PyObject*)so); | |
| if (PyAnySet_Check(other)) { | |
| setentry *entry; | |
| Py_ssize_t pos = 0; | |
| /* Optimization: When the other set is more than 8 times | |
| larger than the base set, replace the other set with | |
| intersection of the two sets. | |
| */ | |
| if ((PySet_GET_SIZE(other) >> 3) > PySet_GET_SIZE(so)) { | |
| other = set_intersection(so, other); | |
| if (other == NULL) | |
| return -1; | |
| } else { | |
| Py_INCREF(other); | |
| } | |
| while (set_next((PySetObject *)other, &pos, &entry)) { | |
| PyObject *key = entry->key; | |
| Py_INCREF(key); | |
| if (set_discard_entry(so, key, entry->hash) < 0) { | |
| Py_DECREF(other); | |
| Py_DECREF(key); | |
| return -1; | |
| } | |
| Py_DECREF(key); | |
| } | |
| Py_DECREF(other); | |
| } else { | |
| PyObject *key, *it; | |
| it = PyObject_GetIter(other); | |
| if (it == NULL) | |
| return -1; | |
| while ((key = PyIter_Next(it)) != NULL) { | |
| if (set_discard_key(so, key) < 0) { | |
| Py_DECREF(it); | |
| Py_DECREF(key); | |
| return -1; | |
| } | |
| Py_DECREF(key); | |
| } | |
| Py_DECREF(it); | |
| if (PyErr_Occurred()) | |
| return -1; | |
| } | |
| /* If more than 1/4th are dummies, then resize them away. */ | |
| if ((size_t)(so->fill - so->used) <= (size_t)so->mask / 4) | |
| return 0; | |
| return set_table_resize(so, so->used>50000 ? so->used*2 : so->used*4); | |
| } | |
| /*[clinic input] | |
| set.difference_update | |
| so: setobject | |
| *others: array | |
| Update the set, removing elements found in others. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| set_difference_update_impl(PySetObject *so, PyObject * const *others, | |
| Py_ssize_t others_length) | |
| /*[clinic end generated code: output=04a22179b322cfe6 input=93ac28ba5b233696]*/ | |
| { | |
| Py_ssize_t i; | |
| for (i = 0; i < others_length; i++) { | |
| PyObject *other = others[i]; | |
| int rv; | |
| Py_BEGIN_CRITICAL_SECTION2(so, other); | |
| rv = set_difference_update_internal(so, other); | |
| Py_END_CRITICAL_SECTION2(); | |
| if (rv) { | |
| return NULL; | |
| } | |
| } | |
| Py_RETURN_NONE; | |
| } | |
| static PyObject * | |
| set_copy_and_difference_untracked(PySetObject *so, PyObject *other) | |
| { | |
| PyObject *result; | |
| result = set_copy_untracked_lock_held(so); | |
| if (result == NULL) | |
| return NULL; | |
| if (set_difference_update_internal((PySetObject *) result, other) == 0) | |
| return result; | |
| Py_DECREF(result); | |
| return NULL; | |
| } | |
| static PyObject * | |
| set_difference_untracked(PySetObject *so, PyObject *other) | |
| { | |
| PyObject *result; | |
| PyObject *key; | |
| Py_hash_t hash; | |
| setentry *entry; | |
| Py_ssize_t pos = 0, other_size; | |
| int rv; | |
| if (PyAnySet_Check(other)) { | |
| other_size = PySet_GET_SIZE(other); | |
| } | |
| else if (PyAnyDict_CheckExact(other)) { | |
| other_size = PyDict_GET_SIZE(other); | |
| } | |
| else { | |
| return set_copy_and_difference_untracked(so, other); | |
| } | |
| /* If len(so) much more than len(other), it's more efficient to simply copy | |
| * so and then iterate other looking for common elements. */ | |
| if ((PySet_GET_SIZE(so) >> 2) > other_size) { | |
| return set_copy_and_difference_untracked(so, other); | |
| } | |
| result = make_new_set_basetype_untracked(Py_TYPE(so), NULL); | |
| if (result == NULL) | |
| return NULL; | |
| if (PyAnyDict_CheckExact(other)) { | |
| while (set_next(so, &pos, &entry)) { | |
| key = entry->key; | |
| hash = entry->hash; | |
| Py_INCREF(key); | |
| rv = _PyDict_Contains_KnownHash(other, key, hash); | |
| if (rv < 0) { | |
| Py_DECREF(result); | |
| Py_DECREF(key); | |
| return NULL; | |
| } | |
| if (!rv) { | |
| if (set_add_entry((PySetObject *)result, key, hash)) { | |
| Py_DECREF(result); | |
| Py_DECREF(key); | |
| return NULL; | |
| } | |
| } | |
| Py_DECREF(key); | |
| } | |
| return result; | |
| } | |
| /* Iterate over so, checking for common elements in other. */ | |
| while (set_next(so, &pos, &entry)) { | |
| key = entry->key; | |
| hash = entry->hash; | |
| Py_INCREF(key); | |
| rv = set_contains_entry((PySetObject *)other, key, hash); | |
| if (rv < 0) { | |
| Py_DECREF(result); | |
| Py_DECREF(key); | |
| return NULL; | |
| } | |
| if (!rv) { | |
| if (set_add_entry((PySetObject *)result, key, hash)) { | |
| Py_DECREF(result); | |
| Py_DECREF(key); | |
| return NULL; | |
| } | |
| } | |
| Py_DECREF(key); | |
| } | |
| return result; | |
| } | |
| /*[clinic input] | |
| @permit_long_summary | |
| set.difference as set_difference_multi | |
| so: setobject | |
| *others: array | |
| Return a new set with elements in the set that are not in the others. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| set_difference_multi_impl(PySetObject *so, PyObject * const *others, | |
| Py_ssize_t others_length) | |
| /*[clinic end generated code: output=b0d33fb05d5477a7 input=e0fbedbf79d91d4e]*/ | |
| { | |
| Py_ssize_t i; | |
| PyObject *result, *other; | |
| if (others_length == 0) { | |
| return set_copy((PyObject *)so, NULL); | |
| } | |
| other = others[0]; | |
| Py_BEGIN_CRITICAL_SECTION2(so, other); | |
| result = set_difference_untracked(so, other); | |
| Py_END_CRITICAL_SECTION2(); | |
| if (result == NULL) | |
| return NULL; | |
| for (i = 1; i < others_length; i++) { | |
| other = others[i]; | |
| int rv; | |
| Py_BEGIN_CRITICAL_SECTION(other); | |
| rv = set_difference_update_internal((PySetObject *)result, other); | |
| Py_END_CRITICAL_SECTION(); | |
| if (rv) { | |
| Py_DECREF(result); | |
| return NULL; | |
| } | |
| } | |
| _PyObject_GC_TRACK(result); | |
| return result; | |
| } | |
| static PyObject * | |
| set_sub(PyObject *self, PyObject *other) | |
| { | |
| if (!PyAnySet_Check(self) || !PyAnySet_Check(other)) | |
| Py_RETURN_NOTIMPLEMENTED; | |
| PySetObject *so = _PySet_CAST(self); | |
| PyObject *rv; | |
| Py_BEGIN_CRITICAL_SECTION2(so, other); | |
| rv = set_difference_untracked(so, other); | |
| Py_END_CRITICAL_SECTION2(); | |
| if (rv != NULL) { | |
| _PyObject_GC_TRACK(rv); | |
| } | |
| return rv; | |
| } | |
| static PyObject * | |
| set_isub(PyObject *self, PyObject *other) | |
| { | |
| if (!PyAnySet_Check(other)) | |
| Py_RETURN_NOTIMPLEMENTED; | |
| PySetObject *so = _PySet_CAST(self); | |
| int rv; | |
| Py_BEGIN_CRITICAL_SECTION2(so, other); | |
| rv = set_difference_update_internal(so, other); | |
| Py_END_CRITICAL_SECTION2(); | |
| if (rv < 0) { | |
| return NULL; | |
| } | |
| return Py_NewRef(so); | |
| } | |
| static int | |
| set_symmetric_difference_update_dict(PySetObject *so, PyObject *other) | |
| { | |
| _Py_CRITICAL_SECTION_ASSERT_OBJECT_LOCKED(so); | |
| #ifdef Py_DEBUG | |
| if (!PyFrozenDict_CheckExact(other)) { | |
| _Py_CRITICAL_SECTION_ASSERT_OBJECT_LOCKED(other); | |
| } | |
| #endif | |
| Py_ssize_t pos = 0; | |
| PyObject *key, *value; | |
| Py_hash_t hash; | |
| while (_PyDict_Next(other, &pos, &key, &value, &hash)) { | |
| Py_INCREF(key); | |
| int rv = set_discard_entry(so, key, hash); | |
| if (rv < 0) { | |
| Py_DECREF(key); | |
| return -1; | |
| } | |
| if (rv == DISCARD_NOTFOUND) { | |
| if (set_add_entry(so, key, hash)) { | |
| Py_DECREF(key); | |
| return -1; | |
| } | |
| } | |
| Py_DECREF(key); | |
| } | |
| return 0; | |
| } | |
| static int | |
| set_symmetric_difference_update_set(PySetObject *so, PySetObject *other) | |
| { | |
| _Py_CRITICAL_SECTION_ASSERT_OBJECT_LOCKED(so); | |
| _Py_CRITICAL_SECTION_ASSERT_OBJECT_LOCKED(other); | |
| Py_ssize_t pos = 0; | |
| setentry *entry; | |
| while (set_next(other, &pos, &entry)) { | |
| PyObject *key = Py_NewRef(entry->key); | |
| Py_hash_t hash = entry->hash; | |
| int rv = set_discard_entry(so, key, hash); | |
| if (rv < 0) { | |
| Py_DECREF(key); | |
| return -1; | |
| } | |
| if (rv == DISCARD_NOTFOUND) { | |
| if (set_add_entry(so, key, hash)) { | |
| Py_DECREF(key); | |
| return -1; | |
| } | |
| } | |
| Py_DECREF(key); | |
| } | |
| return 0; | |
| } | |
| /*[clinic input] | |
| @permit_long_summary | |
| set.symmetric_difference_update | |
| so: setobject | |
| other: object | |
| / | |
| Update the set, keeping only elements found in either set, but not in both. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| set_symmetric_difference_update_impl(PySetObject *so, PyObject *other) | |
| /*[clinic end generated code: output=79f80b4ee5da66c1 input=86a3dddac9bfb15e]*/ | |
| { | |
| if (Py_Is((PyObject *)so, other)) { | |
| return set_clear((PyObject *)so, NULL); | |
| } | |
| int rv; | |
| if (PyDict_CheckExact(other)) { | |
| Py_BEGIN_CRITICAL_SECTION2(so, other); | |
| rv = set_symmetric_difference_update_dict(so, other); | |
| Py_END_CRITICAL_SECTION2(); | |
| } | |
| else if (PyFrozenDict_CheckExact(other)) { | |
| Py_BEGIN_CRITICAL_SECTION(so); | |
| rv = set_symmetric_difference_update_dict(so, other); | |
| Py_END_CRITICAL_SECTION(); | |
| } | |
| else if (PyAnySet_Check(other)) { | |
| Py_BEGIN_CRITICAL_SECTION2(so, other); | |
| rv = set_symmetric_difference_update_set(so, (PySetObject *)other); | |
| Py_END_CRITICAL_SECTION2(); | |
| } | |
| else { | |
| PySetObject *otherset = (PySetObject *)make_new_set_basetype(Py_TYPE(so), other); | |
| if (otherset == NULL) { | |
| return NULL; | |
| } | |
| Py_BEGIN_CRITICAL_SECTION(so); | |
| rv = set_symmetric_difference_update_set(so, otherset); | |
| Py_END_CRITICAL_SECTION(); | |
| Py_DECREF(otherset); | |
| } | |
| if (rv < 0) { | |
| return NULL; | |
| } | |
| Py_RETURN_NONE; | |
| } | |
| /*[clinic input] | |
| @permit_long_summary | |
| @critical_section so other | |
| set.symmetric_difference | |
| so: setobject | |
| other: object | |
| / | |
| Return a new set with elements in either the set or other but not both. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| set_symmetric_difference_impl(PySetObject *so, PyObject *other) | |
| /*[clinic end generated code: output=270ee0b5d42b0797 input=8c29b0be90d47feb]*/ | |
| { | |
| PySetObject *result = | |
| (PySetObject *)make_new_set_basetype_untracked(Py_TYPE(so), NULL); | |
| if (result == NULL) { | |
| return NULL; | |
| } | |
| if (set_update_lock_held(result, other) < 0) { | |
| Py_DECREF(result); | |
| return NULL; | |
| } | |
| if (set_symmetric_difference_update_set(result, so) < 0) { | |
| Py_DECREF(result); | |
| return NULL; | |
| } | |
| _PyObject_GC_TRACK(result); | |
| return (PyObject *)result; | |
| } | |
| static PyObject * | |
| set_xor(PyObject *self, PyObject *other) | |
| { | |
| if (!PyAnySet_Check(self) || !PyAnySet_Check(other)) | |
| Py_RETURN_NOTIMPLEMENTED; | |
| PySetObject *so = _PySet_CAST(self); | |
| return set_symmetric_difference((PyObject*)so, other); | |
| } | |
| static PyObject * | |
| set_ixor(PyObject *self, PyObject *other) | |
| { | |
| PyObject *result; | |
| if (!PyAnySet_Check(other)) | |
| Py_RETURN_NOTIMPLEMENTED; | |
| PySetObject *so = _PySet_CAST(self); | |
| result = set_symmetric_difference_update((PyObject*)so, other); | |
| if (result == NULL) | |
| return NULL; | |
| Py_DECREF(result); | |
| return Py_NewRef(so); | |
| } | |
| /*[clinic input] | |
| @critical_section so other | |
| set.issubset | |
| so: setobject | |
| other: object | |
| / | |
| Report whether another set contains this set. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| set_issubset_impl(PySetObject *so, PyObject *other) | |
| /*[clinic end generated code: output=b2b59d5f314555ce input=f2a4fd0f2537758b]*/ | |
| { | |
| setentry *entry; | |
| Py_ssize_t pos = 0; | |
| int rv; | |
| if (!PyAnySet_Check(other)) { | |
| PyObject *tmp = set_intersection(so, other); | |
| if (tmp == NULL) { | |
| return NULL; | |
| } | |
| int result = (PySet_GET_SIZE(tmp) == PySet_GET_SIZE(so)); | |
| Py_DECREF(tmp); | |
| return PyBool_FromLong(result); | |
| } | |
| if (PySet_GET_SIZE(so) > PySet_GET_SIZE(other)) | |
| Py_RETURN_FALSE; | |
| while (set_next(so, &pos, &entry)) { | |
| PyObject *key = entry->key; | |
| Py_INCREF(key); | |
| rv = set_contains_entry((PySetObject *)other, key, entry->hash); | |
| Py_DECREF(key); | |
| if (rv < 0) { | |
| return NULL; | |
| } | |
| if (!rv) { | |
| Py_RETURN_FALSE; | |
| } | |
| } | |
| Py_RETURN_TRUE; | |
| } | |
| /*[clinic input] | |
| @critical_section so other | |
| set.issuperset | |
| so: setobject | |
| other: object | |
| / | |
| Report whether this set contains another set. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| set_issuperset_impl(PySetObject *so, PyObject *other) | |
| /*[clinic end generated code: output=ecf00ce552c09461 input=5f2e1f262e6e4ccc]*/ | |
| { | |
| if (PyAnySet_Check(other)) { | |
| return set_issubset(other, (PyObject *)so); | |
| } | |
| PyObject *key, *it = PyObject_GetIter(other); | |
| if (it == NULL) { | |
| return NULL; | |
| } | |
| while ((key = PyIter_Next(it)) != NULL) { | |
| int rv = set_contains_key(so, key); | |
| Py_DECREF(key); | |
| if (rv < 0) { | |
| Py_DECREF(it); | |
| return NULL; | |
| } | |
| if (!rv) { | |
| Py_DECREF(it); | |
| Py_RETURN_FALSE; | |
| } | |
| } | |
| Py_DECREF(it); | |
| if (PyErr_Occurred()) { | |
| return NULL; | |
| } | |
| Py_RETURN_TRUE; | |
| } | |
| static PyObject * | |
| set_richcompare(PyObject *self, PyObject *w, int op) | |
| { | |
| PySetObject *v = _PySet_CAST(self); | |
| PyObject *r1; | |
| int r2; | |
| if(!PyAnySet_Check(w)) | |
| Py_RETURN_NOTIMPLEMENTED; | |
| switch (op) { | |
| case Py_EQ: | |
| if (PySet_GET_SIZE(v) != PySet_GET_SIZE(w)) | |
| Py_RETURN_FALSE; | |
| Py_hash_t v_hash = FT_ATOMIC_LOAD_SSIZE_RELAXED(v->hash); | |
| Py_hash_t w_hash = FT_ATOMIC_LOAD_SSIZE_RELAXED(((PySetObject *)w)->hash); | |
| if (v_hash != -1 && w_hash != -1 && v_hash != w_hash) | |
| Py_RETURN_FALSE; | |
| return set_issubset((PyObject*)v, w); | |
| case Py_NE: | |
| r1 = set_richcompare((PyObject*)v, w, Py_EQ); | |
| if (r1 == NULL) | |
| return NULL; | |
| r2 = PyObject_IsTrue(r1); | |
| Py_DECREF(r1); | |
| if (r2 < 0) | |
| return NULL; | |
| return PyBool_FromLong(!r2); | |
| case Py_LE: | |
| return set_issubset((PyObject*)v, w); | |
| case Py_GE: | |
| return set_issuperset((PyObject*)v, w); | |
| case Py_LT: | |
| if (PySet_GET_SIZE(v) >= PySet_GET_SIZE(w)) | |
| Py_RETURN_FALSE; | |
| return set_issubset((PyObject*)v, w); | |
| case Py_GT: | |
| if (PySet_GET_SIZE(v) <= PySet_GET_SIZE(w)) | |
| Py_RETURN_FALSE; | |
| return set_issuperset((PyObject*)v, w); | |
| } | |
| Py_RETURN_NOTIMPLEMENTED; | |
| } | |
| /*[clinic input] | |
| @critical_section | |
| set.add | |
| so: setobject | |
| object as key: object | |
| / | |
| Add an element to a set. | |
| This has no effect if the element is already present. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| set_add_impl(PySetObject *so, PyObject *key) | |
| /*[clinic end generated code: output=4cc4a937f1425c96 input=03baf62cb0e66514]*/ | |
| { | |
| if (set_add_key(so, key)) | |
| return NULL; | |
| Py_RETURN_NONE; | |
| } | |
| int | |
| _PySet_Contains(PySetObject *so, PyObject *key) | |
| { | |
| assert(so); | |
| Py_hash_t hash = PyObject_Hash(key); | |
| if (hash == -1) { | |
| if (!PySet_Check(key) || !PyErr_ExceptionMatches(PyExc_TypeError)) { | |
| set_unhashable_type(key); | |
| return -1; | |
| } | |
| PyErr_Clear(); | |
| // Note that 'key' could be a set() or frozenset() object. Unlike most | |
| // container types, set allows membership testing with a set key, even | |
| // though it is not hashable. | |
| Py_BEGIN_CRITICAL_SECTION(key); | |
| hash = frozenset_hash_impl(key); | |
| Py_END_CRITICAL_SECTION(); | |
| } | |
| return set_contains_entry(so, key, hash); | |
| } | |
| static int | |
| set_contains(PyObject *self, PyObject *key) | |
| { | |
| PySetObject *so = _PySet_CAST(self); | |
| return _PySet_Contains(so, key); | |
| } | |
| /*[clinic input] | |
| @coexist | |
| set.__contains__ | |
| so: setobject | |
| object as key: object | |
| / | |
| x.__contains__(y) <==> y in x. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| set___contains___impl(PySetObject *so, PyObject *key) | |
| /*[clinic end generated code: output=b44863d034b3c70e input=cf4c72db704e4cf0]*/ | |
| { | |
| long result; | |
| result = _PySet_Contains(so, key); | |
| if (result < 0) | |
| return NULL; | |
| return PyBool_FromLong(result); | |
| } | |
| /*[clinic input] | |
| @coexist | |
| frozenset.__contains__ | |
| so: setobject | |
| object as key: object | |
| / | |
| x.__contains__(y) <==> y in x. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| frozenset___contains___impl(PySetObject *so, PyObject *key) | |
| /*[clinic end generated code: output=2301ed91bc3a6dd5 input=2f04922a98d8bab7]*/ | |
| { | |
| Py_hash_t hash = PyObject_Hash(key); | |
| if (hash == -1) { | |
| if (!PySet_Check(key) || !PyErr_ExceptionMatches(PyExc_TypeError)) { | |
| set_unhashable_type(key); | |
| return NULL; | |
| } | |
| PyErr_Clear(); | |
| Py_BEGIN_CRITICAL_SECTION(key); | |
| hash = frozenset_hash_impl(key); | |
| Py_END_CRITICAL_SECTION(); | |
| } | |
| setentry *entry; // unused | |
| int status = set_do_lookup(so, so->table, so->mask, key, hash, &entry, | |
| set_compare_frozenset); | |
| if (status < 0) | |
| return NULL; | |
| return PyBool_FromLong(status); | |
| } | |
| /*[clinic input] | |
| @critical_section | |
| set.remove | |
| so: setobject | |
| object as key: object | |
| / | |
| Remove an element from a set; it must be a member. | |
| If the element is not a member, raise a KeyError. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| set_remove_impl(PySetObject *so, PyObject *key) | |
| /*[clinic end generated code: output=0b9134a2a2200363 input=893e1cb1df98227a]*/ | |
| { | |
| int rv; | |
| rv = set_discard_key(so, key); | |
| if (rv < 0) { | |
| if (!PySet_Check(key) || !PyErr_ExceptionMatches(PyExc_TypeError)) | |
| return NULL; | |
| PyErr_Clear(); | |
| Py_hash_t hash; | |
| Py_BEGIN_CRITICAL_SECTION(key); | |
| hash = frozenset_hash_impl(key); | |
| Py_END_CRITICAL_SECTION(); | |
| rv = set_discard_entry(so, key, hash); | |
| if (rv < 0) | |
| return NULL; | |
| } | |
| if (rv == DISCARD_NOTFOUND) { | |
| _PyErr_SetKeyError(key); | |
| return NULL; | |
| } | |
| Py_RETURN_NONE; | |
| } | |
| /*[clinic input] | |
| @critical_section | |
| set.discard | |
| so: setobject | |
| object as key: object | |
| / | |
| Remove an element from a set if it is a member. | |
| Unlike set.remove(), the discard() method does not raise | |
| an exception when an element is missing from the set. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| set_discard_impl(PySetObject *so, PyObject *key) | |
| /*[clinic end generated code: output=eec3b687bf32759e input=861cb7fb69b4def0]*/ | |
| { | |
| int rv; | |
| rv = set_discard_key(so, key); | |
| if (rv < 0) { | |
| if (!PySet_Check(key) || !PyErr_ExceptionMatches(PyExc_TypeError)) | |
| return NULL; | |
| PyErr_Clear(); | |
| Py_hash_t hash; | |
| Py_BEGIN_CRITICAL_SECTION(key); | |
| hash = frozenset_hash_impl(key); | |
| Py_END_CRITICAL_SECTION(); | |
| rv = set_discard_entry(so, key, hash); | |
| if (rv < 0) | |
| return NULL; | |
| } | |
| Py_RETURN_NONE; | |
| } | |
| /*[clinic input] | |
| @critical_section | |
| set.__reduce__ | |
| so: setobject | |
| Return state information for pickling. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| set___reduce___impl(PySetObject *so) | |
| /*[clinic end generated code: output=9af7d0e029df87ee input=59405a4249e82f71]*/ | |
| { | |
| PyObject *keys=NULL, *args=NULL, *result=NULL, *state=NULL; | |
| keys = PySequence_List((PyObject *)so); | |
| if (keys == NULL) | |
| goto done; | |
| args = PyTuple_Pack(1, keys); | |
| if (args == NULL) | |
| goto done; | |
| state = _PyObject_GetState((PyObject *)so); | |
| if (state == NULL) | |
| goto done; | |
| result = PyTuple_Pack(3, Py_TYPE(so), args, state); | |
| done: | |
| Py_XDECREF(args); | |
| Py_XDECREF(keys); | |
| Py_XDECREF(state); | |
| return result; | |
| } | |
| /*[clinic input] | |
| @critical_section | |
| set.__sizeof__ | |
| so: setobject | |
| S.__sizeof__() -> size of S in memory, in bytes. | |
| [clinic start generated code]*/ | |
| static PyObject * | |
| set___sizeof___impl(PySetObject *so) | |
| /*[clinic end generated code: output=4bfa3df7bd38ed88 input=09e1a09f168eaa23]*/ | |
| { | |
| size_t res = _PyObject_SIZE(Py_TYPE(so)); | |
| if (so->table != so->smalltable) { | |
| res += ((size_t)so->mask + 1) * sizeof(setentry); | |
| } | |
| return PyLong_FromSize_t(res); | |
| } | |
| static int | |
| set_init(PyObject *so, PyObject *args, PyObject *kwds) | |
| { | |
| PySetObject *self = _PySet_CAST(so); | |
| PyObject *iterable = NULL; | |
| if (!_PyArg_NoKeywords("set", kwds)) | |
| return -1; | |
| if (!PyArg_UnpackTuple(args, Py_TYPE(self)->tp_name, 0, 1, &iterable)) | |
| return -1; | |
| if (_PyObject_IsUniquelyReferenced((PyObject *)self) && self->fill == 0) { | |
| self->hash = -1; | |
| if (iterable == NULL) { | |
| return 0; | |
| } | |
| return set_update_local(self, iterable); | |
| } | |
| Py_BEGIN_CRITICAL_SECTION(self); | |
| if (self->fill) | |
| set_clear_internal((PyObject*)self); | |
| self->hash = -1; | |
| Py_END_CRITICAL_SECTION(); | |
| if (iterable == NULL) | |
| return 0; | |
| return set_update_internal(self, iterable); | |
| } | |
| static PyObject* | |
| set_vectorcall(PyObject *type, PyObject * const*args, | |
| size_t nargsf, PyObject *kwnames) | |
| { | |
| assert(PyType_Check(type)); | |
| if (!_PyArg_NoKwnames("set", kwnames)) { | |
| return NULL; | |
| } | |
| Py_ssize_t nargs = PyVectorcall_NARGS(nargsf); | |
| if (!_PyArg_CheckPositional("set", nargs, 0, 1)) { | |
| return NULL; | |
| } | |
| if (nargs) { | |
| return make_new_set(_PyType_CAST(type), args[0]); | |
| } | |
| return make_new_set(_PyType_CAST(type), NULL); | |
| } | |
| static PySequenceMethods set_as_sequence = { | |
| set_len, /* sq_length */ | |
| 0, /* sq_concat */ | |
| 0, /* sq_repeat */ | |
| 0, /* sq_item */ | |
| 0, /* sq_slice */ | |
| 0, /* sq_ass_item */ | |
| 0, /* sq_ass_slice */ | |
| set_contains, /* sq_contains */ | |
| }; | |
| /* set object ********************************************************/ | |
| static PyMethodDef set_methods[] = { | |
| SET_ADD_METHODDEF | |
| SET_CLEAR_METHODDEF | |
| SET___CONTAINS___METHODDEF | |
| SET_COPY_METHODDEF | |
| SET_DISCARD_METHODDEF | |
| SET_DIFFERENCE_MULTI_METHODDEF | |
| SET_DIFFERENCE_UPDATE_METHODDEF | |
| SET_INTERSECTION_MULTI_METHODDEF | |
| SET_INTERSECTION_UPDATE_MULTI_METHODDEF | |
| SET_ISDISJOINT_METHODDEF | |
| SET_ISSUBSET_METHODDEF | |
| SET_ISSUPERSET_METHODDEF | |
| SET_POP_METHODDEF | |
| SET___REDUCE___METHODDEF | |
| SET_REMOVE_METHODDEF | |
| SET___SIZEOF___METHODDEF | |
| SET_SYMMETRIC_DIFFERENCE_METHODDEF | |
| SET_SYMMETRIC_DIFFERENCE_UPDATE_METHODDEF | |
| SET_UNION_METHODDEF | |
| SET_UPDATE_METHODDEF | |
| {"__class_getitem__", Py_GenericAlias, METH_O|METH_CLASS, | |
| PyDoc_STR("sets are generic over the type of their elements")}, | |
| {NULL, NULL} /* sentinel */ | |
| }; | |
| static PyNumberMethods set_as_number = { | |
| 0, /*nb_add*/ | |
| set_sub, /*nb_subtract*/ | |
| 0, /*nb_multiply*/ | |
| 0, /*nb_remainder*/ | |
| 0, /*nb_divmod*/ | |
| 0, /*nb_power*/ | |
| 0, /*nb_negative*/ | |
| 0, /*nb_positive*/ | |
| 0, /*nb_absolute*/ | |
| 0, /*nb_bool*/ | |
| 0, /*nb_invert*/ | |
| 0, /*nb_lshift*/ | |
| 0, /*nb_rshift*/ | |
| set_and, /*nb_and*/ | |
| set_xor, /*nb_xor*/ | |
| set_or, /*nb_or*/ | |
| 0, /*nb_int*/ | |
| 0, /*nb_reserved*/ | |
| 0, /*nb_float*/ | |
| 0, /*nb_inplace_add*/ | |
| set_isub, /*nb_inplace_subtract*/ | |
| 0, /*nb_inplace_multiply*/ | |
| 0, /*nb_inplace_remainder*/ | |
| 0, /*nb_inplace_power*/ | |
| 0, /*nb_inplace_lshift*/ | |
| 0, /*nb_inplace_rshift*/ | |
| set_iand, /*nb_inplace_and*/ | |
| set_ixor, /*nb_inplace_xor*/ | |
| set_ior, /*nb_inplace_or*/ | |
| }; | |
| PyDoc_STRVAR(set_doc, | |
| "set(iterable=(), /)\n\ | |
| --\n\ | |
| \n\ | |
| Build an unordered collection of unique elements."); | |
| PyTypeObject PySet_Type = { | |
| PyVarObject_HEAD_INIT(&PyType_Type, 0) | |
| "set", /* tp_name */ | |
| sizeof(PySetObject), /* tp_basicsize */ | |
| 0, /* tp_itemsize */ | |
| /* methods */ | |
| set_dealloc, /* tp_dealloc */ | |
| 0, /* tp_vectorcall_offset */ | |
| 0, /* tp_getattr */ | |
| 0, /* tp_setattr */ | |
| 0, /* tp_as_async */ | |
| set_repr, /* tp_repr */ | |
| &set_as_number, /* tp_as_number */ | |
| &set_as_sequence, /* tp_as_sequence */ | |
| 0, /* tp_as_mapping */ | |
| PyObject_HashNotImplemented, /* tp_hash */ | |
| 0, /* tp_call */ | |
| 0, /* tp_str */ | |
| PyObject_GenericGetAttr, /* tp_getattro */ | |
| 0, /* tp_setattro */ | |
| 0, /* tp_as_buffer */ | |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_HAVE_GC | | |
| Py_TPFLAGS_BASETYPE | | |
| _Py_TPFLAGS_MATCH_SELF, /* tp_flags */ | |
| set_doc, /* tp_doc */ | |
| set_traverse, /* tp_traverse */ | |
| set_clear_internal, /* tp_clear */ | |
| set_richcompare, /* tp_richcompare */ | |
| offsetof(PySetObject, weakreflist), /* tp_weaklistoffset */ | |
| set_iter, /* tp_iter */ | |
| 0, /* tp_iternext */ | |
| set_methods, /* tp_methods */ | |
| 0, /* tp_members */ | |
| 0, /* tp_getset */ | |
| 0, /* tp_base */ | |
| 0, /* tp_dict */ | |
| 0, /* tp_descr_get */ | |
| 0, /* tp_descr_set */ | |
| 0, /* tp_dictoffset */ | |
| set_init, /* tp_init */ | |
| _PyType_AllocNoTrack, /* tp_alloc */ | |
| set_new, /* tp_new */ | |
| PyObject_GC_Del, /* tp_free */ | |
| .tp_vectorcall = set_vectorcall, | |
| .tp_version_tag = _Py_TYPE_VERSION_SET, | |
| }; | |
| /* frozenset object ********************************************************/ | |
| static PyMethodDef frozenset_methods[] = { | |
| FROZENSET___CONTAINS___METHODDEF | |
| FROZENSET_COPY_METHODDEF | |
| SET_DIFFERENCE_MULTI_METHODDEF | |
| SET_INTERSECTION_MULTI_METHODDEF | |
| SET_ISDISJOINT_METHODDEF | |
| SET_ISSUBSET_METHODDEF | |
| SET_ISSUPERSET_METHODDEF | |
| SET___REDUCE___METHODDEF | |
| SET___SIZEOF___METHODDEF | |
| SET_SYMMETRIC_DIFFERENCE_METHODDEF | |
| SET_UNION_METHODDEF | |
| {"__class_getitem__", Py_GenericAlias, METH_O|METH_CLASS, | |
| PyDoc_STR("frozensets are generic over the type of their elements")}, | |
| {NULL, NULL} /* sentinel */ | |
| }; | |
| static PyNumberMethods frozenset_as_number = { | |
| 0, /*nb_add*/ | |
| set_sub, /*nb_subtract*/ | |
| 0, /*nb_multiply*/ | |
| 0, /*nb_remainder*/ | |
| 0, /*nb_divmod*/ | |
| 0, /*nb_power*/ | |
| 0, /*nb_negative*/ | |
| 0, /*nb_positive*/ | |
| 0, /*nb_absolute*/ | |
| 0, /*nb_bool*/ | |
| 0, /*nb_invert*/ | |
| 0, /*nb_lshift*/ | |
| 0, /*nb_rshift*/ | |
| set_and, /*nb_and*/ | |
| set_xor, /*nb_xor*/ | |
| set_or, /*nb_or*/ | |
| }; | |
| PyDoc_STRVAR(frozenset_doc, | |
| "frozenset(iterable=(), /)\n\ | |
| --\n\ | |
| \n\ | |
| Build an immutable unordered collection of unique elements."); | |
| PyTypeObject PyFrozenSet_Type = { | |
| PyVarObject_HEAD_INIT(&PyType_Type, 0) | |
| "frozenset", /* tp_name */ | |
| sizeof(PySetObject), /* tp_basicsize */ | |
| 0, /* tp_itemsize */ | |
| /* methods */ | |
| set_dealloc, /* tp_dealloc */ | |
| 0, /* tp_vectorcall_offset */ | |
| 0, /* tp_getattr */ | |
| 0, /* tp_setattr */ | |
| 0, /* tp_as_async */ | |
| set_repr, /* tp_repr */ | |
| &frozenset_as_number, /* tp_as_number */ | |
| &set_as_sequence, /* tp_as_sequence */ | |
| 0, /* tp_as_mapping */ | |
| frozenset_hash, /* tp_hash */ | |
| 0, /* tp_call */ | |
| 0, /* tp_str */ | |
| PyObject_GenericGetAttr, /* tp_getattro */ | |
| 0, /* tp_setattro */ | |
| 0, /* tp_as_buffer */ | |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_HAVE_GC | | |
| Py_TPFLAGS_BASETYPE | | |
| _Py_TPFLAGS_MATCH_SELF, /* tp_flags */ | |
| frozenset_doc, /* tp_doc */ | |
| set_traverse, /* tp_traverse */ | |
| set_clear_internal, /* tp_clear */ | |
| set_richcompare, /* tp_richcompare */ | |
| offsetof(PySetObject, weakreflist), /* tp_weaklistoffset */ | |
| set_iter, /* tp_iter */ | |
| 0, /* tp_iternext */ | |
| frozenset_methods, /* tp_methods */ | |
| 0, /* tp_members */ | |
| 0, /* tp_getset */ | |
| 0, /* tp_base */ | |
| 0, /* tp_dict */ | |
| 0, /* tp_descr_get */ | |
| 0, /* tp_descr_set */ | |
| 0, /* tp_dictoffset */ | |
| 0, /* tp_init */ | |
| _PyType_AllocNoTrack, /* tp_alloc */ | |
| frozenset_new, /* tp_new */ | |
| PyObject_GC_Del, /* tp_free */ | |
| .tp_vectorcall = frozenset_vectorcall, | |
| .tp_version_tag = _Py_TYPE_VERSION_FROZEN_SET, | |
| }; | |
| /***** C API functions *************************************************/ | |
| PyObject * | |
| PySet_New(PyObject *iterable) | |
| { | |
| return make_new_set(&PySet_Type, iterable); | |
| } | |
| PyObject * | |
| PyFrozenSet_New(PyObject *iterable) | |
| { | |
| PyObject *result = make_new_set(&PyFrozenSet_Type, iterable); | |
| if (result != NULL) { | |
| _PyFrozenSet_MaybeUntrack(result); | |
| } | |
| return result; | |
| } | |
| Py_ssize_t | |
| PySet_Size(PyObject *anyset) | |
| { | |
| if (!PyAnySet_Check(anyset)) { | |
| PyErr_BadInternalCall(); | |
| return -1; | |
| } | |
| return set_len(anyset); | |
| } | |
| int | |
| PySet_Clear(PyObject *set) | |
| { | |
| if (!PySet_Check(set)) { | |
| PyErr_BadInternalCall(); | |
| return -1; | |
| } | |
| (void)set_clear(set, NULL); | |
| return 0; | |
| } | |
| void | |
| _PySet_ClearInternal(PySetObject *so) | |
| { | |
| (void)set_clear_internal((PyObject*)so); | |
| } | |
| int | |
| PySet_Contains(PyObject *anyset, PyObject *key) | |
| { | |
| if (!PyAnySet_Check(anyset)) { | |
| PyErr_BadInternalCall(); | |
| return -1; | |
| } | |
| PySetObject *so = (PySetObject *)anyset; | |
| Py_hash_t hash = PyObject_Hash(key); | |
| if (hash == -1) { | |
| set_unhashable_type(key); | |
| return -1; | |
| } | |
| return set_contains_entry(so, key, hash); | |
| } | |
| int | |
| PySet_Discard(PyObject *set, PyObject *key) | |
| { | |
| if (!PySet_Check(set)) { | |
| PyErr_BadInternalCall(); | |
| return -1; | |
| } | |
| int rv; | |
| Py_BEGIN_CRITICAL_SECTION(set); | |
| rv = set_discard_key((PySetObject *)set, key); | |
| Py_END_CRITICAL_SECTION(); | |
| return rv; | |
| } | |
| int | |
| PySet_Add(PyObject *anyset, PyObject *key) | |
| { | |
| if (PySet_Check(anyset)) { | |
| int rv; | |
| Py_BEGIN_CRITICAL_SECTION(anyset); | |
| rv = set_add_key((PySetObject *)anyset, key); | |
| Py_END_CRITICAL_SECTION(); | |
| return rv; | |
| } | |
| if (PyFrozenSet_Check(anyset) && _PyObject_IsUniquelyReferenced(anyset)) { | |
| // We can only change frozensets if they are uniquely referenced. The | |
| // API limits the usage of `PySet_Add` to "fill in the values of brand | |
| // new frozensets before they are exposed to other code". In this case, | |
| // this can be done without a lock. | |
| // Since another key is added to the set, we must track the frozenset | |
| // if needed. | |
| if (PyFrozenSet_CheckExact(anyset) && !PyObject_GC_IsTracked(anyset) && PyObject_GC_IsTracked(key)) { | |
| _PyObject_GC_TRACK(anyset); | |
| } | |
| return set_add_key((PySetObject *)anyset, key); | |
| } | |
| PyErr_BadInternalCall(); | |
| return -1; | |
| } | |
| int | |
| _PySet_NextEntry(PyObject *set, Py_ssize_t *pos, PyObject **key, Py_hash_t *hash) | |
| { | |
| setentry *entry; | |
| if (!PyAnySet_Check(set)) { | |
| PyErr_BadInternalCall(); | |
| return -1; | |
| } | |
| if (set_next((PySetObject *)set, pos, &entry) == 0) | |
| return 0; | |
| *key = entry->key; | |
| *hash = entry->hash; | |
| return 1; | |
| } | |
| int | |
| _PySet_NextEntryRef(PyObject *set, Py_ssize_t *pos, PyObject **key, Py_hash_t *hash) | |
| { | |
| setentry *entry; | |
| if (!PyAnySet_Check(set)) { | |
| PyErr_BadInternalCall(); | |
| return -1; | |
| } | |
| _Py_CRITICAL_SECTION_ASSERT_OBJECT_LOCKED(set); | |
| if (set_next((PySetObject *)set, pos, &entry) == 0) | |
| return 0; | |
| *key = Py_NewRef(entry->key); | |
| *hash = entry->hash; | |
| return 1; | |
| } | |
| PyObject * | |
| PySet_Pop(PyObject *set) | |
| { | |
| if (!PySet_Check(set)) { | |
| PyErr_BadInternalCall(); | |
| return NULL; | |
| } | |
| return set_pop(set, NULL); | |
| } | |
| int | |
| _PySet_Update(PyObject *set, PyObject *iterable) | |
| { | |
| if (!PySet_Check(set)) { | |
| PyErr_BadInternalCall(); | |
| return -1; | |
| } | |
| return set_update_internal((PySetObject *)set, iterable); | |
| } | |
| /* Exported for the gdb plugin's benefit. */ | |
| PyObject *_PySet_Dummy = dummy; | |
| /***** Dummy Struct *************************************************/ | |
| static PyObject * | |
| dummy_repr(PyObject *op) | |
| { | |
| return PyUnicode_FromString("<dummy key>"); | |
| } | |
| static void _Py_NO_RETURN | |
| dummy_dealloc(PyObject* ignore) | |
| { | |
| Py_FatalError("deallocating <dummy key>"); | |
| } | |
| static PyTypeObject _PySetDummy_Type = { | |
| PyVarObject_HEAD_INIT(&PyType_Type, 0) | |
| "<dummy key> type", | |
| 0, | |
| 0, | |
| dummy_dealloc, /*tp_dealloc*/ /*never called*/ | |
| 0, /*tp_vectorcall_offset*/ | |
| 0, /*tp_getattr*/ | |
| 0, /*tp_setattr*/ | |
| 0, /*tp_as_async*/ | |
| dummy_repr, /*tp_repr*/ | |
| 0, /*tp_as_number*/ | |
| 0, /*tp_as_sequence*/ | |
| 0, /*tp_as_mapping*/ | |
| 0, /*tp_hash */ | |
| 0, /*tp_call */ | |
| 0, /*tp_str */ | |
| 0, /*tp_getattro */ | |
| 0, /*tp_setattro */ | |
| 0, /*tp_as_buffer */ | |
| Py_TPFLAGS_DEFAULT, /*tp_flags */ | |
| }; | |
| static PyObject _dummy_struct = _PyObject_HEAD_INIT(&_PySetDummy_Type); |