| |
| /* Tokenizer implementation */ |
| |
| #define PY_SSIZE_T_CLEAN |
| #include "Python.h" |
| #include "pycore_call.h" // _PyObject_CallNoArgs() |
| |
| #include <ctype.h> |
| #include <assert.h> |
| |
| #include "tokenizer.h" |
| #include "errcode.h" |
| |
| /* Alternate tab spacing */ |
| #define ALTTABSIZE 1 |
| |
| #define is_potential_identifier_start(c) (\ |
| (c >= 'a' && c <= 'z')\ |
| || (c >= 'A' && c <= 'Z')\ |
| || c == '_'\ |
| || (c >= 128)) |
| |
| #define is_potential_identifier_char(c) (\ |
| (c >= 'a' && c <= 'z')\ |
| || (c >= 'A' && c <= 'Z')\ |
| || (c >= '0' && c <= '9')\ |
| || c == '_'\ |
| || (c >= 128)) |
| |
| |
| /* Don't ever change this -- it would break the portability of Python code */ |
| #define TABSIZE 8 |
| |
| #define MAKE_TOKEN(token_type) token_setup(tok, token, token_type, p_start, p_end) |
| #define MAKE_TYPE_COMMENT_TOKEN(token_type, col_offset, end_col_offset) (\ |
| type_comment_token_setup(tok, token, token_type, col_offset, end_col_offset, p_start, p_end)) |
| #define ADVANCE_LINENO() \ |
| tok->lineno++; \ |
| tok->col_offset = 0; |
| |
| #define INSIDE_FSTRING(tok) (tok->tok_mode_stack_index > 0) |
| #define INSIDE_FSTRING_EXPR(tok) (tok->curly_bracket_expr_start_depth >= 0) |
| #ifdef Py_DEBUG |
| static inline tokenizer_mode* TOK_GET_MODE(struct tok_state* tok) { |
| assert(tok->tok_mode_stack_index >= 0); |
| assert(tok->tok_mode_stack_index < MAXFSTRINGLEVEL); |
| return &(tok->tok_mode_stack[tok->tok_mode_stack_index]); |
| } |
| static inline tokenizer_mode* TOK_NEXT_MODE(struct tok_state* tok) { |
| assert(tok->tok_mode_stack_index >= 0); |
| assert(tok->tok_mode_stack_index + 1 < MAXFSTRINGLEVEL); |
| return &(tok->tok_mode_stack[++tok->tok_mode_stack_index]); |
| } |
| #else |
| #define TOK_GET_MODE(tok) (&(tok->tok_mode_stack[tok->tok_mode_stack_index])) |
| #define TOK_NEXT_MODE(tok) (&(tok->tok_mode_stack[++tok->tok_mode_stack_index])) |
| #endif |
| |
| /* Forward */ |
| static struct tok_state *tok_new(void); |
| static int tok_nextc(struct tok_state *tok); |
| static void tok_backup(struct tok_state *tok, int c); |
| static int syntaxerror(struct tok_state *tok, const char *format, ...); |
| |
| /* Spaces in this constant are treated as "zero or more spaces or tabs" when |
| tokenizing. */ |
| static const char* type_comment_prefix = "# type: "; |
| |
| /* Create and initialize a new tok_state structure */ |
| |
| static struct tok_state * |
| tok_new(void) |
| { |
| struct tok_state *tok = (struct tok_state *)PyMem_Malloc( |
| sizeof(struct tok_state)); |
| if (tok == NULL) |
| return NULL; |
| tok->buf = tok->cur = tok->inp = NULL; |
| tok->fp_interactive = 0; |
| tok->interactive_src_start = NULL; |
| tok->interactive_src_end = NULL; |
| tok->start = NULL; |
| tok->end = NULL; |
| tok->done = E_OK; |
| tok->fp = NULL; |
| tok->input = NULL; |
| tok->tabsize = TABSIZE; |
| tok->indent = 0; |
| tok->indstack[0] = 0; |
| tok->atbol = 1; |
| tok->pendin = 0; |
| tok->prompt = tok->nextprompt = NULL; |
| tok->lineno = 0; |
| tok->starting_col_offset = -1; |
| tok->col_offset = -1; |
| tok->level = 0; |
| tok->altindstack[0] = 0; |
| tok->decoding_state = STATE_INIT; |
| tok->decoding_erred = 0; |
| tok->enc = NULL; |
| tok->encoding = NULL; |
| tok->cont_line = 0; |
| tok->filename = NULL; |
| tok->decoding_readline = NULL; |
| tok->decoding_buffer = NULL; |
| tok->type_comments = 0; |
| tok->async_hacks = 0; |
| tok->async_def = 0; |
| tok->async_def_indent = 0; |
| tok->async_def_nl = 0; |
| tok->interactive_underflow = IUNDERFLOW_NORMAL; |
| tok->str = NULL; |
| tok->report_warnings = 1; |
| tok->tok_extra_tokens = 0; |
| tok->comment_newline = 0; |
| tok->tok_mode_stack[0] = (tokenizer_mode){.kind =TOK_REGULAR_MODE, .f_string_quote='\0', .f_string_quote_size = 0, .f_string_debug=0}; |
| tok->tok_mode_stack_index = 0; |
| tok->tok_report_warnings = 1; |
| #ifdef Py_DEBUG |
| tok->debug = _Py_GetConfig()->parser_debug; |
| #endif |
| return tok; |
| } |
| |
| static char * |
| new_string(const char *s, Py_ssize_t len, struct tok_state *tok) |
| { |
| char* result = (char *)PyMem_Malloc(len + 1); |
| if (!result) { |
| tok->done = E_NOMEM; |
| return NULL; |
| } |
| memcpy(result, s, len); |
| result[len] = '\0'; |
| return result; |
| } |
| |
| static char * |
| error_ret(struct tok_state *tok) /* XXX */ |
| { |
| tok->decoding_erred = 1; |
| if (tok->fp != NULL && tok->buf != NULL) /* see _PyTokenizer_Free */ |
| PyMem_Free(tok->buf); |
| tok->buf = tok->cur = tok->inp = NULL; |
| tok->start = NULL; |
| tok->end = NULL; |
| tok->done = E_DECODE; |
| return NULL; /* as if it were EOF */ |
| } |
| |
| |
| static const char * |
| get_normal_name(const char *s) /* for utf-8 and latin-1 */ |
| { |
| char buf[13]; |
| int i; |
| for (i = 0; i < 12; i++) { |
| int c = s[i]; |
| if (c == '\0') |
| break; |
| else if (c == '_') |
| buf[i] = '-'; |
| else |
| buf[i] = tolower(c); |
| } |
| buf[i] = '\0'; |
| if (strcmp(buf, "utf-8") == 0 || |
| strncmp(buf, "utf-8-", 6) == 0) |
| return "utf-8"; |
| else if (strcmp(buf, "latin-1") == 0 || |
| strcmp(buf, "iso-8859-1") == 0 || |
| strcmp(buf, "iso-latin-1") == 0 || |
| strncmp(buf, "latin-1-", 8) == 0 || |
| strncmp(buf, "iso-8859-1-", 11) == 0 || |
| strncmp(buf, "iso-latin-1-", 12) == 0) |
| return "iso-8859-1"; |
| else |
| return s; |
| } |
| |
| /* Return the coding spec in S, or NULL if none is found. */ |
| |
| static int |
| get_coding_spec(const char *s, char **spec, Py_ssize_t size, struct tok_state *tok) |
| { |
| Py_ssize_t i; |
| *spec = NULL; |
| /* Coding spec must be in a comment, and that comment must be |
| * the only statement on the source code line. */ |
| for (i = 0; i < size - 6; i++) { |
| if (s[i] == '#') |
| break; |
| if (s[i] != ' ' && s[i] != '\t' && s[i] != '\014') |
| return 1; |
| } |
| for (; i < size - 6; i++) { /* XXX inefficient search */ |
| const char* t = s + i; |
| if (memcmp(t, "coding", 6) == 0) { |
| const char* begin = NULL; |
| t += 6; |
| if (t[0] != ':' && t[0] != '=') |
| continue; |
| do { |
| t++; |
| } while (t[0] == ' ' || t[0] == '\t'); |
| |
| begin = t; |
| while (Py_ISALNUM(t[0]) || |
| t[0] == '-' || t[0] == '_' || t[0] == '.') |
| t++; |
| |
| if (begin < t) { |
| char* r = new_string(begin, t - begin, tok); |
| const char* q; |
| if (!r) |
| return 0; |
| q = get_normal_name(r); |
| if (r != q) { |
| PyMem_Free(r); |
| r = new_string(q, strlen(q), tok); |
| if (!r) |
| return 0; |
| } |
| *spec = r; |
| break; |
| } |
| } |
| } |
| return 1; |
| } |
| |
| /* Check whether the line contains a coding spec. If it does, |
| invoke the set_readline function for the new encoding. |
| This function receives the tok_state and the new encoding. |
| Return 1 on success, 0 on failure. */ |
| |
| static int |
| check_coding_spec(const char* line, Py_ssize_t size, struct tok_state *tok, |
| int set_readline(struct tok_state *, const char *)) |
| { |
| char *cs; |
| if (tok->cont_line) { |
| /* It's a continuation line, so it can't be a coding spec. */ |
| tok->decoding_state = STATE_NORMAL; |
| return 1; |
| } |
| if (!get_coding_spec(line, &cs, size, tok)) { |
| return 0; |
| } |
| if (!cs) { |
| Py_ssize_t i; |
| for (i = 0; i < size; i++) { |
| if (line[i] == '#' || line[i] == '\n' || line[i] == '\r') |
| break; |
| if (line[i] != ' ' && line[i] != '\t' && line[i] != '\014') { |
| /* Stop checking coding spec after a line containing |
| * anything except a comment. */ |
| tok->decoding_state = STATE_NORMAL; |
| break; |
| } |
| } |
| return 1; |
| } |
| tok->decoding_state = STATE_NORMAL; |
| if (tok->encoding == NULL) { |
| assert(tok->decoding_readline == NULL); |
| if (strcmp(cs, "utf-8") != 0 && !set_readline(tok, cs)) { |
| error_ret(tok); |
| PyErr_Format(PyExc_SyntaxError, "encoding problem: %s", cs); |
| PyMem_Free(cs); |
| return 0; |
| } |
| tok->encoding = cs; |
| } else { /* then, compare cs with BOM */ |
| if (strcmp(tok->encoding, cs) != 0) { |
| error_ret(tok); |
| PyErr_Format(PyExc_SyntaxError, |
| "encoding problem: %s with BOM", cs); |
| PyMem_Free(cs); |
| return 0; |
| } |
| PyMem_Free(cs); |
| } |
| return 1; |
| } |
| |
| /* See whether the file starts with a BOM. If it does, |
| invoke the set_readline function with the new encoding. |
| Return 1 on success, 0 on failure. */ |
| |
| static int |
| check_bom(int get_char(struct tok_state *), |
| void unget_char(int, struct tok_state *), |
| int set_readline(struct tok_state *, const char *), |
| struct tok_state *tok) |
| { |
| int ch1, ch2, ch3; |
| ch1 = get_char(tok); |
| tok->decoding_state = STATE_SEEK_CODING; |
| if (ch1 == EOF) { |
| return 1; |
| } else if (ch1 == 0xEF) { |
| ch2 = get_char(tok); |
| if (ch2 != 0xBB) { |
| unget_char(ch2, tok); |
| unget_char(ch1, tok); |
| return 1; |
| } |
| ch3 = get_char(tok); |
| if (ch3 != 0xBF) { |
| unget_char(ch3, tok); |
| unget_char(ch2, tok); |
| unget_char(ch1, tok); |
| return 1; |
| } |
| } else { |
| unget_char(ch1, tok); |
| return 1; |
| } |
| if (tok->encoding != NULL) |
| PyMem_Free(tok->encoding); |
| tok->encoding = new_string("utf-8", 5, tok); |
| if (!tok->encoding) |
| return 0; |
| /* No need to set_readline: input is already utf-8 */ |
| return 1; |
| } |
| |
| static int |
| tok_concatenate_interactive_new_line(struct tok_state *tok, const char *line) { |
| assert(tok->fp_interactive); |
| |
| if (!line) { |
| return 0; |
| } |
| |
| Py_ssize_t current_size = tok->interactive_src_end - tok->interactive_src_start; |
| Py_ssize_t line_size = strlen(line); |
| char last_char = line[line_size > 0 ? line_size - 1 : line_size]; |
| if (last_char != '\n') { |
| line_size += 1; |
| } |
| char* new_str = tok->interactive_src_start; |
| |
| new_str = PyMem_Realloc(new_str, current_size + line_size + 1); |
| if (!new_str) { |
| if (tok->interactive_src_start) { |
| PyMem_Free(tok->interactive_src_start); |
| } |
| tok->interactive_src_start = NULL; |
| tok->interactive_src_end = NULL; |
| tok->done = E_NOMEM; |
| return -1; |
| } |
| strcpy(new_str + current_size, line); |
| if (last_char != '\n') { |
| /* Last line does not end in \n, fake one */ |
| new_str[current_size + line_size - 1] = '\n'; |
| new_str[current_size + line_size] = '\0'; |
| } |
| tok->interactive_src_start = new_str; |
| tok->interactive_src_end = new_str + current_size + line_size; |
| return 0; |
| } |
| |
| /* Traverse and remember all f-string buffers, in order to be able to restore |
| them after reallocating tok->buf */ |
| static void |
| remember_fstring_buffers(struct tok_state *tok) |
| { |
| int index; |
| tokenizer_mode *mode; |
| |
| for (index = tok->tok_mode_stack_index; index >= 0; --index) { |
| mode = &(tok->tok_mode_stack[index]); |
| mode->f_string_start_offset = mode->f_string_start - tok->buf; |
| mode->f_string_multi_line_start_offset = mode->f_string_multi_line_start - tok->buf; |
| } |
| } |
| |
| /* Traverse and restore all f-string buffers after reallocating tok->buf */ |
| static void |
| restore_fstring_buffers(struct tok_state *tok) |
| { |
| int index; |
| tokenizer_mode *mode; |
| |
| for (index = tok->tok_mode_stack_index; index >= 0; --index) { |
| mode = &(tok->tok_mode_stack[index]); |
| mode->f_string_start = tok->buf + mode->f_string_start_offset; |
| mode->f_string_multi_line_start = tok->buf + mode->f_string_multi_line_start_offset; |
| } |
| } |
| |
| static int |
| set_fstring_expr(struct tok_state* tok, struct token *token, char c) { |
| assert(token != NULL); |
| assert(c == '}' || c == ':' || c == '!'); |
| tokenizer_mode *tok_mode = TOK_GET_MODE(tok); |
| |
| if (!tok_mode->f_string_debug || token->metadata) { |
| return 0; |
| } |
| |
| PyObject *res = PyUnicode_DecodeUTF8( |
| tok_mode->last_expr_buffer, |
| tok_mode->last_expr_size - tok_mode->last_expr_end, |
| NULL |
| ); |
| if (!res) { |
| return -1; |
| } |
| token->metadata = res; |
| return 0; |
| } |
| |
| static int |
| update_fstring_expr(struct tok_state *tok, char cur) |
| { |
| assert(tok->cur != NULL); |
| |
| Py_ssize_t size = strlen(tok->cur); |
| tokenizer_mode *tok_mode = TOK_GET_MODE(tok); |
| |
| switch (cur) { |
| case 0: |
| if (!tok_mode->last_expr_buffer || tok_mode->last_expr_end >= 0) { |
| return 1; |
| } |
| char *new_buffer = PyMem_Realloc( |
| tok_mode->last_expr_buffer, |
| tok_mode->last_expr_size + size |
| ); |
| if (new_buffer == NULL) { |
| PyMem_Free(tok_mode->last_expr_buffer); |
| goto error; |
| } |
| tok_mode->last_expr_buffer = new_buffer; |
| strncpy(tok_mode->last_expr_buffer + tok_mode->last_expr_size, tok->cur, size); |
| tok_mode->last_expr_size += size; |
| break; |
| case '{': |
| if (tok_mode->last_expr_buffer != NULL) { |
| PyMem_Free(tok_mode->last_expr_buffer); |
| } |
| tok_mode->last_expr_buffer = PyMem_Malloc(size); |
| if (tok_mode->last_expr_buffer == NULL) { |
| goto error; |
| } |
| tok_mode->last_expr_size = size; |
| tok_mode->last_expr_end = -1; |
| strncpy(tok_mode->last_expr_buffer, tok->cur, size); |
| break; |
| case '}': |
| case '!': |
| case ':': |
| if (tok_mode->last_expr_end == -1) { |
| tok_mode->last_expr_end = strlen(tok->start); |
| } |
| break; |
| default: |
| Py_UNREACHABLE(); |
| } |
| return 1; |
| error: |
| tok->done = E_NOMEM; |
| return 0; |
| } |
| |
| static void |
| free_fstring_expressions(struct tok_state *tok) |
| { |
| int index; |
| tokenizer_mode *mode; |
| |
| for (index = tok->tok_mode_stack_index; index >= 0; --index) { |
| mode = &(tok->tok_mode_stack[index]); |
| if (mode->last_expr_buffer != NULL) { |
| PyMem_Free(mode->last_expr_buffer); |
| mode->last_expr_buffer = NULL; |
| mode->last_expr_size = 0; |
| mode->last_expr_end = -1; |
| } |
| } |
| } |
| |
| /* Read a line of text from TOK into S, using the stream in TOK. |
| Return NULL on failure, else S. |
| |
| On entry, tok->decoding_buffer will be one of: |
| 1) NULL: need to call tok->decoding_readline to get a new line |
| 2) PyUnicodeObject *: decoding_feof has called tok->decoding_readline and |
| stored the result in tok->decoding_buffer |
| 3) PyByteArrayObject *: previous call to tok_readline_recode did not have enough room |
| (in the s buffer) to copy entire contents of the line read |
| by tok->decoding_readline. tok->decoding_buffer has the overflow. |
| In this case, tok_readline_recode is called in a loop (with an expanded buffer) |
| until the buffer ends with a '\n' (or until the end of the file is |
| reached): see tok_nextc and its calls to tok_reserve_buf. |
| */ |
| |
| static int |
| tok_reserve_buf(struct tok_state *tok, Py_ssize_t size) |
| { |
| Py_ssize_t cur = tok->cur - tok->buf; |
| Py_ssize_t oldsize = tok->inp - tok->buf; |
| Py_ssize_t newsize = oldsize + Py_MAX(size, oldsize >> 1); |
| if (newsize > tok->end - tok->buf) { |
| char *newbuf = tok->buf; |
| Py_ssize_t start = tok->start == NULL ? -1 : tok->start - tok->buf; |
| Py_ssize_t line_start = tok->start == NULL ? -1 : tok->line_start - tok->buf; |
| Py_ssize_t multi_line_start = tok->multi_line_start - tok->buf; |
| remember_fstring_buffers(tok); |
| newbuf = (char *)PyMem_Realloc(newbuf, newsize); |
| if (newbuf == NULL) { |
| tok->done = E_NOMEM; |
| return 0; |
| } |
| tok->buf = newbuf; |
| tok->cur = tok->buf + cur; |
| tok->inp = tok->buf + oldsize; |
| tok->end = tok->buf + newsize; |
| tok->start = start < 0 ? NULL : tok->buf + start; |
| tok->line_start = line_start < 0 ? NULL : tok->buf + line_start; |
| tok->multi_line_start = multi_line_start < 0 ? NULL : tok->buf + multi_line_start; |
| restore_fstring_buffers(tok); |
| } |
| return 1; |
| } |
| |
| static inline int |
| contains_null_bytes(const char* str, size_t size) { |
| return memchr(str, 0, size) != NULL; |
| } |
| |
| static int |
| tok_readline_recode(struct tok_state *tok) { |
| PyObject *line; |
| const char *buf; |
| Py_ssize_t buflen; |
| line = tok->decoding_buffer; |
| if (line == NULL) { |
| line = PyObject_CallNoArgs(tok->decoding_readline); |
| if (line == NULL) { |
| error_ret(tok); |
| goto error; |
| } |
| } |
| else { |
| tok->decoding_buffer = NULL; |
| } |
| buf = PyUnicode_AsUTF8AndSize(line, &buflen); |
| if (buf == NULL) { |
| error_ret(tok); |
| goto error; |
| } |
| // Make room for the null terminator *and* potentially |
| // an extra newline character that we may need to artificially |
| // add. |
| size_t buffer_size = buflen + 2; |
| if (!tok_reserve_buf(tok, buffer_size)) { |
| goto error; |
| } |
| memcpy(tok->inp, buf, buflen); |
| tok->inp += buflen; |
| *tok->inp = '\0'; |
| if (tok->fp_interactive && |
| tok_concatenate_interactive_new_line(tok, buf) == -1) { |
| goto error; |
| } |
| Py_DECREF(line); |
| return 1; |
| error: |
| Py_XDECREF(line); |
| return 0; |
| } |
| |
| /* Set the readline function for TOK to a StreamReader's |
| readline function. The StreamReader is named ENC. |
| |
| This function is called from check_bom and check_coding_spec. |
| |
| ENC is usually identical to the future value of tok->encoding, |
| except for the (currently unsupported) case of UTF-16. |
| |
| Return 1 on success, 0 on failure. */ |
| |
| static int |
| fp_setreadl(struct tok_state *tok, const char* enc) |
| { |
| PyObject *readline, *open, *stream; |
| int fd; |
| long pos; |
| |
| fd = fileno(tok->fp); |
| /* Due to buffering the file offset for fd can be different from the file |
| * position of tok->fp. If tok->fp was opened in text mode on Windows, |
| * its file position counts CRLF as one char and can't be directly mapped |
| * to the file offset for fd. Instead we step back one byte and read to |
| * the end of line.*/ |
| pos = ftell(tok->fp); |
| if (pos == -1 || |
| lseek(fd, (off_t)(pos > 0 ? pos - 1 : pos), SEEK_SET) == (off_t)-1) { |
| PyErr_SetFromErrnoWithFilename(PyExc_OSError, NULL); |
| return 0; |
| } |
| |
| open = _PyImport_GetModuleAttrString("io", "open"); |
| if (open == NULL) { |
| return 0; |
| } |
| stream = PyObject_CallFunction(open, "isisOOO", |
| fd, "r", -1, enc, Py_None, Py_None, Py_False); |
| Py_DECREF(open); |
| if (stream == NULL) { |
| return 0; |
| } |
| |
| readline = PyObject_GetAttr(stream, &_Py_ID(readline)); |
| Py_DECREF(stream); |
| if (readline == NULL) { |
| return 0; |
| } |
| Py_XSETREF(tok->decoding_readline, readline); |
| |
| if (pos > 0) { |
| PyObject *bufobj = _PyObject_CallNoArgs(readline); |
| if (bufobj == NULL) { |
| return 0; |
| } |
| Py_DECREF(bufobj); |
| } |
| |
| return 1; |
| } |
| |
| /* Fetch the next byte from TOK. */ |
| |
| static int fp_getc(struct tok_state *tok) { |
| return getc(tok->fp); |
| } |
| |
| /* Unfetch the last byte back into TOK. */ |
| |
| static void fp_ungetc(int c, struct tok_state *tok) { |
| ungetc(c, tok->fp); |
| } |
| |
| /* Check whether the characters at s start a valid |
| UTF-8 sequence. Return the number of characters forming |
| the sequence if yes, 0 if not. The special cases match |
| those in stringlib/codecs.h:utf8_decode. |
| */ |
| static int |
| valid_utf8(const unsigned char* s) |
| { |
| int expected = 0; |
| int length; |
| if (*s < 0x80) { |
| /* single-byte code */ |
| return 1; |
| } |
| else if (*s < 0xE0) { |
| /* \xC2\x80-\xDF\xBF -- 0080-07FF */ |
| if (*s < 0xC2) { |
| /* invalid sequence |
| \x80-\xBF -- continuation byte |
| \xC0-\xC1 -- fake 0000-007F */ |
| return 0; |
| } |
| expected = 1; |
| } |
| else if (*s < 0xF0) { |
| /* \xE0\xA0\x80-\xEF\xBF\xBF -- 0800-FFFF */ |
| if (*s == 0xE0 && *(s + 1) < 0xA0) { |
| /* invalid sequence |
| \xE0\x80\x80-\xE0\x9F\xBF -- fake 0000-0800 */ |
| return 0; |
| } |
| else if (*s == 0xED && *(s + 1) >= 0xA0) { |
| /* Decoding UTF-8 sequences in range \xED\xA0\x80-\xED\xBF\xBF |
| will result in surrogates in range D800-DFFF. Surrogates are |
| not valid UTF-8 so they are rejected. |
| See https://www.unicode.org/versions/Unicode5.2.0/ch03.pdf |
| (table 3-7) and http://www.rfc-editor.org/rfc/rfc3629.txt */ |
| return 0; |
| } |
| expected = 2; |
| } |
| else if (*s < 0xF5) { |
| /* \xF0\x90\x80\x80-\xF4\x8F\xBF\xBF -- 10000-10FFFF */ |
| if (*(s + 1) < 0x90 ? *s == 0xF0 : *s == 0xF4) { |
| /* invalid sequence -- one of: |
| \xF0\x80\x80\x80-\xF0\x8F\xBF\xBF -- fake 0000-FFFF |
| \xF4\x90\x80\x80- -- 110000- overflow */ |
| return 0; |
| } |
| expected = 3; |
| } |
| else { |
| /* invalid start byte */ |
| return 0; |
| } |
| length = expected + 1; |
| for (; expected; expected--) |
| if (s[expected] < 0x80 || s[expected] >= 0xC0) |
| return 0; |
| return length; |
| } |
| |
| static int |
| ensure_utf8(char *line, struct tok_state *tok) |
| { |
| int badchar = 0; |
| unsigned char *c; |
| int length; |
| for (c = (unsigned char *)line; *c; c += length) { |
| if (!(length = valid_utf8(c))) { |
| badchar = *c; |
| break; |
| } |
| } |
| if (badchar) { |
| PyErr_Format(PyExc_SyntaxError, |
| "Non-UTF-8 code starting with '\\x%.2x' " |
| "in file %U on line %i, " |
| "but no encoding declared; " |
| "see https://peps.python.org/pep-0263/ for details", |
| badchar, tok->filename, tok->lineno); |
| return 0; |
| } |
| return 1; |
| } |
| |
| /* Fetch a byte from TOK, using the string buffer. */ |
| |
| static int |
| buf_getc(struct tok_state *tok) { |
| return Py_CHARMASK(*tok->str++); |
| } |
| |
| /* Unfetch a byte from TOK, using the string buffer. */ |
| |
| static void |
| buf_ungetc(int c, struct tok_state *tok) { |
| tok->str--; |
| assert(Py_CHARMASK(*tok->str) == c); /* tok->cur may point to read-only segment */ |
| } |
| |
| /* Set the readline function for TOK to ENC. For the string-based |
| tokenizer, this means to just record the encoding. */ |
| |
| static int |
| buf_setreadl(struct tok_state *tok, const char* enc) { |
| tok->enc = enc; |
| return 1; |
| } |
| |
| /* Return a UTF-8 encoding Python string object from the |
| C byte string STR, which is encoded with ENC. */ |
| |
| static PyObject * |
| translate_into_utf8(const char* str, const char* enc) { |
| PyObject *utf8; |
| PyObject* buf = PyUnicode_Decode(str, strlen(str), enc, NULL); |
| if (buf == NULL) |
| return NULL; |
| utf8 = PyUnicode_AsUTF8String(buf); |
| Py_DECREF(buf); |
| return utf8; |
| } |
| |
| |
| static char * |
| translate_newlines(const char *s, int exec_input, struct tok_state *tok) { |
| int skip_next_lf = 0; |
| size_t needed_length = strlen(s) + 2, final_length; |
| char *buf, *current; |
| char c = '\0'; |
| buf = PyMem_Malloc(needed_length); |
| if (buf == NULL) { |
| tok->done = E_NOMEM; |
| return NULL; |
| } |
| for (current = buf; *s; s++, current++) { |
| c = *s; |
| if (skip_next_lf) { |
| skip_next_lf = 0; |
| if (c == '\n') { |
| c = *++s; |
| if (!c) |
| break; |
| } |
| } |
| if (c == '\r') { |
| skip_next_lf = 1; |
| c = '\n'; |
| } |
| *current = c; |
| } |
| /* If this is exec input, add a newline to the end of the string if |
| there isn't one already. */ |
| if (exec_input && c != '\n') { |
| *current = '\n'; |
| current++; |
| } |
| *current = '\0'; |
| final_length = current - buf + 1; |
| if (final_length < needed_length && final_length) { |
| /* should never fail */ |
| char* result = PyMem_Realloc(buf, final_length); |
| if (result == NULL) { |
| PyMem_Free(buf); |
| } |
| buf = result; |
| } |
| return buf; |
| } |
| |
| /* Decode a byte string STR for use as the buffer of TOK. |
| Look for encoding declarations inside STR, and record them |
| inside TOK. */ |
| |
| static char * |
| decode_str(const char *input, int single, struct tok_state *tok) |
| { |
| PyObject* utf8 = NULL; |
| char *str; |
| const char *s; |
| const char *newl[2] = {NULL, NULL}; |
| int lineno = 0; |
| tok->input = str = translate_newlines(input, single, tok); |
| if (str == NULL) |
| return NULL; |
| tok->enc = NULL; |
| tok->str = str; |
| if (!check_bom(buf_getc, buf_ungetc, buf_setreadl, tok)) |
| return error_ret(tok); |
| str = tok->str; /* string after BOM if any */ |
| assert(str); |
| if (tok->enc != NULL) { |
| utf8 = translate_into_utf8(str, tok->enc); |
| if (utf8 == NULL) |
| return error_ret(tok); |
| str = PyBytes_AsString(utf8); |
| } |
| for (s = str;; s++) { |
| if (*s == '\0') break; |
| else if (*s == '\n') { |
| assert(lineno < 2); |
| newl[lineno] = s; |
| lineno++; |
| if (lineno == 2) break; |
| } |
| } |
| tok->enc = NULL; |
| /* need to check line 1 and 2 separately since check_coding_spec |
| assumes a single line as input */ |
| if (newl[0]) { |
| if (!check_coding_spec(str, newl[0] - str, tok, buf_setreadl)) { |
| return NULL; |
| } |
| if (tok->enc == NULL && tok->decoding_state != STATE_NORMAL && newl[1]) { |
| if (!check_coding_spec(newl[0]+1, newl[1] - newl[0], |
| tok, buf_setreadl)) |
| return NULL; |
| } |
| } |
| if (tok->enc != NULL) { |
| assert(utf8 == NULL); |
| utf8 = translate_into_utf8(str, tok->enc); |
| if (utf8 == NULL) |
| return error_ret(tok); |
| str = PyBytes_AS_STRING(utf8); |
| } |
| assert(tok->decoding_buffer == NULL); |
| tok->decoding_buffer = utf8; /* CAUTION */ |
| return str; |
| } |
| |
| /* Set up tokenizer for string */ |
| |
| struct tok_state * |
| _PyTokenizer_FromString(const char *str, int exec_input) |
| { |
| struct tok_state *tok = tok_new(); |
| char *decoded; |
| |
| if (tok == NULL) |
| return NULL; |
| decoded = decode_str(str, exec_input, tok); |
| if (decoded == NULL) { |
| _PyTokenizer_Free(tok); |
| return NULL; |
| } |
| |
| tok->buf = tok->cur = tok->inp = decoded; |
| tok->end = decoded; |
| return tok; |
| } |
| |
| /* Set up tokenizer for UTF-8 string */ |
| |
| struct tok_state * |
| _PyTokenizer_FromUTF8(const char *str, int exec_input) |
| { |
| struct tok_state *tok = tok_new(); |
| char *translated; |
| if (tok == NULL) |
| return NULL; |
| tok->input = translated = translate_newlines(str, exec_input, tok); |
| if (translated == NULL) { |
| _PyTokenizer_Free(tok); |
| return NULL; |
| } |
| tok->decoding_state = STATE_NORMAL; |
| tok->enc = NULL; |
| tok->str = translated; |
| tok->encoding = new_string("utf-8", 5, tok); |
| if (!tok->encoding) { |
| _PyTokenizer_Free(tok); |
| return NULL; |
| } |
| |
| tok->buf = tok->cur = tok->inp = translated; |
| tok->end = translated; |
| return tok; |
| } |
| |
| /* Set up tokenizer for file */ |
| |
| struct tok_state * |
| _PyTokenizer_FromFile(FILE *fp, const char* enc, |
| const char *ps1, const char *ps2) |
| { |
| struct tok_state *tok = tok_new(); |
| if (tok == NULL) |
| return NULL; |
| if ((tok->buf = (char *)PyMem_Malloc(BUFSIZ)) == NULL) { |
| _PyTokenizer_Free(tok); |
| return NULL; |
| } |
| tok->cur = tok->inp = tok->buf; |
| tok->end = tok->buf + BUFSIZ; |
| tok->fp = fp; |
| tok->prompt = ps1; |
| tok->nextprompt = ps2; |
| if (enc != NULL) { |
| /* Must copy encoding declaration since it |
| gets copied into the parse tree. */ |
| tok->encoding = new_string(enc, strlen(enc), tok); |
| if (!tok->encoding) { |
| _PyTokenizer_Free(tok); |
| return NULL; |
| } |
| tok->decoding_state = STATE_NORMAL; |
| } |
| return tok; |
| } |
| |
| /* Free a tok_state structure */ |
| |
| void |
| _PyTokenizer_Free(struct tok_state *tok) |
| { |
| if (tok->encoding != NULL) { |
| PyMem_Free(tok->encoding); |
| } |
| Py_XDECREF(tok->decoding_readline); |
| Py_XDECREF(tok->decoding_buffer); |
| Py_XDECREF(tok->filename); |
| if (tok->fp != NULL && tok->buf != NULL) { |
| PyMem_Free(tok->buf); |
| } |
| if (tok->input) { |
| PyMem_Free(tok->input); |
| } |
| if (tok->interactive_src_start != NULL) { |
| PyMem_Free(tok->interactive_src_start); |
| } |
| free_fstring_expressions(tok); |
| PyMem_Free(tok); |
| } |
| |
| void |
| _PyToken_Free(struct token *token) { |
| Py_XDECREF(token->metadata); |
| } |
| |
| void |
| _PyToken_Init(struct token *token) { |
| token->metadata = NULL; |
| } |
| |
| static int |
| tok_readline_raw(struct tok_state *tok) |
| { |
| do { |
| if (!tok_reserve_buf(tok, BUFSIZ)) { |
| return 0; |
| } |
| int n_chars = (int)(tok->end - tok->inp); |
| size_t line_size = 0; |
| char *line = _Py_UniversalNewlineFgetsWithSize(tok->inp, n_chars, tok->fp, NULL, &line_size); |
| if (line == NULL) { |
| return 1; |
| } |
| if (tok->tok_mode_stack_index && !update_fstring_expr(tok, 0)) { |
| return 0; |
| } |
| if (tok->fp_interactive && |
| tok_concatenate_interactive_new_line(tok, line) == -1) { |
| return 0; |
| } |
| tok->inp += line_size; |
| if (tok->inp == tok->buf) { |
| return 0; |
| } |
| } while (tok->inp[-1] != '\n'); |
| return 1; |
| } |
| |
| static int |
| tok_underflow_string(struct tok_state *tok) { |
| char *end = strchr(tok->inp, '\n'); |
| if (end != NULL) { |
| end++; |
| } |
| else { |
| end = strchr(tok->inp, '\0'); |
| if (end == tok->inp) { |
| tok->done = E_EOF; |
| return 0; |
| } |
| } |
| if (tok->start == NULL) { |
| tok->buf = tok->cur; |
| } |
| tok->line_start = tok->cur; |
| ADVANCE_LINENO(); |
| tok->inp = end; |
| return 1; |
| } |
| |
| static int |
| tok_underflow_interactive(struct tok_state *tok) { |
| if (tok->interactive_underflow == IUNDERFLOW_STOP) { |
| tok->done = E_INTERACT_STOP; |
| return 1; |
| } |
| char *newtok = PyOS_Readline(tok->fp ? tok->fp : stdin, stdout, tok->prompt); |
| if (newtok != NULL) { |
| char *translated = translate_newlines(newtok, 0, tok); |
| PyMem_Free(newtok); |
| if (translated == NULL) { |
| return 0; |
| } |
| newtok = translated; |
| } |
| if (tok->encoding && newtok && *newtok) { |
| /* Recode to UTF-8 */ |
| Py_ssize_t buflen; |
| const char* buf; |
| PyObject *u = translate_into_utf8(newtok, tok->encoding); |
| PyMem_Free(newtok); |
| if (u == NULL) { |
| tok->done = E_DECODE; |
| return 0; |
| } |
| buflen = PyBytes_GET_SIZE(u); |
| buf = PyBytes_AS_STRING(u); |
| newtok = PyMem_Malloc(buflen+1); |
| if (newtok == NULL) { |
| Py_DECREF(u); |
| tok->done = E_NOMEM; |
| return 0; |
| } |
| strcpy(newtok, buf); |
| Py_DECREF(u); |
| } |
| if (tok->fp_interactive && |
| tok_concatenate_interactive_new_line(tok, newtok) == -1) { |
| PyMem_Free(newtok); |
| return 0; |
| } |
| if (tok->nextprompt != NULL) { |
| tok->prompt = tok->nextprompt; |
| } |
| if (newtok == NULL) { |
| tok->done = E_INTR; |
| } |
| else if (*newtok == '\0') { |
| PyMem_Free(newtok); |
| tok->done = E_EOF; |
| } |
| else if (tok->start != NULL) { |
| Py_ssize_t cur_multi_line_start = tok->multi_line_start - tok->buf; |
| remember_fstring_buffers(tok); |
| size_t size = strlen(newtok); |
| ADVANCE_LINENO(); |
| if (!tok_reserve_buf(tok, size + 1)) { |
| PyMem_Free(tok->buf); |
| tok->buf = NULL; |
| PyMem_Free(newtok); |
| return 0; |
| } |
| memcpy(tok->cur, newtok, size + 1); |
| PyMem_Free(newtok); |
| tok->inp += size; |
| tok->multi_line_start = tok->buf + cur_multi_line_start; |
| restore_fstring_buffers(tok); |
| } |
| else { |
| remember_fstring_buffers(tok); |
| ADVANCE_LINENO(); |
| PyMem_Free(tok->buf); |
| tok->buf = newtok; |
| tok->cur = tok->buf; |
| tok->line_start = tok->buf; |
| tok->inp = strchr(tok->buf, '\0'); |
| tok->end = tok->inp + 1; |
| restore_fstring_buffers(tok); |
| } |
| if (tok->done != E_OK) { |
| if (tok->prompt != NULL) { |
| PySys_WriteStderr("\n"); |
| } |
| return 0; |
| } |
| |
| if (tok->tok_mode_stack_index && !update_fstring_expr(tok, 0)) { |
| return 0; |
| } |
| return 1; |
| } |
| |
| static int |
| tok_underflow_file(struct tok_state *tok) { |
| if (tok->start == NULL && !INSIDE_FSTRING(tok)) { |
| tok->cur = tok->inp = tok->buf; |
| } |
| if (tok->decoding_state == STATE_INIT) { |
| /* We have not yet determined the encoding. |
| If an encoding is found, use the file-pointer |
| reader functions from now on. */ |
| if (!check_bom(fp_getc, fp_ungetc, fp_setreadl, tok)) { |
| error_ret(tok); |
| return 0; |
| } |
| assert(tok->decoding_state != STATE_INIT); |
| } |
| /* Read until '\n' or EOF */ |
| if (tok->decoding_readline != NULL) { |
| /* We already have a codec associated with this input. */ |
| if (!tok_readline_recode(tok)) { |
| return 0; |
| } |
| } |
| else { |
| /* We want a 'raw' read. */ |
| if (!tok_readline_raw(tok)) { |
| return 0; |
| } |
| } |
| if (tok->inp == tok->cur) { |
| tok->done = E_EOF; |
| return 0; |
| } |
| if (tok->inp[-1] != '\n') { |
| assert(tok->inp + 1 < tok->end); |
| /* Last line does not end in \n, fake one */ |
| *tok->inp++ = '\n'; |
| *tok->inp = '\0'; |
| } |
| |
| ADVANCE_LINENO(); |
| if (tok->decoding_state != STATE_NORMAL) { |
| if (tok->lineno > 2) { |
| tok->decoding_state = STATE_NORMAL; |
| } |
| else if (!check_coding_spec(tok->cur, strlen(tok->cur), |
| tok, fp_setreadl)) |
| { |
| return 0; |
| } |
| } |
| /* The default encoding is UTF-8, so make sure we don't have any |
| non-UTF-8 sequences in it. */ |
| if (!tok->encoding && !ensure_utf8(tok->cur, tok)) { |
| error_ret(tok); |
| return 0; |
| } |
| assert(tok->done == E_OK); |
| return tok->done == E_OK; |
| } |
| |
| #if defined(Py_DEBUG) |
| static void |
| print_escape(FILE *f, const char *s, Py_ssize_t size) |
| { |
| if (s == NULL) { |
| fputs("NULL", f); |
| return; |
| } |
| putc('"', f); |
| while (size-- > 0) { |
| unsigned char c = *s++; |
| switch (c) { |
| case '\n': fputs("\\n", f); break; |
| case '\r': fputs("\\r", f); break; |
| case '\t': fputs("\\t", f); break; |
| case '\f': fputs("\\f", f); break; |
| case '\'': fputs("\\'", f); break; |
| case '"': fputs("\\\"", f); break; |
| default: |
| if (0x20 <= c && c <= 0x7f) |
| putc(c, f); |
| else |
| fprintf(f, "\\x%02x", c); |
| } |
| } |
| putc('"', f); |
| } |
| #endif |
| |
| /* Get next char, updating state; error code goes into tok->done */ |
| |
| static int |
| tok_nextc(struct tok_state *tok) |
| { |
| int rc; |
| for (;;) { |
| if (tok->cur != tok->inp) { |
| tok->col_offset++; |
| return Py_CHARMASK(*tok->cur++); /* Fast path */ |
| } |
| if (tok->done != E_OK) { |
| return EOF; |
| } |
| if (tok->fp == NULL) { |
| rc = tok_underflow_string(tok); |
| } |
| else if (tok->prompt != NULL) { |
| rc = tok_underflow_interactive(tok); |
| } |
| else { |
| rc = tok_underflow_file(tok); |
| } |
| #if defined(Py_DEBUG) |
| if (tok->debug) { |
| fprintf(stderr, "line[%d] = ", tok->lineno); |
| print_escape(stderr, tok->cur, tok->inp - tok->cur); |
| fprintf(stderr, " tok->done = %d\n", tok->done); |
| } |
| #endif |
| if (!rc) { |
| tok->cur = tok->inp; |
| return EOF; |
| } |
| tok->line_start = tok->cur; |
| |
| if (contains_null_bytes(tok->line_start, tok->inp - tok->line_start)) { |
| syntaxerror(tok, "source code cannot contain null bytes"); |
| tok->cur = tok->inp; |
| return EOF; |
| } |
| } |
| Py_UNREACHABLE(); |
| } |
| |
| /* Back-up one character */ |
| |
| static void |
| tok_backup(struct tok_state *tok, int c) |
| { |
| if (c != EOF) { |
| if (--tok->cur < tok->buf) { |
| Py_FatalError("tokenizer beginning of buffer"); |
| } |
| if ((int)(unsigned char)*tok->cur != Py_CHARMASK(c)) { |
| Py_FatalError("tok_backup: wrong character"); |
| } |
| tok->col_offset--; |
| } |
| } |
| |
| static int |
| _syntaxerror_range(struct tok_state *tok, const char *format, |
| int col_offset, int end_col_offset, |
| va_list vargs) |
| { |
| // In release builds, we don't want to overwrite a previous error, but in debug builds we |
| // want to fail if we are not doing it so we can fix it. |
| assert(tok->done != E_ERROR); |
| if (tok->done == E_ERROR) { |
| return ERRORTOKEN; |
| } |
| PyObject *errmsg, *errtext, *args; |
| errmsg = PyUnicode_FromFormatV(format, vargs); |
| if (!errmsg) { |
| goto error; |
| } |
| |
| errtext = PyUnicode_DecodeUTF8(tok->line_start, tok->cur - tok->line_start, |
| "replace"); |
| if (!errtext) { |
| goto error; |
| } |
| |
| if (col_offset == -1) { |
| col_offset = (int)PyUnicode_GET_LENGTH(errtext); |
| } |
| if (end_col_offset == -1) { |
| end_col_offset = col_offset; |
| } |
| |
| Py_ssize_t line_len = strcspn(tok->line_start, "\n"); |
| if (line_len != tok->cur - tok->line_start) { |
| Py_DECREF(errtext); |
| errtext = PyUnicode_DecodeUTF8(tok->line_start, line_len, |
| "replace"); |
| } |
| if (!errtext) { |
| goto error; |
| } |
| |
| args = Py_BuildValue("(O(OiiNii))", errmsg, tok->filename, tok->lineno, |
| col_offset, errtext, tok->lineno, end_col_offset); |
| if (args) { |
| PyErr_SetObject(PyExc_SyntaxError, args); |
| Py_DECREF(args); |
| } |
| |
| error: |
| Py_XDECREF(errmsg); |
| tok->done = E_ERROR; |
| return ERRORTOKEN; |
| } |
| |
| static int |
| syntaxerror(struct tok_state *tok, const char *format, ...) |
| { |
| // This errors are cleaned on startup. Todo: Fix it. |
| va_list vargs; |
| va_start(vargs, format); |
| int ret = _syntaxerror_range(tok, format, -1, -1, vargs); |
| va_end(vargs); |
| return ret; |
| } |
| |
| static int |
| syntaxerror_known_range(struct tok_state *tok, |
| int col_offset, int end_col_offset, |
| const char *format, ...) |
| { |
| va_list vargs; |
| va_start(vargs, format); |
| int ret = _syntaxerror_range(tok, format, col_offset, end_col_offset, vargs); |
| va_end(vargs); |
| return ret; |
| } |
| |
| static int |
| indenterror(struct tok_state *tok) |
| { |
| tok->done = E_TABSPACE; |
| tok->cur = tok->inp; |
| return ERRORTOKEN; |
| } |
| |
| static int |
| parser_warn(struct tok_state *tok, PyObject *category, const char *format, ...) |
| { |
| if (!tok->report_warnings) { |
| return 0; |
| } |
| |
| PyObject *errmsg; |
| va_list vargs; |
| va_start(vargs, format); |
| errmsg = PyUnicode_FromFormatV(format, vargs); |
| va_end(vargs); |
| if (!errmsg) { |
| goto error; |
| } |
| |
| if (PyErr_WarnExplicitObject(category, errmsg, tok->filename, |
| tok->lineno, NULL, NULL) < 0) { |
| if (PyErr_ExceptionMatches(category)) { |
| /* Replace the DeprecationWarning exception with a SyntaxError |
| to get a more accurate error report */ |
| PyErr_Clear(); |
| syntaxerror(tok, "%U", errmsg); |
| } |
| goto error; |
| } |
| Py_DECREF(errmsg); |
| return 0; |
| |
| error: |
| Py_XDECREF(errmsg); |
| tok->done = E_ERROR; |
| return -1; |
| } |
| |
| static int |
| warn_invalid_escape_sequence(struct tok_state *tok, int first_invalid_escape_char) |
| { |
| |
| if (!tok->tok_report_warnings) { |
| return 0; |
| } |
| |
| PyObject *msg = PyUnicode_FromFormat( |
| "invalid escape sequence '\\%c'", |
| (char) first_invalid_escape_char |
| ); |
| |
| if (msg == NULL) { |
| return -1; |
| } |
| |
| if (PyErr_WarnExplicitObject(PyExc_DeprecationWarning, msg, tok->filename, |
| tok->lineno, NULL, NULL) < 0) { |
| Py_DECREF(msg); |
| |
| if (PyErr_ExceptionMatches(PyExc_DeprecationWarning)) { |
| /* Replace the DeprecationWarning exception with a SyntaxError |
| to get a more accurate error report */ |
| PyErr_Clear(); |
| return syntaxerror(tok, "invalid escape sequence '\\%c'", (char) first_invalid_escape_char); |
| } |
| |
| return -1; |
| } |
| |
| Py_DECREF(msg); |
| return 0; |
| } |
| |
| static int |
| lookahead(struct tok_state *tok, const char *test) |
| { |
| const char *s = test; |
| int res = 0; |
| while (1) { |
| int c = tok_nextc(tok); |
| if (*s == 0) { |
| res = !is_potential_identifier_char(c); |
| } |
| else if (c == *s) { |
| s++; |
| continue; |
| } |
| |
| tok_backup(tok, c); |
| while (s != test) { |
| tok_backup(tok, *--s); |
| } |
| return res; |
| } |
| } |
| |
| static int |
| verify_end_of_number(struct tok_state *tok, int c, const char *kind) |
| { |
| /* Emit a deprecation warning only if the numeric literal is immediately |
| * followed by one of keywords which can occur after a numeric literal |
| * in valid code: "and", "else", "for", "if", "in", "is" and "or". |
| * It allows to gradually deprecate existing valid code without adding |
| * warning before error in most cases of invalid numeric literal (which |
| * would be confusing and break existing tests). |
| * Raise a syntax error with slightly better message than plain |
| * "invalid syntax" if the numeric literal is immediately followed by |
| * other keyword or identifier. |
| */ |
| int r = 0; |
| if (c == 'a') { |
| r = lookahead(tok, "nd"); |
| } |
| else if (c == 'e') { |
| r = lookahead(tok, "lse"); |
| } |
| else if (c == 'f') { |
| r = lookahead(tok, "or"); |
| } |
| else if (c == 'i') { |
| int c2 = tok_nextc(tok); |
| if (c2 == 'f' || c2 == 'n' || c2 == 's') { |
| r = 1; |
| } |
| tok_backup(tok, c2); |
| } |
| else if (c == 'o') { |
| r = lookahead(tok, "r"); |
| } |
| else if (c == 'n') { |
| r = lookahead(tok, "ot"); |
| } |
| if (r) { |
| tok_backup(tok, c); |
| if (parser_warn(tok, PyExc_SyntaxWarning, |
| "invalid %s literal", kind)) |
| { |
| return 0; |
| } |
| tok_nextc(tok); |
| } |
| else /* In future releases, only error will remain. */ |
| if (is_potential_identifier_char(c)) { |
| tok_backup(tok, c); |
| syntaxerror(tok, "invalid %s literal", kind); |
| return 0; |
| } |
| return 1; |
| } |
| |
| /* Verify that the identifier follows PEP 3131. |
| All identifier strings are guaranteed to be "ready" unicode objects. |
| */ |
| static int |
| verify_identifier(struct tok_state *tok) |
| { |
| PyObject *s; |
| if (tok->decoding_erred) |
| return 0; |
| s = PyUnicode_DecodeUTF8(tok->start, tok->cur - tok->start, NULL); |
| if (s == NULL) { |
| if (PyErr_ExceptionMatches(PyExc_UnicodeDecodeError)) { |
| tok->done = E_DECODE; |
| } |
| else { |
| tok->done = E_ERROR; |
| } |
| return 0; |
| } |
| Py_ssize_t invalid = _PyUnicode_ScanIdentifier(s); |
| if (invalid < 0) { |
| Py_DECREF(s); |
| tok->done = E_ERROR; |
| return 0; |
| } |
| assert(PyUnicode_GET_LENGTH(s) > 0); |
| if (invalid < PyUnicode_GET_LENGTH(s)) { |
| Py_UCS4 ch = PyUnicode_READ_CHAR(s, invalid); |
| if (invalid + 1 < PyUnicode_GET_LENGTH(s)) { |
| /* Determine the offset in UTF-8 encoded input */ |
| Py_SETREF(s, PyUnicode_Substring(s, 0, invalid + 1)); |
| if (s != NULL) { |
| Py_SETREF(s, PyUnicode_AsUTF8String(s)); |
| } |
| if (s == NULL) { |
| tok->done = E_ERROR; |
| return 0; |
| } |
| tok->cur = (char *)tok->start + PyBytes_GET_SIZE(s); |
| } |
| Py_DECREF(s); |
| if (Py_UNICODE_ISPRINTABLE(ch)) { |
| syntaxerror(tok, "invalid character '%c' (U+%04X)", ch, ch); |
| } |
| else { |
| syntaxerror(tok, "invalid non-printable character U+%04X", ch); |
| } |
| return 0; |
| } |
| Py_DECREF(s); |
| return 1; |
| } |
| |
| static int |
| tok_decimal_tail(struct tok_state *tok) |
| { |
| int c; |
| |
| while (1) { |
| do { |
| c = tok_nextc(tok); |
| } while (isdigit(c)); |
| if (c != '_') { |
| break; |
| } |
| c = tok_nextc(tok); |
| if (!isdigit(c)) { |
| tok_backup(tok, c); |
| syntaxerror(tok, "invalid decimal literal"); |
| return 0; |
| } |
| } |
| return c; |
| } |
| |
| |
| static inline int |
| tok_continuation_line(struct tok_state *tok) { |
| int c = tok_nextc(tok); |
| if (c != '\n') { |
| tok->done = E_LINECONT; |
| return -1; |
| } |
| c = tok_nextc(tok); |
| if (c == EOF) { |
| tok->done = E_EOF; |
| tok->cur = tok->inp; |
| return -1; |
| } else { |
| tok_backup(tok, c); |
| } |
| return c; |
| } |
| |
| static int |
| type_comment_token_setup(struct tok_state *tok, struct token *token, int type, int col_offset, |
| int end_col_offset, const char *start, const char *end) |
| { |
| token->level = tok->level; |
| token->lineno = token->end_lineno = tok->lineno; |
| token->col_offset = col_offset; |
| token->end_col_offset = end_col_offset; |
| token->start = start; |
| token->end = end; |
| return type; |
| } |
| |
| static int |
| token_setup(struct tok_state *tok, struct token *token, int type, const char *start, const char *end) |
| { |
| assert((start == NULL && end == NULL) || (start != NULL && end != NULL)); |
| token->level = tok->level; |
| if (ISSTRINGLIT(type)) { |
| token->lineno = tok->first_lineno; |
| } |
| else { |
| token->lineno = tok->lineno; |
| } |
| token->end_lineno = tok->lineno; |
| token->col_offset = token->end_col_offset = -1; |
| token->start = start; |
| token->end = end; |
| |
| if (start != NULL && end != NULL) { |
| token->col_offset = tok->starting_col_offset; |
| token->end_col_offset = tok->col_offset; |
| } |
| return type; |
| } |
| |
| |
| static int |
| tok_get_normal_mode(struct tok_state *tok, tokenizer_mode* current_tok, struct token *token) |
| { |
| int c; |
| int blankline, nonascii; |
| |
| const char *p_start = NULL; |
| const char *p_end = NULL; |
| nextline: |
| tok->start = NULL; |
| tok->starting_col_offset = -1; |
| blankline = 0; |
| |
| |
| /* Get indentation level */ |
| if (tok->atbol) { |
| int col = 0; |
| int altcol = 0; |
| tok->atbol = 0; |
| int cont_line_col = 0; |
| for (;;) { |
| c = tok_nextc(tok); |
| if (c == ' ') { |
| col++, altcol++; |
| } |
| else if (c == '\t') { |
| col = (col / tok->tabsize + 1) * tok->tabsize; |
| altcol = (altcol / ALTTABSIZE + 1) * ALTTABSIZE; |
| } |
| else if (c == '\014') {/* Control-L (formfeed) */ |
| col = altcol = 0; /* For Emacs users */ |
| } |
| else if (c == '\\') { |
| // Indentation cannot be split over multiple physical lines |
| // using backslashes. This means that if we found a backslash |
| // preceded by whitespace, **the first one we find** determines |
| // the level of indentation of whatever comes next. |
| cont_line_col = cont_line_col ? cont_line_col : col; |
| if ((c = tok_continuation_line(tok)) == -1) { |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| } |
| else { |
| break; |
| } |
| } |
| tok_backup(tok, c); |
| if (c == '#' || c == '\n') { |
| /* Lines with only whitespace and/or comments |
| shouldn't affect the indentation and are |
| not passed to the parser as NEWLINE tokens, |
| except *totally* empty lines in interactive |
| mode, which signal the end of a command group. */ |
| if (col == 0 && c == '\n' && tok->prompt != NULL) { |
| blankline = 0; /* Let it through */ |
| } |
| else if (tok->prompt != NULL && tok->lineno == 1) { |
| /* In interactive mode, if the first line contains |
| only spaces and/or a comment, let it through. */ |
| blankline = 0; |
| col = altcol = 0; |
| } |
| else { |
| blankline = 1; /* Ignore completely */ |
| } |
| /* We can't jump back right here since we still |
| may need to skip to the end of a comment */ |
| } |
| if (!blankline && tok->level == 0) { |
| col = cont_line_col ? cont_line_col : col; |
| altcol = cont_line_col ? cont_line_col : altcol; |
| if (col == tok->indstack[tok->indent]) { |
| /* No change */ |
| if (altcol != tok->altindstack[tok->indent]) { |
| return MAKE_TOKEN(indenterror(tok)); |
| } |
| } |
| else if (col > tok->indstack[tok->indent]) { |
| /* Indent -- always one */ |
| if (tok->indent+1 >= MAXINDENT) { |
| tok->done = E_TOODEEP; |
| tok->cur = tok->inp; |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| if (altcol <= tok->altindstack[tok->indent]) { |
| return MAKE_TOKEN(indenterror(tok)); |
| } |
| tok->pendin++; |
| tok->indstack[++tok->indent] = col; |
| tok->altindstack[tok->indent] = altcol; |
| } |
| else /* col < tok->indstack[tok->indent] */ { |
| /* Dedent -- any number, must be consistent */ |
| while (tok->indent > 0 && |
| col < tok->indstack[tok->indent]) { |
| tok->pendin--; |
| tok->indent--; |
| } |
| if (col != tok->indstack[tok->indent]) { |
| tok->done = E_DEDENT; |
| tok->cur = tok->inp; |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| if (altcol != tok->altindstack[tok->indent]) { |
| return MAKE_TOKEN(indenterror(tok)); |
| } |
| } |
| } |
| } |
| |
| tok->start = tok->cur; |
| tok->starting_col_offset = tok->col_offset; |
| |
| /* Return pending indents/dedents */ |
| if (tok->pendin != 0) { |
| if (tok->pendin < 0) { |
| if (tok->tok_extra_tokens) { |
| p_start = tok->cur; |
| p_end = tok->cur; |
| } |
| tok->pendin++; |
| return MAKE_TOKEN(DEDENT); |
| } |
| else { |
| if (tok->tok_extra_tokens) { |
| p_start = tok->buf; |
| p_end = tok->cur; |
| } |
| tok->pendin--; |
| return MAKE_TOKEN(INDENT); |
| } |
| } |
| |
| /* Peek ahead at the next character */ |
| c = tok_nextc(tok); |
| tok_backup(tok, c); |
| /* Check if we are closing an async function */ |
| if (tok->async_def |
| && !blankline |
| /* Due to some implementation artifacts of type comments, |
| * a TYPE_COMMENT at the start of a function won't set an |
| * indentation level and it will produce a NEWLINE after it. |
| * To avoid spuriously ending an async function due to this, |
| * wait until we have some non-newline char in front of us. */ |
| && c != '\n' |
| && tok->level == 0 |
| /* There was a NEWLINE after ASYNC DEF, |
| so we're past the signature. */ |
| && tok->async_def_nl |
| /* Current indentation level is less than where |
| the async function was defined */ |
| && tok->async_def_indent >= tok->indent) |
| { |
| tok->async_def = 0; |
| tok->async_def_indent = 0; |
| tok->async_def_nl = 0; |
| } |
| |
| again: |
| tok->start = NULL; |
| /* Skip spaces */ |
| do { |
| c = tok_nextc(tok); |
| } while (c == ' ' || c == '\t' || c == '\014'); |
| |
| /* Set start of current token */ |
| tok->start = tok->cur == NULL ? NULL : tok->cur - 1; |
| tok->starting_col_offset = tok->col_offset - 1; |
| |
| /* Skip comment, unless it's a type comment */ |
| if (c == '#') { |
| |
| const char* p = NULL; |
| const char *prefix, *type_start; |
| int current_starting_col_offset; |
| |
| while (c != EOF && c != '\n') { |
| c = tok_nextc(tok); |
| } |
| |
| if (tok->tok_extra_tokens) { |
| p = tok->start; |
| } |
| |
| if (tok->type_comments) { |
| p = tok->start; |
| current_starting_col_offset = tok->starting_col_offset; |
| prefix = type_comment_prefix; |
| while (*prefix && p < tok->cur) { |
| if (*prefix == ' ') { |
| while (*p == ' ' || *p == '\t') { |
| p++; |
| current_starting_col_offset++; |
| } |
| } else if (*prefix == *p) { |
| p++; |
| current_starting_col_offset++; |
| } else { |
| break; |
| } |
| |
| prefix++; |
| } |
| |
| /* This is a type comment if we matched all of type_comment_prefix. */ |
| if (!*prefix) { |
| int is_type_ignore = 1; |
| // +6 in order to skip the word 'ignore' |
| const char *ignore_end = p + 6; |
| const int ignore_end_col_offset = current_starting_col_offset + 6; |
| tok_backup(tok, c); /* don't eat the newline or EOF */ |
| |
| type_start = p; |
| |
| /* A TYPE_IGNORE is "type: ignore" followed by the end of the token |
| * or anything ASCII and non-alphanumeric. */ |
| is_type_ignore = ( |
| tok->cur >= ignore_end && memcmp(p, "ignore", 6) == 0 |
| && !(tok->cur > ignore_end |
| && ((unsigned char)ignore_end[0] >= 128 || Py_ISALNUM(ignore_end[0])))); |
| |
| if (is_type_ignore) { |
| p_start = ignore_end; |
| p_end = tok->cur; |
| |
| /* If this type ignore is the only thing on the line, consume the newline also. */ |
| if (blankline) { |
| tok_nextc(tok); |
| tok->atbol = 1; |
| } |
| return MAKE_TYPE_COMMENT_TOKEN(TYPE_IGNORE, ignore_end_col_offset, tok->col_offset); |
| } else { |
| p_start = type_start; |
| p_end = tok->cur; |
| return MAKE_TYPE_COMMENT_TOKEN(TYPE_COMMENT, current_starting_col_offset, tok->col_offset); |
| } |
| } |
| } |
| if (tok->tok_extra_tokens) { |
| tok_backup(tok, c); /* don't eat the newline or EOF */ |
| p_start = p; |
| p_end = tok->cur; |
| tok->comment_newline = blankline; |
| return MAKE_TOKEN(COMMENT); |
| } |
| } |
| |
| if (tok->done == E_INTERACT_STOP) { |
| return MAKE_TOKEN(ENDMARKER); |
| } |
| |
| /* Check for EOF and errors now */ |
| if (c == EOF) { |
| if (tok->level) { |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| return MAKE_TOKEN(tok->done == E_EOF ? ENDMARKER : ERRORTOKEN); |
| } |
| |
| /* Identifier (most frequent token!) */ |
| nonascii = 0; |
| if (is_potential_identifier_start(c)) { |
| /* Process the various legal combinations of b"", r"", u"", and f"". */ |
| int saw_b = 0, saw_r = 0, saw_u = 0, saw_f = 0; |
| while (1) { |
| if (!(saw_b || saw_u || saw_f) && (c == 'b' || c == 'B')) |
| saw_b = 1; |
| /* Since this is a backwards compatibility support literal we don't |
| want to support it in arbitrary order like byte literals. */ |
| else if (!(saw_b || saw_u || saw_r || saw_f) |
| && (c == 'u'|| c == 'U')) { |
| saw_u = 1; |
| } |
| /* ur"" and ru"" are not supported */ |
| else if (!(saw_r || saw_u) && (c == 'r' || c == 'R')) { |
| saw_r = 1; |
| } |
| else if (!(saw_f || saw_b || saw_u) && (c == 'f' || c == 'F')) { |
| saw_f = 1; |
| } |
| else { |
| break; |
| } |
| c = tok_nextc(tok); |
| if (c == '"' || c == '\'') { |
| if (saw_f) { |
| goto f_string_quote; |
| } |
| goto letter_quote; |
| } |
| } |
| while (is_potential_identifier_char(c)) { |
| if (c >= 128) { |
| nonascii = 1; |
| } |
| c = tok_nextc(tok); |
| } |
| tok_backup(tok, c); |
| if (nonascii && !verify_identifier(tok)) { |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| |
| p_start = tok->start; |
| p_end = tok->cur; |
| |
| /* async/await parsing block. */ |
| if (tok->cur - tok->start == 5 && tok->start[0] == 'a') { |
| /* May be an 'async' or 'await' token. For Python 3.7 or |
| later we recognize them unconditionally. For Python |
| 3.5 or 3.6 we recognize 'async' in front of 'def', and |
| either one inside of 'async def'. (Technically we |
| shouldn't recognize these at all for 3.4 or earlier, |
| but there's no *valid* Python 3.4 code that would be |
| rejected, and async functions will be rejected in a |
| later phase.) */ |
| if (!tok->async_hacks || tok->async_def) { |
| /* Always recognize the keywords. */ |
| if (memcmp(tok->start, "async", 5) == 0) { |
| return MAKE_TOKEN(ASYNC); |
| } |
| if (memcmp(tok->start, "await", 5) == 0) { |
| return MAKE_TOKEN(AWAIT); |
| } |
| } |
| else if (memcmp(tok->start, "async", 5) == 0) { |
| /* The current token is 'async'. |
| Look ahead one token to see if that is 'def'. */ |
| |
| struct tok_state ahead_tok; |
| struct token ahead_token; |
| _PyToken_Init(&ahead_token); |
| int ahead_tok_kind; |
| |
| memcpy(&ahead_tok, tok, sizeof(ahead_tok)); |
| ahead_tok_kind = tok_get_normal_mode(&ahead_tok, |
| current_tok, |
| &ahead_token); |
| |
| if (ahead_tok_kind == NAME |
| && ahead_tok.cur - ahead_tok.start == 3 |
| && memcmp(ahead_tok.start, "def", 3) == 0) |
| { |
| /* The next token is going to be 'def', so instead of |
| returning a plain NAME token, return ASYNC. */ |
| tok->async_def_indent = tok->indent; |
| tok->async_def = 1; |
| _PyToken_Free(&ahead_token); |
| return MAKE_TOKEN(ASYNC); |
| } |
| _PyToken_Free(&ahead_token); |
| } |
| } |
| |
| return MAKE_TOKEN(NAME); |
| } |
| |
| /* Newline */ |
| if (c == '\n') { |
| tok->atbol = 1; |
| if (blankline || tok->level > 0) { |
| if (tok->tok_extra_tokens) { |
| if (tok->comment_newline) { |
| tok->comment_newline = 0; |
| } |
| p_start = tok->start; |
| p_end = tok->cur; |
| return MAKE_TOKEN(NL); |
| } |
| goto nextline; |
| } |
| if (tok->comment_newline && tok->tok_extra_tokens) { |
| tok->comment_newline = 0; |
| p_start = tok->start; |
| p_end = tok->cur; |
| return MAKE_TOKEN(NL); |
| } |
| p_start = tok->start; |
| p_end = tok->cur - 1; /* Leave '\n' out of the string */ |
| tok->cont_line = 0; |
| if (tok->async_def) { |
| /* We're somewhere inside an 'async def' function, and |
| we've encountered a NEWLINE after its signature. */ |
| tok->async_def_nl = 1; |
| } |
| return MAKE_TOKEN(NEWLINE); |
| } |
| |
| /* Period or number starting with period? */ |
| if (c == '.') { |
| c = tok_nextc(tok); |
| if (isdigit(c)) { |
| goto fraction; |
| } else if (c == '.') { |
| c = tok_nextc(tok); |
| if (c == '.') { |
| p_start = tok->start; |
| p_end = tok->cur; |
| return MAKE_TOKEN(ELLIPSIS); |
| } |
| else { |
| tok_backup(tok, c); |
| } |
| tok_backup(tok, '.'); |
| } |
| else { |
| tok_backup(tok, c); |
| } |
| p_start = tok->start; |
| p_end = tok->cur; |
| return MAKE_TOKEN(DOT); |
| } |
| |
| /* Number */ |
| if (isdigit(c)) { |
| if (c == '0') { |
| /* Hex, octal or binary -- maybe. */ |
| c = tok_nextc(tok); |
| if (c == 'x' || c == 'X') { |
| /* Hex */ |
| c = tok_nextc(tok); |
| do { |
| if (c == '_') { |
| c = tok_nextc(tok); |
| } |
| if (!isxdigit(c)) { |
| tok_backup(tok, c); |
| return MAKE_TOKEN(syntaxerror(tok, "invalid hexadecimal literal")); |
| } |
| do { |
| c = tok_nextc(tok); |
| } while (isxdigit(c)); |
| } while (c == '_'); |
| if (!verify_end_of_number(tok, c, "hexadecimal")) { |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| } |
| else if (c == 'o' || c == 'O') { |
| /* Octal */ |
| c = tok_nextc(tok); |
| do { |
| if (c == '_') { |
| c = tok_nextc(tok); |
| } |
| if (c < '0' || c >= '8') { |
| if (isdigit(c)) { |
| return MAKE_TOKEN(syntaxerror(tok, |
| "invalid digit '%c' in octal literal", c)); |
| } |
| else { |
| tok_backup(tok, c); |
| return MAKE_TOKEN(syntaxerror(tok, "invalid octal literal")); |
| } |
| } |
| do { |
| c = tok_nextc(tok); |
| } while ('0' <= c && c < '8'); |
| } while (c == '_'); |
| if (isdigit(c)) { |
| return MAKE_TOKEN(syntaxerror(tok, |
| "invalid digit '%c' in octal literal", c)); |
| } |
| if (!verify_end_of_number(tok, c, "octal")) { |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| } |
| else if (c == 'b' || c == 'B') { |
| /* Binary */ |
| c = tok_nextc(tok); |
| do { |
| if (c == '_') { |
| c = tok_nextc(tok); |
| } |
| if (c != '0' && c != '1') { |
| if (isdigit(c)) { |
| return MAKE_TOKEN(syntaxerror(tok, "invalid digit '%c' in binary literal", c)); |
| } |
| else { |
| tok_backup(tok, c); |
| return MAKE_TOKEN(syntaxerror(tok, "invalid binary literal")); |
| } |
| } |
| do { |
| c = tok_nextc(tok); |
| } while (c == '0' || c == '1'); |
| } while (c == '_'); |
| if (isdigit(c)) { |
| return MAKE_TOKEN(syntaxerror(tok, "invalid digit '%c' in binary literal", c)); |
| } |
| if (!verify_end_of_number(tok, c, "binary")) { |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| } |
| else { |
| int nonzero = 0; |
| /* maybe old-style octal; c is first char of it */ |
| /* in any case, allow '0' as a literal */ |
| while (1) { |
| if (c == '_') { |
| c = tok_nextc(tok); |
| if (!isdigit(c)) { |
| tok_backup(tok, c); |
| return MAKE_TOKEN(syntaxerror(tok, "invalid decimal literal")); |
| } |
| } |
| if (c != '0') { |
| break; |
| } |
| c = tok_nextc(tok); |
| } |
| char* zeros_end = tok->cur; |
| if (isdigit(c)) { |
| nonzero = 1; |
| c = tok_decimal_tail(tok); |
| if (c == 0) { |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| } |
| if (c == '.') { |
| c = tok_nextc(tok); |
| goto fraction; |
| } |
| else if (c == 'e' || c == 'E') { |
| goto exponent; |
| } |
| else if (c == 'j' || c == 'J') { |
| goto imaginary; |
| } |
| else if (nonzero) { |
| /* Old-style octal: now disallowed. */ |
| tok_backup(tok, c); |
| return MAKE_TOKEN(syntaxerror_known_range( |
| tok, (int)(tok->start + 1 - tok->line_start), |
| (int)(zeros_end - tok->line_start), |
| "leading zeros in decimal integer " |
| "literals are not permitted; " |
| "use an 0o prefix for octal integers")); |
| } |
| if (!verify_end_of_number(tok, c, "decimal")) { |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| } |
| } |
| else { |
| /* Decimal */ |
| c = tok_decimal_tail(tok); |
| if (c == 0) { |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| { |
| /* Accept floating point numbers. */ |
| if (c == '.') { |
| c = tok_nextc(tok); |
| fraction: |
| /* Fraction */ |
| if (isdigit(c)) { |
| c = tok_decimal_tail(tok); |
| if (c == 0) { |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| } |
| } |
| if (c == 'e' || c == 'E') { |
| int e; |
| exponent: |
| e = c; |
| /* Exponent part */ |
| c = tok_nextc(tok); |
| if (c == '+' || c == '-') { |
| c = tok_nextc(tok); |
| if (!isdigit(c)) { |
| tok_backup(tok, c); |
| return MAKE_TOKEN(syntaxerror(tok, "invalid decimal literal")); |
| } |
| } else if (!isdigit(c)) { |
| tok_backup(tok, c); |
| if (!verify_end_of_number(tok, e, "decimal")) { |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| tok_backup(tok, e); |
| p_start = tok->start; |
| p_end = tok->cur; |
| return MAKE_TOKEN(NUMBER); |
| } |
| c = tok_decimal_tail(tok); |
| if (c == 0) { |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| } |
| if (c == 'j' || c == 'J') { |
| /* Imaginary part */ |
| imaginary: |
| c = tok_nextc(tok); |
| if (!verify_end_of_number(tok, c, "imaginary")) { |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| } |
| else if (!verify_end_of_number(tok, c, "decimal")) { |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| } |
| } |
| tok_backup(tok, c); |
| p_start = tok->start; |
| p_end = tok->cur; |
| return MAKE_TOKEN(NUMBER); |
| } |
| |
| f_string_quote: |
| if (((tolower(*tok->start) == 'f' || tolower(*tok->start) == 'r') && (c == '\'' || c == '"'))) { |
| int quote = c; |
| int quote_size = 1; /* 1 or 3 */ |
| |
| /* Nodes of type STRING, especially multi line strings |
| must be handled differently in order to get both |
| the starting line number and the column offset right. |
| (cf. issue 16806) */ |
| tok->first_lineno = tok->lineno; |
| tok->multi_line_start = tok->line_start; |
| |
| /* Find the quote size and start of string */ |
| int after_quote = tok_nextc(tok); |
| if (after_quote == quote) { |
| int after_after_quote = tok_nextc(tok); |
| if (after_after_quote == quote) { |
| quote_size = 3; |
| } |
| else { |
| // TODO: Check this |
| tok_backup(tok, after_after_quote); |
| tok_backup(tok, after_quote); |
| } |
| } |
| if (after_quote != quote) { |
| tok_backup(tok, after_quote); |
| } |
| |
| |
| p_start = tok->start; |
| p_end = tok->cur; |
| if (tok->tok_mode_stack_index + 1 >= MAXFSTRINGLEVEL) { |
| return MAKE_TOKEN(syntaxerror(tok, "too many nested f-strings")); |
| } |
| tokenizer_mode *the_current_tok = TOK_NEXT_MODE(tok); |
| the_current_tok->kind = TOK_FSTRING_MODE; |
| the_current_tok->f_string_quote = quote; |
| the_current_tok->f_string_quote_size = quote_size; |
| the_current_tok->f_string_start = tok->start; |
| the_current_tok->f_string_multi_line_start = tok->line_start; |
| the_current_tok->f_string_line_start = tok->lineno; |
| the_current_tok->f_string_start_offset = -1; |
| the_current_tok->f_string_multi_line_start_offset = -1; |
| the_current_tok->last_expr_buffer = NULL; |
| the_current_tok->last_expr_size = 0; |
| the_current_tok->last_expr_end = -1; |
| the_current_tok->f_string_debug = 0; |
| |
| switch (*tok->start) { |
| case 'F': |
| case 'f': |
| the_current_tok->f_string_raw = tolower(*(tok->start + 1)) == 'r'; |
| break; |
| case 'R': |
| case 'r': |
| the_current_tok->f_string_raw = 1; |
| break; |
| default: |
| Py_UNREACHABLE(); |
| } |
| |
| the_current_tok->curly_bracket_depth = 0; |
| the_current_tok->curly_bracket_expr_start_depth = -1; |
| return MAKE_TOKEN(FSTRING_START); |
| } |
| |
| letter_quote: |
| /* String */ |
| if (c == '\'' || c == '"') { |
| int quote = c; |
| int quote_size = 1; /* 1 or 3 */ |
| int end_quote_size = 0; |
| |
| /* Nodes of type STRING, especially multi line strings |
| must be handled differently in order to get both |
| the starting line number and the column offset right. |
| (cf. issue 16806) */ |
| tok->first_lineno = tok->lineno; |
| tok->multi_line_start = tok->line_start; |
| |
| /* Find the quote size and start of string */ |
| c = tok_nextc(tok); |
| if (c == quote) { |
| c = tok_nextc(tok); |
| if (c == quote) { |
| quote_size = 3; |
| } |
| else { |
| end_quote_size = 1; /* empty string found */ |
| } |
| } |
| if (c != quote) { |
| tok_backup(tok, c); |
| } |
| |
| /* Get rest of string */ |
| while (end_quote_size != quote_size) { |
| c = tok_nextc(tok); |
| if (tok->done == E_ERROR) { |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| if (tok->done == E_DECODE) { |
| break; |
| } |
| if (c == EOF || (quote_size == 1 && c == '\n')) { |
| assert(tok->multi_line_start != NULL); |
| // shift the tok_state's location into |
| // the start of string, and report the error |
| // from the initial quote character |
| tok->cur = (char *)tok->start; |
| tok->cur++; |
| tok->line_start = tok->multi_line_start; |
| int start = tok->lineno; |
| tok->lineno = tok->first_lineno; |
| |
| if (INSIDE_FSTRING(tok)) { |
| /* When we are in an f-string, before raising the |
| * unterminated string literal error, check whether |
| * does the initial quote matches with f-strings quotes |
| * and if it is, then this must be a missing '}' token |
| * so raise the proper error */ |
| tokenizer_mode *the_current_tok = TOK_GET_MODE(tok); |
| if (the_current_tok->f_string_quote == quote && |
| the_current_tok->f_string_quote_size == quote_size) { |
| return MAKE_TOKEN(syntaxerror(tok, "f-string: expecting '}'", start)); |
| } |
| } |
| |
| if (quote_size == 3) { |
| syntaxerror(tok, "unterminated triple-quoted string literal" |
| " (detected at line %d)", start); |
| if (c != '\n') { |
| tok->done = E_EOFS; |
| } |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| else { |
| syntaxerror(tok, "unterminated string literal (detected at" |
| " line %d)", start); |
| if (c != '\n') { |
| tok->done = E_EOLS; |
| } |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| } |
| if (c == quote) { |
| end_quote_size += 1; |
| } |
| else { |
| end_quote_size = 0; |
| if (c == '\\') { |
| tok_nextc(tok); /* skip escaped char */ |
| } |
| } |
| } |
| |
| p_start = tok->start; |
| p_end = tok->cur; |
| return MAKE_TOKEN(STRING); |
| } |
| |
| /* Line continuation */ |
| if (c == '\\') { |
| if ((c = tok_continuation_line(tok)) == -1) { |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| tok->cont_line = 1; |
| goto again; /* Read next line */ |
| } |
| |
| /* Punctuation character */ |
| int is_punctuation = (c == ':' || c == '}' || c == '!' || c == '{'); |
| if (is_punctuation && INSIDE_FSTRING(tok) && INSIDE_FSTRING_EXPR(current_tok)) { |
| /* This code block gets executed before the curly_bracket_depth is incremented |
| * by the `{` case, so for ensuring that we are on the 0th level, we need |
| * to adjust it manually */ |
| int cursor = current_tok->curly_bracket_depth - (c != '{'); |
| if (cursor == 0 && !update_fstring_expr(tok, c)) { |
| return MAKE_TOKEN(ENDMARKER); |
| } |
| if (cursor == 0 && c != '{' && set_fstring_expr(tok, token, c)) { |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| |
| if (c == ':' && cursor == current_tok->curly_bracket_expr_start_depth) { |
| current_tok->kind = TOK_FSTRING_MODE; |
| p_start = tok->start; |
| p_end = tok->cur; |
| return MAKE_TOKEN(_PyToken_OneChar(c)); |
| } |
| } |
| |
| /* Check for two-character token */ |
| { |
| int c2 = tok_nextc(tok); |
| int current_token = _PyToken_TwoChars(c, c2); |
| if (current_token != OP) { |
| int c3 = tok_nextc(tok); |
| int current_token3 = _PyToken_ThreeChars(c, c2, c3); |
| if (current_token3 != OP) { |
| current_token = current_token3; |
| } |
| else { |
| tok_backup(tok, c3); |
| } |
| p_start = tok->start; |
| p_end = tok->cur; |
| return MAKE_TOKEN(current_token); |
| } |
| tok_backup(tok, c2); |
| } |
| |
| /* Keep track of parentheses nesting level */ |
| switch (c) { |
| case '(': |
| case '[': |
| case '{': |
| if (tok->level >= MAXLEVEL) { |
| return MAKE_TOKEN(syntaxerror(tok, "too many nested parentheses")); |
| } |
| tok->parenstack[tok->level] = c; |
| tok->parenlinenostack[tok->level] = tok->lineno; |
| tok->parencolstack[tok->level] = (int)(tok->start - tok->line_start); |
| tok->level++; |
| if (INSIDE_FSTRING(tok)) { |
| current_tok->curly_bracket_depth++; |
| } |
| break; |
| case ')': |
| case ']': |
| case '}': |
| if (!tok->level) { |
| if (INSIDE_FSTRING(tok) && !current_tok->curly_bracket_depth && c == '}') { |
| return MAKE_TOKEN(syntaxerror(tok, "f-string: single '}' is not allowed")); |
| } |
| return MAKE_TOKEN(syntaxerror(tok, "unmatched '%c'", c)); |
| } |
| tok->level--; |
| int opening = tok->parenstack[tok->level]; |
| if (!((opening == '(' && c == ')') || |
| (opening == '[' && c == ']') || |
| (opening == '{' && c == '}'))) |
| { |
| /* If the opening bracket belongs to an f-string's expression |
| part (e.g. f"{)}") and the closing bracket is an arbitrary |
| nested expression, then instead of matching a different |
| syntactical construct with it; we'll throw an unmatched |
| parentheses error. */ |
| if (INSIDE_FSTRING(tok) && opening == '{') { |
| assert(current_tok->curly_bracket_depth >= 0); |
| int previous_bracket = current_tok->curly_bracket_depth - 1; |
| if (previous_bracket == current_tok->curly_bracket_expr_start_depth) { |
| return MAKE_TOKEN(syntaxerror(tok, "f-string: unmatched '%c'", c)); |
| } |
| } |
| if (tok->parenlinenostack[tok->level] != tok->lineno) { |
| return MAKE_TOKEN(syntaxerror(tok, |
| "closing parenthesis '%c' does not match " |
| "opening parenthesis '%c' on line %d", |
| c, opening, tok->parenlinenostack[tok->level])); |
| } |
| else { |
| return MAKE_TOKEN(syntaxerror(tok, |
| "closing parenthesis '%c' does not match " |
| "opening parenthesis '%c'", |
| c, opening)); |
| } |
| } |
| |
| if (INSIDE_FSTRING(tok)) { |
| current_tok->curly_bracket_depth--; |
| if (c == '}' && current_tok->curly_bracket_depth == current_tok->curly_bracket_expr_start_depth) { |
| current_tok->curly_bracket_expr_start_depth--; |
| current_tok->kind = TOK_FSTRING_MODE; |
| current_tok->f_string_debug = 0; |
| } |
| } |
| break; |
| default: |
| break; |
| } |
| |
| if (!Py_UNICODE_ISPRINTABLE(c)) { |
| return MAKE_TOKEN(syntaxerror(tok, "invalid non-printable character U+%04X", c)); |
| } |
| |
| if( c == '=' && INSIDE_FSTRING_EXPR(current_tok)) { |
| current_tok->f_string_debug = 1; |
| } |
| |
| /* Punctuation character */ |
| p_start = tok->start; |
| p_end = tok->cur; |
| return MAKE_TOKEN(_PyToken_OneChar(c)); |
| } |
| |
| static int |
| tok_get_fstring_mode(struct tok_state *tok, tokenizer_mode* current_tok, struct token *token) |
| { |
| const char *p_start = NULL; |
| const char *p_end = NULL; |
| int end_quote_size = 0; |
| int unicode_escape = 0; |
| |
| tok->start = tok->cur; |
| tok->first_lineno = tok->lineno; |
| tok->starting_col_offset = tok->col_offset; |
| |
| // If we start with a bracket, we defer to the normal mode as there is nothing for us to tokenize |
| // before it. |
| int start_char = tok_nextc(tok); |
| if (start_char == '{') { |
| int peek1 = tok_nextc(tok); |
| tok_backup(tok, peek1); |
| tok_backup(tok, start_char); |
| if (peek1 != '{') { |
| current_tok->curly_bracket_expr_start_depth++; |
| if (current_tok->curly_bracket_expr_start_depth >= MAX_EXPR_NESTING) { |
| return MAKE_TOKEN(syntaxerror(tok, "f-string: expressions nested too deeply")); |
| } |
| TOK_GET_MODE(tok)->kind = TOK_REGULAR_MODE; |
| return tok_get_normal_mode(tok, current_tok, token); |
| } |
| } |
| else { |
| tok_backup(tok, start_char); |
| } |
| |
| // Check if we are at the end of the string |
| for (int i = 0; i < current_tok->f_string_quote_size; i++) { |
| int quote = tok_nextc(tok); |
| if (quote != current_tok->f_string_quote) { |
| tok_backup(tok, quote); |
| goto f_string_middle; |
| } |
| } |
| |
| if (current_tok->last_expr_buffer != NULL) { |
| PyMem_Free(current_tok->last_expr_buffer); |
| current_tok->last_expr_buffer = NULL; |
| current_tok->last_expr_size = 0; |
| current_tok->last_expr_end = -1; |
| } |
| |
| p_start = tok->start; |
| p_end = tok->cur; |
| tok->tok_mode_stack_index--; |
| return MAKE_TOKEN(FSTRING_END); |
| |
| f_string_middle: |
| |
| // TODO: This is a bit of a hack, but it works for now. We need to find a better way to handle |
| // this. |
| tok->multi_line_start = tok->line_start; |
| while (end_quote_size != current_tok->f_string_quote_size) { |
| int c = tok_nextc(tok); |
| if (tok->done == E_ERROR) { |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| if (c == EOF || (current_tok->f_string_quote_size == 1 && c == '\n')) { |
| if (tok->decoding_erred) { |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| |
| assert(tok->multi_line_start != NULL); |
| // shift the tok_state's location into |
| // the start of string, and report the error |
| // from the initial quote character |
| tok->cur = (char *)current_tok->f_string_start; |
| tok->cur++; |
| tok->line_start = current_tok->f_string_multi_line_start; |
| int start = tok->lineno; |
| |
| tokenizer_mode *the_current_tok = TOK_GET_MODE(tok); |
| tok->lineno = the_current_tok->f_string_line_start; |
| |
| if (current_tok->f_string_quote_size == 3) { |
| return MAKE_TOKEN(syntaxerror(tok, |
| "unterminated triple-quoted f-string literal" |
| " (detected at line %d)", start)); |
| } |
| else { |
| return MAKE_TOKEN(syntaxerror(tok, |
| "unterminated f-string literal (detected at" |
| " line %d)", start)); |
| } |
| } |
| |
| if (c == current_tok->f_string_quote) { |
| end_quote_size += 1; |
| continue; |
| } else { |
| end_quote_size = 0; |
| } |
| |
| int in_format_spec = ( |
| current_tok->last_expr_end != -1 |
| && |
| INSIDE_FSTRING_EXPR(current_tok) |
| ); |
| if (c == '{') { |
| int peek = tok_nextc(tok); |
| if (peek != '{' || in_format_spec) { |
| tok_backup(tok, peek); |
| tok_backup(tok, c); |
| current_tok->curly_bracket_expr_start_depth++; |
| if (current_tok->curly_bracket_expr_start_depth >= MAX_EXPR_NESTING) { |
| return MAKE_TOKEN(syntaxerror(tok, "f-string: expressions nested too deeply")); |
| } |
| TOK_GET_MODE(tok)->kind = TOK_REGULAR_MODE; |
| p_start = tok->start; |
| p_end = tok->cur; |
| } else { |
| p_start = tok->start; |
| p_end = tok->cur - 1; |
| } |
| return MAKE_TOKEN(FSTRING_MIDDLE); |
| } else if (c == '}') { |
| if (unicode_escape) { |
| p_start = tok->start; |
| p_end = tok->cur; |
| return MAKE_TOKEN(FSTRING_MIDDLE); |
| } |
| int peek = tok_nextc(tok); |
| |
| // The tokenizer can only be in the format spec if we have already completed the expression |
| // scanning (indicated by the end of the expression being set) and we are not at the top level |
| // of the bracket stack (-1 is the top level). Since format specifiers can't legally use double |
| // brackets, we can bypass it here. |
| if (peek == '}' && !in_format_spec) { |
| p_start = tok->start; |
| p_end = tok->cur - 1; |
| } else { |
| tok_backup(tok, peek); |
| tok_backup(tok, c); |
| TOK_GET_MODE(tok)->kind = TOK_REGULAR_MODE; |
| p_start = tok->start; |
| p_end = tok->cur; |
| } |
| return MAKE_TOKEN(FSTRING_MIDDLE); |
| } else if (c == '\\') { |
| int peek = tok_nextc(tok); |
| // Special case when the backslash is right before a curly |
| // brace. We have to restore and return the control back |
| // to the loop for the next iteration. |
| if (peek == '{' || peek == '}') { |
| if (!current_tok->f_string_raw) { |
| if (warn_invalid_escape_sequence(tok, peek)) { |
| return MAKE_TOKEN(ERRORTOKEN); |
| } |
| } |
| tok_backup(tok, peek); |
| continue; |
| } |
| |
| if (!current_tok->f_string_raw) { |
| if (peek == 'N') { |
| /* Handle named unicode escapes (\N{BULLET}) */ |
| peek = tok_nextc(tok); |
| if (peek == '{') { |
| unicode_escape = 1; |
| } else { |
| tok_backup(tok, peek); |
| } |
| } |
| } /* else { |
| skip the escaped character |
| }*/ |
| } |
| } |
| |
| // Backup the f-string quotes to emit a final FSTRING_MIDDLE and |
| // add the quotes to the FSTRING_END in the next tokenizer iteration. |
| for (int i = 0; i < current_tok->f_string_quote_size; i++) { |
| tok_backup(tok, current_tok->f_string_quote); |
| } |
| p_start = tok->start; |
| p_end = tok->cur; |
| return MAKE_TOKEN(FSTRING_MIDDLE); |
| } |
| |
| |
| static int |
| tok_get(struct tok_state *tok, struct token *token) |
| { |
| tokenizer_mode *current_tok = TOK_GET_MODE(tok); |
| if (current_tok->kind == TOK_REGULAR_MODE) { |
| return tok_get_normal_mode(tok, current_tok, token); |
| } else { |
| return tok_get_fstring_mode(tok, current_tok, token); |
| } |
| } |
| |
| int |
| _PyTokenizer_Get(struct tok_state *tok, struct token *token) |
| { |
| int result = tok_get(tok, token); |
| if (tok->decoding_erred) { |
| result = ERRORTOKEN; |
| tok->done = E_DECODE; |
| } |
| return result; |
| } |
| |
| #if defined(__wasi__) || (defined(__EMSCRIPTEN__) && (__EMSCRIPTEN_major__ >= 3)) |
| // fdopen() with borrowed fd. WASI does not provide dup() and Emscripten's |
| // dup() emulation with open() is slow. |
| typedef union { |
| void *cookie; |
| int fd; |
| } borrowed; |
| |
| static ssize_t |
| borrow_read(void *cookie, char *buf, size_t size) |
| { |
| borrowed b = {.cookie = cookie}; |
| return read(b.fd, (void *)buf, size); |
| } |
| |
| static FILE * |
| fdopen_borrow(int fd) { |
| // supports only reading. seek fails. close and write are no-ops. |
| cookie_io_functions_t io_cb = {borrow_read, NULL, NULL, NULL}; |
| borrowed b = {.fd = fd}; |
| return fopencookie(b.cookie, "r", io_cb); |
| } |
| #else |
| static FILE * |
| fdopen_borrow(int fd) { |
| fd = _Py_dup(fd); |
| if (fd < 0) { |
| return NULL; |
| } |
| return fdopen(fd, "r"); |
| } |
| #endif |
| |
| /* Get the encoding of a Python file. Check for the coding cookie and check if |
| the file starts with a BOM. |
| |
| _PyTokenizer_FindEncodingFilename() returns NULL when it can't find the |
| encoding in the first or second line of the file (in which case the encoding |
| should be assumed to be UTF-8). |
| |
| The char* returned is malloc'ed via PyMem_Malloc() and thus must be freed |
| by the caller. */ |
| |
| char * |
| _PyTokenizer_FindEncodingFilename(int fd, PyObject *filename) |
| { |
| struct tok_state *tok; |
| FILE *fp; |
| char *encoding = NULL; |
| |
| fp = fdopen_borrow(fd); |
| if (fp == NULL) { |
| return NULL; |
| } |
| tok = _PyTokenizer_FromFile(fp, NULL, NULL, NULL); |
| if (tok == NULL) { |
| fclose(fp); |
| return NULL; |
| } |
| if (filename != NULL) { |
| tok->filename = Py_NewRef(filename); |
| } |
| else { |
| tok->filename = PyUnicode_FromString("<string>"); |
| if (tok->filename == NULL) { |
| fclose(fp); |
| _PyTokenizer_Free(tok); |
| return encoding; |
| } |