Doc/library/zipfile.rst

:mod:`!zipfile` --- Work with ZIP archives
==========================================

.. module:: zipfile
   :synopsis: Read and write ZIP-format archive files.

**Source code:** :source:`Lib/zipfile/`

--------------

The ZIP file format is a common archive and compression standard. This module
provides tools to create, read, write, append, and list a ZIP file.  Any
advanced use of this module will require an understanding of the format, as
defined in `PKZIP Application Note`_.

This module does not handle multipart ZIP files.
It can handle ZIP files that use the ZIP64 extensions
(that is ZIP files that are more than 4 GiB in size).  It supports
decryption of encrypted files in ZIP archives, but it cannot
create an encrypted file.  Decryption is extremely slow as it is
implemented in native Python rather than C.

..
   The following paragraph should be similar to ../includes/optional-module.rst

Handling compressed archives requires :term:`optional modules <optional module>`
such as :mod:`zlib`, :mod:`bz2`, :mod:`lzma`, and :mod:`compression.zstd`.
If any of them are missing from your copy of CPython,
look for documentation from your distributor (that is,
whoever provided Python to you).
If you are the distributor, see :ref:`optional-module-requirements`.

The module defines the following items:

.. exception:: BadZipFile

   The error raised for bad ZIP files.

   .. versionadded:: 3.2


.. exception:: BadZipfile

   Alias of :exc:`BadZipFile`, for compatibility with older Python versions.

   .. deprecated:: 3.2


.. exception:: LargeZipFile

   The error raised when a ZIP file would require ZIP64 functionality but that has
   not been enabled.


.. class:: ZipFile
   :noindex:

   The class for reading and writing ZIP files.  See section
   :ref:`zipfile-objects` for constructor details.


.. class:: Path
   :noindex:

   Class that implements a subset of the interface provided by
   :class:`pathlib.Path`, including the full
   :class:`importlib.resources.abc.Traversable` interface.

   .. versionadded:: 3.8


.. class:: PyZipFile
   :noindex:

   Class for creating ZIP archives containing Python libraries.


.. class:: ZipInfo(filename='NoName', date_time=(1980,1,1,0,0,0))

   Class used to represent information about a member of an archive. Instances
   of this class are returned by the :meth:`.getinfo` and :meth:`.infolist`
   methods of :class:`ZipFile` objects.  Most users of the :mod:`!zipfile` module
   will not need to create these, but only use those created by this
   module. *filename* should be the full name of the archive member, and
   *date_time* should be a tuple containing six fields which describe the time
   of the last modification to the file; the fields are described in section
   :ref:`zipinfo-objects`.

   .. versionchanged:: 3.13
      A public :attr:`!compress_level` attribute has been added to expose the
      formerly protected :attr:`!_compresslevel`.  The older protected name
      continues to work as a property for backwards compatibility.


   .. method:: _for_archive(archive)

      Resolve the date_time, compression attributes, and external attributes
      to suitable defaults as used by :meth:`ZipFile.writestr`.

      Returns self for chaining.

      .. versionadded:: 3.14


.. function:: is_zipfile(filename)

   Returns ``True`` if *filename* is a valid ZIP file based on its magic number,
   otherwise returns ``False``.  *filename* may be a file or file-like object too.

   .. versionchanged:: 3.1
      Support for file and file-like objects.


.. data:: ZIP_STORED

   The numeric constant for an uncompressed archive member.


.. data:: ZIP_DEFLATED

   The numeric constant for the usual ZIP compression method.  This requires the
   :mod:`zlib` module.


.. data:: ZIP_BZIP2

   The numeric constant for the BZIP2 compression method.  This requires the
   :mod:`bz2` module.

   .. versionadded:: 3.3

.. data:: ZIP_LZMA

   The numeric constant for the LZMA compression method.  This requires the
   :mod:`lzma` module.

   .. versionadded:: 3.3

.. data:: ZIP_ZSTANDARD

   The numeric constant for Zstandard compression. This requires the
   :mod:`compression.zstd` module.

   .. note::

      In APPNOTE 6.3.7, the method ID ``20`` was assigned to Zstandard
      compression. This was changed in APPNOTE 6.3.8 to method ID ``93`` to
      avoid conflicts, with method ID ``20`` being deprecated. For
      compatibility, the :mod:`!zipfile` module reads both method IDs but will
      only write data with method ID ``93``.

   .. versionadded:: 3.14

.. note::

   The ZIP file format specification has included support for bzip2 compression
   since 2001, for LZMA compression since 2006, and Zstandard compression since
   2020. However, some tools (including older Python releases) do not support
   these compression methods, and may either refuse to process the ZIP file
   altogether, or fail to extract individual files.

.. seealso::

   `PKZIP Application Note`_
      Documentation on the ZIP file format by Phil Katz, the creator of the format and
      algorithms used.

   `Info-ZIP Home Page <https://infozip.sourceforge.net/>`_
      Information about the Info-ZIP project's ZIP archive programs and development
      libraries.


.. _zipfile-objects:

ZipFile objects
---------------


.. class:: ZipFile(file, mode='r', compression=ZIP_STORED, allowZip64=True, \
                   compresslevel=None, *, strict_timestamps=True, \
                   metadata_encoding=None)

   Open a ZIP file, where *file* can be a path to a file (a string), a
   file-like object or a :term:`path-like object`.

   The *mode* parameter should be ``'r'`` to read an existing
   file, ``'w'`` to truncate and write a new file, ``'a'`` to append to an
   existing file, or ``'x'`` to exclusively create and write a new file.
   If *mode* is ``'x'`` and *file* refers to an existing file,
   a :exc:`FileExistsError` will be raised.
   If *mode* is ``'a'`` and *file* refers to an existing ZIP
   file, then additional files are added to it.  If *file* does not refer to a
   ZIP file, then a new ZIP archive is appended to the file.  This is meant for
   adding a ZIP archive to another file (such as :file:`python.exe`).  If
   *mode* is ``'a'`` and the file does not exist at all, it is created.
   If *mode* is ``'r'`` or ``'a'``, the file should be seekable.

   *compression* is the ZIP compression method to use when writing the archive,
   and should be :const:`ZIP_STORED`, :const:`ZIP_DEFLATED`,
   :const:`ZIP_BZIP2`, :const:`ZIP_LZMA`, or :const:`ZIP_ZSTANDARD`;
   unrecognized values will cause :exc:`NotImplementedError` to be raised.  If
   :const:`ZIP_DEFLATED`, :const:`ZIP_BZIP2`, :const:`ZIP_LZMA`, or
   :const:`ZIP_ZSTANDARD` is specified but the corresponding module
   (:mod:`zlib`, :mod:`bz2`, :mod:`lzma`, or :mod:`compression.zstd`) is not
   available, :exc:`RuntimeError` is raised. The default is :const:`ZIP_STORED`.

   If *allowZip64* is ``True`` (the default) zipfile will create ZIP files that
   use the ZIP64 extensions when the zipfile is larger than 4 GiB. If it is
   ``false`` :mod:`!zipfile` will raise an exception when the ZIP file would
   require ZIP64 extensions.

   The *compresslevel* parameter controls the compression level to use when
   writing files to the archive.
   When using :const:`ZIP_STORED` or :const:`ZIP_LZMA` it has no effect.
   When using :const:`ZIP_DEFLATED` integers ``0`` through ``9`` are accepted
   (see :class:`zlib <zlib.compressobj>` for more information).
   When using :const:`ZIP_BZIP2` integers ``1`` through ``9`` are accepted
   (see :class:`bz2 <bz2.BZ2File>` for more information).
   When using :const:`ZIP_ZSTANDARD` integers ``-131072`` through ``22`` are
   commonly accepted (see
   :attr:`CompressionParameter.compression_level <compression.zstd.CompressionParameter.compression_level>`
   for more on retrieving valid values and their meaning).

   The *strict_timestamps* argument, when set to ``False``, allows to
   zip files older than 1980-01-01 at the cost of setting the
   timestamp to 1980-01-01.
   Similar behavior occurs with files newer than 2107-12-31,
   the timestamp is also set to the limit.

   When mode is ``'r'``, *metadata_encoding* may be set to the name of a codec,
   which will be used to decode metadata such as the names of members and ZIP
   comments.

   If the file is created with mode ``'w'``, ``'x'`` or ``'a'`` and then
   :meth:`closed <close>` without adding any files to the archive, the appropriate
   ZIP structures for an empty archive will be written to the file.

   ZipFile is also a context manager and therefore supports the
   :keyword:`with` statement.  In the example, *myzip* is closed after the
   :keyword:`!with` statement's suite is finished---even if an exception occurs::

      with ZipFile('spam.zip', 'w') as myzip:
          myzip.write('eggs.txt')

   .. note::

      *metadata_encoding* is an instance-wide setting for the ZipFile.
      It is not possible to set this on a per-member basis.

      This attribute is a workaround for legacy implementations which produce
      archives with names in the current locale encoding or code page (mostly
      on Windows).  According to the .ZIP standard, the encoding of metadata
      may be specified to be either IBM code page (default) or UTF-8 by a flag
      in the archive header.
      That flag takes precedence over *metadata_encoding*, which is
      a Python-specific extension.

   .. versionchanged:: 3.2
      Added the ability to use :class:`ZipFile` as a context manager.

   .. versionchanged:: 3.3
      Added support for :mod:`bzip2 <bz2>` and :mod:`lzma` compression.

   .. versionchanged:: 3.4
      ZIP64 extensions are enabled by default.

   .. versionchanged:: 3.5
      Added support for writing to unseekable streams.
      Added support for the ``'x'`` mode.

   .. versionchanged:: 3.6
      Previously, a plain :exc:`RuntimeError` was raised for unrecognized
      compression values.

   .. versionchanged:: 3.6.2
      The *file* parameter accepts a :term:`path-like object`.

   .. versionchanged:: 3.7
      Add the *compresslevel* parameter.

   .. versionchanged:: 3.8
      The *strict_timestamps* keyword-only parameter.

   .. versionchanged:: 3.11
      Added support for specifying member name encoding for reading
      metadata in the zipfile's directory and file headers.

   .. versionchanged:: 3.16
      Deleting a writable, open :class:`zipfile.ZipFile` now emits a
      :exc:`ResourceWarning`. Use as a :term:`context manager` or call
      :meth:`~zipfile.ZipFile.close` explicitly.

.. method:: ZipFile.close()

   Close the archive file.  You must call :meth:`close` before exiting your program
   or essential records will not be written.


.. method:: ZipFile.getinfo(name)

   Return a :class:`ZipInfo` object with information about the archive member
   *name*.  Calling :meth:`getinfo` for a name not currently contained in the
   archive will raise a :exc:`KeyError`.


.. method:: ZipFile.infolist()

   Return a list containing a :class:`ZipInfo` object for each member of the
   archive.  The objects are in the same order as their entries in the actual ZIP
   file on disk if an existing archive was opened.


.. method:: ZipFile.namelist()

   Return a list of archive members by name.


.. method:: ZipFile.open(name, mode='r', pwd=None, *, force_zip64=False)

   Access a member of the archive as a binary file-like object.  *name*
   can be either the name of a file within the archive or a :class:`ZipInfo`
   object.  The *mode* parameter, if included, must be ``'r'`` (the default)
   or ``'w'``.  *pwd* is the password used to decrypt encrypted ZIP files as a
   :class:`bytes` object.

   :meth:`~ZipFile.open` is also a context manager and therefore supports the
   :keyword:`with` statement::

      with ZipFile('spam.zip') as myzip:
          with myzip.open('eggs.txt') as myfile:
              print(myfile.read())

   With *mode* ``'r'`` the file-like object
   (``ZipExtFile``) is read-only and provides the following methods:
   :meth:`~io.BufferedIOBase.read`, :meth:`~io.IOBase.readline`,
   :meth:`~io.IOBase.readlines`, :meth:`~io.IOBase.seek`,
   :meth:`~io.IOBase.tell`, :meth:`~container.__iter__`, :meth:`~iterator.__next__`.
   These objects can operate independently of the ZipFile.

   With ``mode='w'``, a writable file handle is returned, which supports the
   :meth:`~io.BufferedIOBase.write` method.  While a writable file handle is open,
   attempting to read or write other files in the ZIP file will raise a
   :exc:`ValueError`.

   In both cases the file-like object has also attributes :attr:`!name`,
   which is equivalent to the name of a file within the archive, and
   :attr:`!mode`, which is ``'rb'`` or ``'wb'`` depending on the input mode.

   When writing a file, if the file size is not known in advance but may exceed
   2 GiB, pass ``force_zip64=True`` to ensure that the header format is
   capable of supporting large files.  If the file size is known in advance,
   construct a :class:`ZipInfo` object with :attr:`~ZipInfo.file_size` set, and
   use that as the *name* parameter.

   .. note::

      The :meth:`.open`, :meth:`read` and :meth:`extract` methods can take a filename
      or a :class:`ZipInfo` object.  You will appreciate this when trying to read a
      ZIP file that contains members with duplicate names.

   .. versionchanged:: 3.6
      Removed support of ``mode='U'``.  Use :class:`io.TextIOWrapper` for reading
      compressed text files in :term:`universal newlines` mode.

   .. versionchanged:: 3.6
      :meth:`ZipFile.open` can now be used to write files into the archive with the
      ``mode='w'`` option.

   .. versionchanged:: 3.6
      Calling :meth:`.open` on a closed ZipFile will raise a :exc:`ValueError`.
      Previously, a :exc:`RuntimeError` was raised.

   .. versionchanged:: 3.13
      Added attributes :attr:`!name` and :attr:`!mode` for the writeable
      file-like object.
      The value of the :attr:`!mode` attribute for the readable file-like
      object was changed from ``'r'`` to ``'rb'``.


.. method:: ZipFile.extract(member, path=None, pwd=None)

   Extract a member from the archive to the current working directory; *member*
   must be its full name or a :class:`ZipInfo` object.  Its file information is
   extracted as accurately as possible.  *path* specifies a different directory
   to extract to.  *member* can be a filename or a :class:`ZipInfo` object.
   *pwd* is the password used for encrypted files as a :class:`bytes` object.

   Returns the normalized path created (a directory or new file).

   .. note::

      If a member filename is an absolute path, a drive/UNC sharepoint and
      leading (back)slashes will be stripped, e.g.: ``///foo/bar`` becomes
      ``foo/bar`` on Unix, and ``C:\foo\bar`` becomes ``foo\bar`` on Windows.
      And all ``".."`` components in a member filename will be removed, e.g.:
      ``../../foo../../ba..r`` becomes ``foo../ba..r``.  On Windows illegal
      characters (``:``, ``<``, ``>``, ``|``, ``"``, ``?``, and ``*``)
      replaced by underscore (``_``).

   .. versionchanged:: 3.6
      Calling :meth:`extract` on a closed ZipFile will raise a
      :exc:`ValueError`.  Previously, a :exc:`RuntimeError` was raised.

   .. versionchanged:: 3.6.2
      The *path* parameter accepts a :term:`path-like object`.


.. method:: ZipFile.extractall(path=None, members=None, pwd=None)

   Extract all members from the archive to the current working directory.  *path*
   specifies a different directory to extract to.  *members* is optional and must
   be a subset of the list returned by :meth:`namelist`.  *pwd* is the password
   used for encrypted files as a :class:`bytes` object.

   .. warning::

      Never extract archives from untrusted sources without prior inspection.
      It is possible that files are created outside of *path*, for example, members
      that have absolute filenames or filenames with ".." components.
      This module attempts to prevent that.
      See :meth:`extract` note.

   .. versionchanged:: 3.6
      Calling :meth:`extractall` on a closed ZipFile will raise a
      :exc:`ValueError`.  Previously, a :exc:`RuntimeError` was raised.

   .. versionchanged:: 3.6.2
      The *path* parameter accepts a :term:`path-like object`.


.. method:: ZipFile.printdir()

   Print a table of contents for the archive to ``sys.stdout``.


.. method:: ZipFile.setpassword(pwd)

   Set *pwd* (a :class:`bytes` object) as default password to extract encrypted files.


.. method:: ZipFile.read(name, pwd=None)

   Return the bytes of the file *name* in the archive.  *name* is the name of the
   file in the archive, or a :class:`ZipInfo` object.  The archive must be open for
   read or append. *pwd* is the password used for encrypted files as a :class:`bytes`
   object and, if specified, overrides the default password set with :meth:`setpassword`.
   Calling :meth:`read` on a ZipFile that uses a compression method other than
   :const:`ZIP_STORED`, :const:`ZIP_DEFLATED`, :const:`ZIP_BZIP2`,
   :const:`ZIP_LZMA`, or :const:`ZIP_ZSTANDARD` will raise a
   :exc:`NotImplementedError`. An error will also be raised if the
   corresponding compression module is not available.

   .. versionchanged:: 3.6
      Calling :meth:`read` on a closed ZipFile will raise a :exc:`ValueError`.
      Previously, a :exc:`RuntimeError` was raised.


.. method:: ZipFile.testzip()

   Read all the files in the archive and check their CRC's and file headers.
   Return the name of the first bad file, or else return ``None``.

   .. versionchanged:: 3.6
      Calling :meth:`testzip` on a closed ZipFile will raise a
      :exc:`ValueError`.  Previously, a :exc:`RuntimeError` was raised.


.. method:: ZipFile.write(filename, arcname=None, compress_type=None, \
                          compresslevel=None)

   Write the file named *filename* to the archive, giving it the archive name
   *arcname* (by default, this will be the same as *filename*, but without a drive
   letter and with leading path separators removed).  If given, *compress_type*
   overrides the value given for the *compression* parameter to the constructor for
   the new entry. Similarly, *compresslevel* will override the constructor if
   given.
   The archive must be open with mode ``'w'``, ``'x'`` or ``'a'``.

   .. note::

      The ZIP file standard historically did not specify a metadata encoding,
      but strongly recommended CP437 (the original IBM PC encoding) for
      interoperability.  Recent versions allow use of UTF-8 (only).  In this
      module, UTF-8 will automatically be used to write the member names if
      they contain any non-ASCII characters.  It is not possible to write
      member names in any encoding other than ASCII or UTF-8.

   .. note::

      Archive names should be relative to the archive root, that is, they should not
      start with a path separator.

   .. note::

      If ``arcname`` (or ``filename``, if ``arcname`` is  not given) contains a null
      byte, the name of the file in the archive will be truncated at the null byte.

   .. note::

      A leading slash in the filename may lead to the archive being impossible to
      open in some zip programs on Windows systems.

   .. versionchanged:: 3.6
      Calling :meth:`write` on a ZipFile created with mode ``'r'`` or
      a closed ZipFile will raise a :exc:`ValueError`.  Previously,
      a :exc:`RuntimeError` was raised.


.. method:: ZipFile.writestr(zinfo_or_arcname, data, compress_type=None, \
                             compresslevel=None)

   Write a file into the archive.  The contents is *data*, which may be either
   a :class:`str` or a :class:`bytes` instance; if it is a :class:`str`,
   it is encoded as UTF-8 first.  *zinfo_or_arcname* is either the file
   name it will be given in the archive, or a :class:`ZipInfo` instance.  If it's
   an instance, at least the filename, date, and time must be given.  If it's a
   name, the date and time is set to the current date and time.
   The archive must be opened with mode ``'w'``, ``'x'`` or ``'a'``.

   If given, *compress_type* overrides the value given for the *compression*
   parameter to the constructor for the new entry, or in the *zinfo_or_arcname*
   (if that is a :class:`ZipInfo` instance). Similarly, *compresslevel* will
   override the constructor if given.

   .. note::

      When passing a :class:`ZipInfo` instance as the *zinfo_or_arcname* parameter,
      the compression method used will be that specified in the *compress_type*
      member of the given :class:`ZipInfo` instance.  By default, the
      :class:`ZipInfo` constructor sets this member to :const:`ZIP_STORED`.

   .. versionchanged:: 3.2
      The *compress_type* argument.

   .. versionchanged:: 3.6
      Calling :meth:`writestr` on a ZipFile created with mode ``'r'`` or
      a closed ZipFile will raise a :exc:`ValueError`.  Previously,
      a :exc:`RuntimeError` was raised.

   .. versionchanged:: 3.14
      Now respects the :envvar:`SOURCE_DATE_EPOCH` environment variable.
      If set, it uses this value as the modification timestamp for the file
      written into the ZIP archive, instead of using the current time.

.. method:: ZipFile.mkdir(zinfo_or_directory, mode=511)

   Create a directory inside the archive.  If *zinfo_or_directory* is a string,
   a directory is created inside the archive with the mode that is specified in
   the *mode* argument. If, however, *zinfo_or_directory* is
   a :class:`ZipInfo` instance then the *mode* argument is ignored.

   The archive must be opened with mode ``'w'``, ``'x'`` or ``'a'``.

   .. versionadded:: 3.11


.. method:: ZipFile.remove(zinfo_or_arcname)

   Removes a member entry from the archive's central directory.
   *zinfo_or_arcname* may be the full path of the member or a :class:`ZipInfo`
   instance.  If multiple members share the same full path and the path is
   given as a string, only one of them is removed and which one is unspecified;
   it should not be relied upon.  Pass the specific :class:`ZipInfo` instance to
   remove a particular member.

   The archive must be opened with mode ``'w'``, ``'x'`` or ``'a'``.

   Returns the removed :class:`ZipInfo` instance.

   Calling :meth:`remove` on a closed ZipFile will raise a :exc:`ValueError`.

   .. note::
      This method only removes the member's entry from the central directory,
      making it inaccessible to most tools.  The member's local file entry,
      including content and metadata, remains in the archive and is still
      recoverable using forensic tools.  Call :meth:`repack` afterwards to
      remove the local file entry and reclaim space; pass the returned
      :class:`ZipInfo` to :meth:`repack` to ensure the data is removed
      regardless of how the entry was written.

   .. versionadded:: 3.16


.. method:: ZipFile.repack(removed=None, *, \
                           strict_descriptor=True[, chunk_size])

   Rewrites the archive to remove unreferenced local file entries, shrinking
   its file size.  The archive must be opened with mode ``'a'``, and any file
   object returned by :meth:`ZipFile.open` must be closed first, since
   repacking moves the member data such objects refer to.

   If *removed* is provided, it must be a sequence of :class:`ZipInfo` objects
   representing the recently removed members, and only their corresponding
   local file entries will be removed.  Otherwise, the archive is scanned to
   locate and remove local file entries that are no longer referenced in the
   central directory.

   Passing *removed* is the most reliable way to reclaim space: the
   corresponding local file entries are located directly from the central
   directory and removed regardless of how they were written, whereas the scan
   used when *removed* is omitted may leave some entries in place (see
   *strict_descriptor* below).  To remove members and reclaim their space in a
   single step::

      with ZipFile('spam.zip', 'a') as myzip:
          removed = [myzip.remove(name) for name in ('ham.txt', 'eggs.txt')]
          myzip.repack(removed)

   When scanning, *strict_descriptor* controls how entries written with an
   unsigned *data descriptor* are handled.  A data descriptor is an optional
   record holding an entry's CRC and sizes, stored just after the entry's data;
   it is used when the archive is written to a non-seekable stream, and is
   *signed* when it begins with a marker signature or *unsigned* otherwise.
   Unsigned descriptors have been deprecated by the `PKZIP Application Note`_
   since version 6.3.0 (released in 2006) and are written only by some legacy
   tools; signed descriptors—written by Python and other modern tools—are always
   detected.  When *strict_descriptor* is true (the default), only signed data
   descriptors are detected, so an unreferenced entry written with an unsigned
   descriptor is not located and its space is not reclaimed by the scan.
   Setting ``strict_descriptor=False`` additionally detects unsigned
   descriptors, at the cost of a significantly slower scan—around 100 to 1000
   times in the worst case—which may be exploitable as a denial-of-service
   vector on untrusted input.  This does not affect entries without a data
   descriptor, and is not needed when *removed* is provided.

   *chunk_size* may be specified to control the buffer size when moving
   entry data (default is 1 MiB).

   Calling :meth:`repack` on a closed ZipFile will raise a :exc:`ValueError`.

   .. note::
      The scanning algorithm is heuristic-based and assumes that the ZIP file
      is normally structured—for example, with local file entries stored
      consecutively, without overlap or interleaved binary data.  Prepended
      binary data, such as a self-extractor stub, is recognized and preserved
      unless it happens to contain bytes that coincidentally resemble a valid
      local file entry in multiple respects—an extremely rare case. Embedded
      ZIP payloads are also handled correctly, as long as they follow normal
      structure.  However, the algorithm does not guarantee correctness or
      safety on untrusted or intentionally crafted input.  It is generally
      recommended to provide the *removed* argument for better reliability and
      performance.

   .. versionadded:: 3.16


The following data attributes are also available:

.. attribute:: ZipFile.filename

   Name of the ZIP file.

.. attribute:: ZipFile.debug

   The level of debug output to use.  This may be set from ``0`` (the default, no
   output) to ``3`` (the most output).  Debugging information is written to
   ``sys.stdout``.

.. attribute:: ZipFile.comment

   The comment associated with the ZIP file as a :class:`bytes` object.
   If assigning a comment to a
   :class:`ZipFile` instance created with mode ``'w'``, ``'x'`` or ``'a'``,
   it should be no longer than 65535 bytes.  Comments longer than this will be
   truncated.


.. _path-objects:

Path objects
------------

.. class:: Path(root, at='')

   Construct a Path object from a ``root`` zipfile (which may be a
   :class:`ZipFile` instance or ``file`` suitable for passing to
   the :class:`ZipFile` constructor).

   ``at`` specifies the location of this Path within the zipfile,
   e.g. 'dir/file.txt', 'dir/', or ''. Defaults to the empty string,
   indicating the root.

   .. note::
      The :class:`Path` class does not sanitize filenames within the ZIP archive. Unlike
      the :meth:`ZipFile.extract` and :meth:`ZipFile.extractall` methods, it is the
      caller's responsibility to validate or sanitize filenames to prevent path traversal
      vulnerabilities (for example, absolute paths or paths with ".." components). When handling
      untrusted archives, consider resolving filenames using :func:`os.path.abspath`
      and checking against the target directory with :func:`os.path.commonpath`.

Path objects expose the following features of :mod:`pathlib.Path`
objects:

Path objects are traversable using the ``/`` operator or ``joinpath``.

.. attribute:: Path.name

   The final path component.

.. method:: Path.open(mode='r', *, pwd, **)

   Invoke :meth:`ZipFile.open` on the current path.
   Allows opening for read or write, text or binary
   through supported modes: 'r', 'w', 'rb', 'wb'.
   Positional and keyword arguments are passed through to
   :class:`io.TextIOWrapper` when opened as text and
   ignored otherwise.
   ``pwd`` is the ``pwd`` parameter to
   :meth:`ZipFile.open`.

   .. versionchanged:: 3.9
      Added support for text and binary modes for open. Default
      mode is now text.

   .. versionchanged:: 3.11.2
      The ``encoding`` parameter can be supplied as a positional argument
      without causing a :exc:`TypeError`. As it could in 3.9. Code needing to
      be compatible with unpatched 3.10 and 3.11 versions must pass all
      :class:`io.TextIOWrapper` arguments, ``encoding`` included, as keywords.

.. method:: Path.iterdir()

   Enumerate the children of the current directory.

.. method:: Path.is_dir()

   Return ``True`` if the current context references a directory.

.. method:: Path.is_file()

   Return ``True`` if the current context references a file.

.. method:: Path.is_symlink()

   Return ``True`` if the current context references a symbolic link.

   .. versionadded:: 3.12

   .. versionchanged:: 3.13
      Previously, ``is_symlink`` would unconditionally return ``False``.

.. method:: Path.exists()

   Return ``True`` if the current context references a file or
   directory in the zip file.

.. data:: Path.suffix

   The last dot-separated portion of the final component, if any.
   This is commonly called the file extension.

   .. versionadded:: 3.11
      Added :data:`Path.suffix` property.

.. data:: Path.stem

   The final path component, without its suffix.

   .. versionadded:: 3.11
      Added :data:`Path.stem` property.

.. data:: Path.suffixes

   A list of the path’s suffixes, commonly called file extensions.

   .. versionadded:: 3.11
      Added :data:`Path.suffixes` property.

.. method:: Path.read_text(*, **)

   Read the current file as unicode text. Positional and
   keyword arguments are passed through to
   :class:`io.TextIOWrapper` (except ``buffer``, which is
   implied by the context).

   .. versionchanged:: 3.11.2
      The ``encoding`` parameter can be supplied as a positional argument
      without causing a :exc:`TypeError`. As it could in 3.9. Code needing to
      be compatible with unpatched 3.10 and 3.11 versions must pass all
      :class:`io.TextIOWrapper` arguments, ``encoding`` included, as keywords.

.. method:: Path.read_bytes()

   Read the current file as bytes.

.. method:: Path.joinpath(*other)

   Return a new Path object with each of the *other* arguments
   joined. The following are equivalent::

   >>> Path(...).joinpath('child').joinpath('grandchild')
   >>> Path(...).joinpath('child', 'grandchild')
   >>> Path(...) / 'child' / 'grandchild'

   .. versionchanged:: 3.10
      Prior to 3.10, ``joinpath`` was undocumented and accepted
      exactly one parameter.

The :pypi:`zipp` project provides backports
of the latest path object functionality to older Pythons. Use
``zipp.Path`` in place of ``zipfile.Path`` for early access to
changes.

.. _pyzipfile-objects:

PyZipFile objects
-----------------

The :class:`PyZipFile` constructor takes the same parameters as the
:class:`ZipFile` constructor, and one additional parameter, *optimize*.

.. class:: PyZipFile(file, mode='r', compression=ZIP_STORED, allowZip64=True, \
                     optimize=-1)

   .. versionchanged:: 3.2
      Added the *optimize* parameter.

   .. versionchanged:: 3.4
      ZIP64 extensions are enabled by default.

   Instances have one method in addition to those of :class:`ZipFile` objects:

   .. method:: PyZipFile.writepy(pathname, basename='', filterfunc=None)

      Search for files :file:`\*.py` and add the corresponding file to the
      archive.

      If the *optimize* parameter to :class:`PyZipFile` was not given or ``-1``,
      the corresponding file is a :file:`\*.pyc` file, compiling if necessary.

      If the *optimize* parameter to :class:`PyZipFile` was ``0``, ``1`` or
      ``2``, only files with that optimization level (see :func:`compile`) are
      added to the archive, compiling if necessary.

      If *pathname* is a file, the filename must end with :file:`.py`, and
      just the (corresponding :file:`\*.pyc`) file is added at the top level
      (no path information).  If *pathname* is a file that does not end with
      :file:`.py`, a :exc:`RuntimeError` will be raised.  If it is a directory,
      and the directory is not a package directory, then all the files
      :file:`\*.pyc` are added at the top level.  If the directory is a
      package directory, then all :file:`\*.pyc` are added under the package
      name as a file path, and if any subdirectories are package directories,
      all of these are added recursively in sorted order.

      *basename* is intended for internal use only.

      *filterfunc*, if given, must be a function taking a single string
      argument.  It will be passed each path (including each individual full
      file path) before it is added to the archive.  If *filterfunc* returns a
      false value, the path will not be added, and if it is a directory its
      contents will be ignored.  For example, if our test files are all either
      in ``test`` directories or start with the string ``test_``, we can use a
      *filterfunc* to exclude them::

          >>> zf = PyZipFile('myprog.zip')
          >>> def notests(s):
          ...     fn = os.path.basename(s)
          ...     return (not (fn == 'test' or fn.startswith('test_')))
          ...
          >>> zf.writepy('myprog', filterfunc=notests)

      The :meth:`writepy` method makes archives with file names like
      this::

         string.pyc                   # Top level name
         test/__init__.pyc            # Package directory
         test/testall.pyc             # Module test.testall
         test/bogus/__init__.pyc      # Subpackage directory
         test/bogus/myfile.pyc        # Submodule test.bogus.myfile

      .. versionchanged:: 3.4
         Added the *filterfunc* parameter.

      .. versionchanged:: 3.6.2
         The *pathname* parameter accepts a :term:`path-like object`.

      .. versionchanged:: 3.7
         Recursion sorts directory entries.


.. _zipinfo-objects:

ZipInfo objects
---------------

Instances of the :class:`ZipInfo` class are returned by the :meth:`.getinfo` and
:meth:`.infolist` methods of :class:`ZipFile` objects.  Each object stores
information about a single member of the ZIP archive.

There is one classmethod to make a :class:`ZipInfo` instance for a filesystem
file:

.. classmethod:: ZipInfo.from_file(filename, arcname=None, *, \
                                   strict_timestamps=True)

   Construct a :class:`ZipInfo` instance for a file on the filesystem, in
   preparation for adding it to a zip file.

   *filename* should be the path to a file or directory on the filesystem.

   If *arcname* is specified, it is used as the name within the archive.
   If *arcname* is not specified, the name will be the same as *filename*, but
   with any drive letter and leading path separators removed.

   The *strict_timestamps* argument, when set to ``False``, allows to
   zip files older than 1980-01-01 at the cost of setting the
   timestamp to 1980-01-01.
   Similar behavior occurs with files newer than 2107-12-31,
   the timestamp is also set to the limit.

   .. versionadded:: 3.6

   .. versionchanged:: 3.6.2
      The *filename* parameter accepts a :term:`path-like object`.

   .. versionchanged:: 3.8
      Added the *strict_timestamps* keyword-only parameter.


Instances have the following methods and attributes:

.. method:: ZipInfo.is_dir()

   Return ``True`` if this archive member is a directory.

   This uses the entry's name: directories should always end with ``/``.

   .. versionadded:: 3.6


.. attribute:: ZipInfo.filename

   Name of the file in the archive.


.. attribute:: ZipInfo.date_time

   The time and date of the last modification to the archive member.  This is a
   tuple of six values representing the "last [modified] file time" and "last [modified] file date"
   fields from the ZIP file's central directory.

   The tuple contains:

   +-------+--------------------------+
   | Index | Value                    |
   +=======+==========================+
   | ``0`` | Year (>= 1980)           |
   +-------+--------------------------+
   | ``1`` | Month (one-based)        |
   +-------+--------------------------+
   | ``2`` | Day of month (one-based) |
   +-------+--------------------------+
   | ``3`` | Hours (zero-based)       |
   +-------+--------------------------+
   | ``4`` | Minutes (zero-based)     |
   +-------+--------------------------+
   | ``5`` | Seconds (zero-based)     |
   +-------+--------------------------+

   .. note::

      The ZIP format supports multiple timestamp fields in different locations
      (central directory, extra fields for NTFS/UNIX systems, etc.). This attribute
      specifically returns the timestamp from the central directory. The central
      directory timestamp format in ZIP files does not support timestamps before
      1980. While some extra field formats (such as UNIX timestamps) can represent
      earlier dates, this attribute only returns the central directory timestamp.

      The central directory timestamp is interpreted as representing local
      time, rather than UTC time, to match the behavior of other zip tools.


.. attribute:: ZipInfo.compress_type

   Type of compression for the archive member.


.. attribute:: ZipInfo.comment

   Comment for the individual archive member as a :class:`bytes` object.


.. attribute:: ZipInfo.extra

   Expansion field data.  The `PKZIP Application Note`_ contains
   some comments on the internal structure of the data contained in this
   :class:`bytes` object.


.. attribute:: ZipInfo.create_system

   System which created ZIP archive.


.. attribute:: ZipInfo.create_version

   PKZIP version which created ZIP archive.


.. attribute:: ZipInfo.extract_version

   PKZIP version needed to extract archive.


.. attribute:: ZipInfo.reserved

   Must be zero.


.. attribute:: ZipInfo.flag_bits

   ZIP flag bits.


.. attribute:: ZipInfo.volume

   Volume number of file header.


.. attribute:: ZipInfo.internal_attr

   Internal attributes.


.. attribute:: ZipInfo.external_attr

   External file attributes.


.. attribute:: ZipInfo.header_offset

   Byte offset to the file header.


.. attribute:: ZipInfo.CRC

   CRC-32 of the uncompressed file.


.. attribute:: ZipInfo.compress_size

   Size of the compressed data.


.. attribute:: ZipInfo.file_size

   Size of the uncompressed file.


.. _zipfile-commandline:
.. program:: zipfile

Command-line interface
----------------------

The :mod:`!zipfile` module provides a simple command-line interface to interact
with ZIP archives.

If you want to create a new ZIP archive, specify its name after the :option:`-c`
option and then list the filename(s) that should be included:

.. code-block:: shell-session

    $ python -m zipfile -c monty.zip spam.txt eggs.txt

Passing a directory is also acceptable:

.. code-block:: shell-session

    $ python -m zipfile -c monty.zip life-of-brian_1979/

If you want to extract a ZIP archive into the specified directory, use
the :option:`-e` option:

.. code-block:: shell-session

    $ python -m zipfile -e monty.zip target-dir/

For a list of the files in a ZIP archive, use the :option:`-l` option:

.. code-block:: shell-session

    $ python -m zipfile -l monty.zip


Command-line options
~~~~~~~~~~~~~~~~~~~~

.. option:: -l <zipfile>
            --list <zipfile>

   List files in a zipfile.

.. option:: -c <zipfile> <source1> ... <sourceN>
            --create <zipfile> <source1> ... <sourceN>

   Create zipfile from source files.

.. option:: -e <zipfile> <output_dir>
            --extract <zipfile> <output_dir>

   Extract zipfile into target directory.

.. option:: -t <zipfile>
            --test <zipfile>

   Test whether the zipfile is valid or not.

.. option:: --metadata-encoding <encoding>

   Specify encoding of member names for :option:`-l`, :option:`-e` and
   :option:`-t`.

   .. versionadded:: 3.11


Decompression pitfalls
----------------------

The extraction in zipfile module might fail due to some pitfalls listed below.

From file itself
~~~~~~~~~~~~~~~~

Decompression may fail due to incorrect password / CRC checksum / ZIP format or
unsupported compression method / decryption.

File system limitations
~~~~~~~~~~~~~~~~~~~~~~~

Exceeding limitations on different file systems can cause decompression failed.
Such as allowable characters in the directory entries, length of the file name,
length of the pathname, size of a single file, and number of files, etc.

.. _zipfile-resources-limitations:

Resources limitations
~~~~~~~~~~~~~~~~~~~~~

The lack of memory or disk volume would lead to decompression
failed. For example, decompression bombs (aka `ZIP bomb`_)
apply to zipfile library that can cause disk volume exhaustion.

Interruption
~~~~~~~~~~~~

Interruption during the decompression, such as pressing control-C or killing the
decompression process may result in incomplete decompression of the archive.

Default behaviors of extraction
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Not knowing the default extraction behaviors
can cause unexpected decompression results.
For example, when extracting the same archive twice,
it overwrites files without asking.


.. _ZIP bomb: https://en.wikipedia.org/wiki/Zip_bomb
.. _PKZIP Application Note: https://pkware.cachefly.net/webdocs/casestudies/APPNOTE.TXT