Doc/library/timeit.rst

:mod:`!timeit` --- Measure execution time of small code snippets
================================================================

.. module:: timeit
   :synopsis: Measure the execution time of small code snippets.

**Source code:** :source:`Lib/timeit.py`

.. index::
   single: Benchmarking
   single: Performance

--------------

This module provides a simple way to time small bits of Python code. It has both
a :ref:`timeit-command-line-interface` as well as a :ref:`callable <python-interface>`
one.  It avoids a number of common traps for measuring execution times.
See also Tim Peters' introduction to the "Algorithms" chapter in the second
edition of *Python Cookbook*, published by O'Reilly.


Basic examples
--------------

The following example shows how the :ref:`timeit-command-line-interface`
can be used to compare three different expressions:

.. code-block:: shell-session

   $ python -m timeit "'-'.join(str(n) for n in range(100))"
   10000 loops, best of 5: 30.2 usec per loop
   $ python -m timeit "'-'.join([str(n) for n in range(100)])"
   10000 loops, best of 5: 27.5 usec per loop
   $ python -m timeit "'-'.join(map(str, range(100)))"
   10000 loops, best of 5: 23.2 usec per loop

This can be achieved from the :ref:`python-interface` with::

   >>> import timeit
   >>> timeit.timeit('"-".join(str(n) for n in range(100))', number=10000)
   0.3018611848820001
   >>> timeit.timeit('"-".join([str(n) for n in range(100)])', number=10000)
   0.2727368790656328
   >>> timeit.timeit('"-".join(map(str, range(100)))', number=10000)
   0.23702679807320237

A callable can also be passed from the :ref:`python-interface`::

   >>> timeit.timeit(lambda: "-".join(map(str, range(100))), number=10000)
   0.19665591977536678

Note however that :func:`.timeit` will automatically determine the number of
repetitions only when the command-line interface is used.  In the
:ref:`timeit-examples` section you can find more advanced examples.


.. _python-interface:

Python interface
----------------

The module defines three convenience functions and a public class:


.. function:: timeit(stmt='pass', setup='pass', timer=<default timer>, number=1000000, globals=None)

   Create a :class:`Timer` instance with the given statement, *setup* code and
   *timer* function and run its :meth:`.timeit` method with *number* executions.
   The optional *globals* argument specifies a namespace in which to execute the
   code.

   .. versionchanged:: 3.5
      The optional *globals* parameter was added.


.. function:: repeat(stmt='pass', setup='pass', timer=<default timer>, repeat=5, number=1000000, globals=None)

   Create a :class:`Timer` instance with the given statement, *setup* code and
   *timer* function and run its :meth:`.repeat` method with the given *repeat*
   count and *number* executions.  The optional *globals* argument specifies a
   namespace in which to execute the code.

   .. versionchanged:: 3.5
      The optional *globals* parameter was added.

   .. versionchanged:: 3.7
      Default value of *repeat* changed from 3 to 5.


.. function:: default_timer()

   The default timer, which is always time.perf_counter(), returns float seconds.
   An alternative, time.perf_counter_ns, returns integer nanoseconds.

   .. versionchanged:: 3.3
      :func:`time.perf_counter` is now the default timer.


.. class:: Timer(stmt='pass', setup='pass', timer=<timer function>, globals=None)

   Class for timing execution speed of small code snippets.

   The constructor takes a statement to be timed, an additional statement used
   for setup, and a timer function.  Both statements default to ``'pass'``;
   the timer function is platform-dependent (see the module doc string).
   *stmt* and *setup* may also contain multiple statements separated by ``;``
   or newlines, as long as they don't contain multi-line string literals.  The
   statement will by default be executed within timeit's namespace; this behavior
   can be controlled by passing a namespace to *globals*.

   To measure the execution time of the first statement, use the :meth:`.timeit`
   method.  The :meth:`.repeat` and :meth:`.autorange` methods are convenience
   methods to call :meth:`.timeit` multiple times.

   The execution time of *setup* is excluded from the overall timed execution run.

   The *stmt* and *setup* parameters can also take objects that are callable
   without arguments.  This will embed calls to them in a timer function that
   will then be executed by :meth:`.timeit`.  Note that the timing overhead is a
   little larger in this case because of the extra function calls.

   .. versionchanged:: 3.5
      The optional *globals* parameter was added.

   .. method:: Timer.timeit(number=1000000)

      Time *number* executions of the main statement.  This executes the setup
      statement once, and then returns the time it takes to execute the main
      statement a number of times.  The default timer returns seconds as a float.
      The argument is the number of times through the loop, defaulting to one
      million.  The main statement, the setup statement and the timer function
      to be used are passed to the constructor.

      .. note::

         By default, :meth:`.timeit` temporarily turns off :term:`garbage
         collection` during the timing.  The advantage of this approach is that
         it makes independent timings more comparable.  The disadvantage is
         that GC may be an important component of the performance of the
         function being measured.  If so, GC can be re-enabled as the first
         statement in the *setup* string.  For example::

            timeit.Timer('for i in range(10): oct(i)', 'gc.enable()').timeit()


   .. method:: Timer.autorange(callback=None, target_time=None)

      Automatically determine how many times to call :meth:`.timeit`.

      This is a convenience function that calls :meth:`.timeit` repeatedly
      so that the total time >= *Timer.target_time* seconds, returning the eventual
      (number of loops, time taken for that number of loops). It calls
      :meth:`.timeit` with increasing numbers from the sequence 1, 2, 5,
      10, 20, 50, ... until the time taken is at least *target_time* seconds.

      If *callback* is given and is not ``None``, it will be called after
      each trial with two arguments: ``callback(number, time_taken)``.

      .. versionadded:: 3.6

      .. versionchanged:: 3.15
         The optional *target_time* parameter was added.


   .. method:: Timer.repeat(repeat=5, number=1000000)

      Call :meth:`.timeit` a few times.

      This is a convenience function that calls the :meth:`.timeit` repeatedly,
      returning a list of results.  The first argument specifies how many times
      to call :meth:`.timeit`.  The second argument specifies the *number*
      argument for :meth:`.timeit`.

      .. note::

         It's tempting to calculate mean and standard deviation from the result
         vector and report these.  However, this is not very useful.
         In a typical case, the lowest value gives a lower bound for how fast
         your machine can run the given code snippet; higher values in the
         result vector are typically not caused by variability in Python's
         speed, but by other processes interfering with your timing accuracy.
         So the :func:`min` of the result is probably the only number you
         should be interested in.  After that, you should look at the entire
         vector and apply common sense rather than statistics.

      .. versionchanged:: 3.7
         Default value of *repeat* changed from 3 to 5.


   .. method:: Timer.print_exc(file=None)

      Helper to print a traceback from the timed code.

      Typical use::

         t = Timer(...)       # outside the try/except
         try:
             t.timeit(...)    # or t.repeat(...)
         except Exception:
             t.print_exc()

      The advantage over the standard traceback is that source lines in the
      compiled template will be displayed.  The optional *file* argument directs
      where the traceback is sent; it defaults to :data:`sys.stderr`.


.. _timeit-command-line-interface:

Command-line interface
----------------------

When called as a program from the command line, the following form is used::

   python -m timeit [-n N] [-r N] [-u U] [-s S] [-p] [-v] [-h] [statement ...]

Where the following options are understood:

.. program:: timeit

.. option:: -n N, --number=N

   how many times to execute 'statement'

.. option:: -r N, --repeat=N

   how many times to repeat the timer (default 5)

.. option:: -s S, --setup=S

   statement to be executed once initially (default ``pass``)

.. option:: -p, --process

   measure process time, not wallclock time, using :func:`time.process_time`
   instead of :func:`time.perf_counter`, which is the default

   .. versionadded:: 3.3

.. option:: -u, --unit=U

   specify a time unit for timer output; can select ``nsec``, ``usec``, ``msec``, or ``sec``

   .. versionadded:: 3.5

.. option:: -t, --target-time=T

   if :option:`--number` is 0, the code will run until it takes at
   least this many seconds (default: 0.2)

   .. versionadded:: 3.15

.. option:: -v, --verbose

   print raw timing results; repeat for more digits precision

.. option:: -h, --help

   print a short usage message and exit

A multi-line statement may be given by specifying each line as a separate
statement argument; indented lines are possible by enclosing an argument in
quotes and using leading spaces.  Multiple :option:`-s` options are treated
similarly.

If :option:`-n` is not given, a suitable number of loops is calculated by trying
increasing numbers from the sequence 1, 2, 5, 10, 20, 50, ... until the total
time is at least :option:`--target-time` seconds (default: 0.2).

:func:`default_timer` measurements can be affected by other programs running on
the same machine, so the best thing to do when accurate timing is necessary is
to repeat the timing a few times and use the best time.  The :option:`-r`
option is good for this; the default of 5 repetitions is probably enough in
most cases.  You can use :func:`time.process_time` to measure CPU time.

.. note::

   There is a certain baseline overhead associated with executing a pass statement.
   The code here doesn't try to hide it, but you should be aware of it.  The
   baseline overhead can be measured by invoking the program without arguments,
   and it might differ between Python versions.

.. versionadded:: 3.15
   Output is in color by default and can be
   :ref:`controlled using environment variables <using-on-controlling-color>`.

.. _timeit-examples:

Examples
--------

It is possible to provide a setup statement that is executed only once at the beginning:

.. code-block:: shell-session

   $ python -m timeit -s "text = 'sample string'; char = 'g'" "char in text"
   5000000 loops, best of 5: 0.0877 usec per loop
   $ python -m timeit -s "text = 'sample string'; char = 'g'" "text.find(char)"
   1000000 loops, best of 5: 0.342 usec per loop

In the output, there are three fields. The loop count, which tells you how many
times the statement body was run per timing loop repetition. The repetition
count ('best of 5') which tells you how many times the timing loop was
repeated, and finally the time the statement body took on average within the
best repetition of the timing loop. That is, the time the fastest repetition
took divided by the loop count.

::

   >>> import timeit
   >>> timeit.timeit('char in text', setup='text = "sample string"; char = "g"')
   0.41440500499993504
   >>> timeit.timeit('text.find(char)', setup='text = "sample string"; char = "g"')
   1.7246671520006203

The same can be done using the :class:`Timer` class and its methods::

   >>> import timeit
   >>> t = timeit.Timer('char in text', setup='text = "sample string"; char = "g"')
   >>> t.timeit()
   0.3955516149999312
   >>> t.repeat()
   [0.40183617287970225, 0.37027556854118704, 0.38344867356679524, 0.3712595970846668, 0.37866875250654886]


The following examples show how to time expressions that contain multiple lines.
Here we compare the cost of using :func:`hasattr` vs. :keyword:`try`/:keyword:`except`
to test for missing and present object attributes:

.. code-block:: shell-session

   $ python -m timeit "try:" "  str.__bool__" "except AttributeError:" "  pass"
   20000 loops, best of 5: 15.7 usec per loop
   $ python -m timeit "if hasattr(str, '__bool__'): pass"
   50000 loops, best of 5: 4.26 usec per loop

   $ python -m timeit "try:" "  int.__bool__" "except AttributeError:" "  pass"
   200000 loops, best of 5: 1.43 usec per loop
   $ python -m timeit "if hasattr(int, '__bool__'): pass"
   100000 loops, best of 5: 2.23 usec per loop

::

   >>> import timeit
   >>> # attribute is missing
   >>> s = """\
   ... try:
   ...     str.__bool__
   ... except AttributeError:
   ...     pass
   ... """
   >>> timeit.timeit(stmt=s, number=100000)
   0.9138244460009446
   >>> s = "if hasattr(str, '__bool__'): pass"
   >>> timeit.timeit(stmt=s, number=100000)
   0.5829014980008651
   >>>
   >>> # attribute is present
   >>> s = """\
   ... try:
   ...     int.__bool__
   ... except AttributeError:
   ...     pass
   ... """
   >>> timeit.timeit(stmt=s, number=100000)
   0.04215312199994514
   >>> s = "if hasattr(int, '__bool__'): pass"
   >>> timeit.timeit(stmt=s, number=100000)
   0.08588060699912603


To give the :mod:`!timeit` module access to functions you define, you can pass a
*setup* parameter which contains an import statement::

   def test():
       """Stupid test function"""
       L = [i for i in range(100)]

   if __name__ == '__main__':
       import timeit
       print(timeit.timeit("test()", setup="from __main__ import test"))

Another option is to pass :func:`globals` to the  *globals* parameter, which will cause the code
to be executed within your current global namespace.  This can be more convenient
than individually specifying imports::

   def f(x):
       return x**2
   def g(x):
       return x**4
   def h(x):
       return x**8

   import timeit
   print(timeit.timeit('[func(42) for func in (f,g,h)]', globals=globals()))