| # |
| # |
| |
| DESTDIR = |
| |
| VPATH = @srcdir@ @srcdir@/.. |
| srcdir = @srcdir@ |
| objdir = . |
| srcroot = $(srcdir)/../.. |
| objroot = $(objdir)/../.. |
| |
| prefix = @prefix@ |
| exec_prefix = @exec_prefix@ |
| |
| host_alias = @host_alias@ |
| target_alias = @target_alias@ |
| |
| bindir = @bindir@ |
| libdir = @libdir@ |
| tooldir = $(exec_prefix)/$(target_alias) |
| |
| INSTALL = @INSTALL@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| |
| # Multilib support variables. |
| # TOP is used instead of MULTI{BUILD,SRC}TOP. |
| MULTIDIRS = |
| MULTISUBDIR = |
| |
| SHELL = /bin/sh |
| |
| CC = @CC@ |
| |
| AS = @AS@ |
| AR = @AR@ |
| LD = @LD@ |
| RANLIB = @RANLIB@ |
| |
| OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \ |
| then echo ${objroot}/../binutils/objdump ; \ |
| else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi` |
| OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \ |
| then echo ${objroot}/../binutils/objcopy ; \ |
| else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi` |
| |
| # Here is all of the handlers stuff |
| H_SCRIPTS = |
| H_BSP = libh.a |
| H_OBJS = intable.o dvz_hndl.o flg_hndl.o iad_hndl.o svc_hndl.o und_hndl.o |
| H_TEST = hndl-test |
| H_INSTALL = install-hndl |
| |
| # Here is all of the simulator stuff |
| SIM_SCRIPTS = sim.ld |
| SIM_BSP = libsim.a |
| SIM_OBJS = _exit.o close.o _getenv.o lseek.o open.o read.o \ |
| _rename.o sbrk.o time.o unlink.o write.o \ |
| stat.o putnum.o kill.o getpid.o isatty.o fstat.o |
| SIM_TEST = sim-test |
| SIM_INSTALL = install-sim |
| |
| # Here is all of the CRT stuff |
| CRT = crti.o crtn.o crt0.o |
| CRT_INSTALL = install-crt |
| |
| # Host specific makefile fragment comes in here. |
| @host_makefile_frag@ |
| |
| # |
| # build a test program for each target board. Just trying to get |
| # it to link is a good test, so we ignore all the errors for now. |
| # |
| all: ${CRT} ${SIM_BSP} ${H_BSP} |
| |
| # |
| # here's where we build the board support packages for each target |
| # |
| ${H_BSP}: ${H_OBJS} |
| ${AR} ${ARFLAGS} ${H_BSP} ${H_OBJS} |
| ${RANLIB} ${H_BSP} |
| |
| ${SIM_BSP}: ${SIM_OBJS} |
| ${AR} ${ARFLAGS} ${SIM_BSP} ${SIM_OBJS} |
| ${RANLIB} ${SIM_BSP} |
| |
| # |
| # here's where we build the test programs for each target |
| # |
| .PHONY: test |
| test: ${SIM_TEST} ${H_TEST} |
| |
| hndl-test: hndl-test.x hndl-test.dis |
| |
| hndl-test.x: test.o ${H_BSP} |
| ${CC} ${LDFLAGS_FOR_TARGET} -L${objdir} \ |
| test.o \ |
| -o hndl-test.x ${LIBS_FOR_TARGET} -lc ${H_BSP} -Wl,-T${SIM_SCRIPTS} |
| |
| hndl-test.dis: hndl-test.x |
| ${OBJDUMP} -d hndl-test.x > hndl-test.dis |
| |
| |
| sim-test: sim-test.x sim-test.dis |
| |
| sim-test.x: test.o ${SIM_BSP} |
| ${CC} ${LDFLAGS_FOR_TARGET} -L${objdir} \ |
| test.o \ |
| -o sim-test.x ${LIBS_FOR_TARGET} -lc ${SIM_BSP} -Wl,-T${SIM_SCRIPTS} |
| |
| sim-test.dis: sim-test.x |
| ${OBJDUMP} -d sim-test.x > sim-test.dis |
| |
| # |
| # |
| # |
| .c.S: |
| ${CC} ${CFLAGS_FOR_TARGET} -c $< |
| |
| clean mostlyclean: |
| rm -f a.out core *.i *.o *-test *.srec *.dis *.x $(SIM_BSP) $(H_BSP) |
| |
| distclean maintainer-clean realclean: clean |
| rm -f Makefile config.status *~ |
| |
| .PHONY: install info install-info clean-info |
| install: ${CRT_INSTALL} ${SIM_INSTALL} ${H_INSTALL} |
| |
| install-crt: |
| set -e; for x in ${CRT} ; do\ |
| ${INSTALL_DATA} $$x $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; \ |
| done |
| |
| install-sim: |
| for x in ${SIM_BSP} ; do\ |
| ${INSTALL_PROGRAM} $${x} $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; \ |
| done |
| for x in ${SIM_SCRIPTS}; do\ |
| ${INSTALL_DATA} ${srcdir}/$${x} $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; \ |
| done |
| |
| install-hndl: |
| for x in ${H_BSP}; do\ |
| ${INSTALL_PROGRAM} $${x} $(DESTDIR)${tooldir}/lib${MULTISUBDIR}/$$x; \ |
| done |
| |
| doc: |
| info: |
| install-info: |
| clean-info: |
| |
| Makefile: Makefile.in config.status @host_makefile_frag_path@ |
| $(SHELL) config.status |
| |
| config.status: configure |
| $(SHELL) config.status --recheck |