| /* Copyright (c) 2005-2008, Google Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are |
| * met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following disclaimer |
| * in the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name of Google Inc. nor the names of its |
| * contributors may be used to endorse or promote products derived from |
| * this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| * --- |
| * Author: Markus Gutschke |
| */ |
| |
| /* This file includes Linux-specific support functions common to the |
| * coredumper and the thread lister; primarily, this is a collection |
| * of direct system calls, and a couple of symbols missing from |
| * standard header files. |
| * There are a few options that the including file can set to control |
| * the behavior of this file: |
| * |
| * SYS_CPLUSPLUS: |
| * The entire header file will normally be wrapped in 'extern "C" { }", |
| * making it suitable for compilation as both C and C++ source. If you |
| * do not want to do this, you can set the SYS_CPLUSPLUS macro to inhibit |
| * the wrapping. N.B. doing so will suppress inclusion of all prerequisite |
| * system header files, too. It is the caller's responsibility to provide |
| * the necessary definitions. |
| * |
| * SYS_ERRNO: |
| * All system calls will update "errno" unless overriden by setting the |
| * SYS_ERRNO macro prior to including this file. SYS_ERRNO should be |
| * an l-value. |
| * |
| * SYS_INLINE: |
| * New symbols will be defined "static inline", unless overridden by |
| * the SYS_INLINE macro. |
| * |
| * SYS_LINUX_SYSCALL_SUPPORT_H |
| * This macro is used to avoid multiple inclusions of this header file. |
| * If you need to include this file more than once, make sure to |
| * unset SYS_LINUX_SYSCALL_SUPPORT_H before each inclusion. |
| * |
| * SYS_PREFIX: |
| * New system calls will have a prefix of "sys_" unless overridden by |
| * the SYS_PREFIX macro. Valid values for this macro are [0..9] which |
| * results in prefixes "sys[0..9]_". It is also possible to set this |
| * macro to -1, which avoids all prefixes. |
| * |
| * This file defines a few internal symbols that all start with "LSS_". |
| * Do not access these symbols from outside this file. They are not part |
| * of the supported API. |
| * |
| * NOTE: This is a stripped down version of the official opensource |
| * version of linux_syscall_support.h, which lives at |
| * http://code.google.com/p/linux-syscall-support/ |
| * It includes only the syscalls that are used in perftools, plus a |
| * few extra. Here's the breakdown: |
| * 1) Perftools uses these: grep -rho 'sys_[a-z0-9_A-Z]* *(' src | sort -u |
| * sys__exit( |
| * sys_clone( |
| * sys_close( |
| * sys_fcntl( |
| * sys_fstat( |
| * sys_futex( |
| * sys_getcpu( |
| * sys_getdents( |
| * sys_getppid( |
| * sys_gettid( |
| * sys_lseek( |
| * sys_mmap( |
| * sys_mremap( |
| * sys_munmap( |
| * sys_open( |
| * sys_pipe( |
| * sys_prctl( |
| * sys_ptrace( |
| * sys_ptrace_detach( |
| * sys_read( |
| * sys_sched_yield( |
| * sys_sigaction( |
| * sys_sigaltstack( |
| * sys_sigdelset( |
| * sys_sigfillset( |
| * sys_sigprocmask( |
| * sys_socket( |
| * sys_stat( |
| * sys_waitpid( |
| * 2) These are used as subroutines of the above: |
| * sys_getpid -- gettid |
| * sys_kill -- ptrace_detach |
| * sys_restore -- sigaction |
| * sys_restore_rt -- sigaction |
| * sys_socketcall -- socket |
| * sys_wait4 -- waitpid |
| * 3) I left these in even though they're not used. They either |
| * complement the above (write vs read) or are variants (rt_sigaction): |
| * sys_fstat64 |
| * sys_getdents64 |
| * sys_llseek |
| * sys_mmap2 |
| * sys_openat |
| * sys_rt_sigaction |
| * sys_rt_sigprocmask |
| * sys_sigaddset |
| * sys_sigemptyset |
| * sys_stat64 |
| * sys_write |
| */ |
| #ifndef SYS_LINUX_SYSCALL_SUPPORT_H |
| #define SYS_LINUX_SYSCALL_SUPPORT_H |
| |
| /* We currently only support x86-32, x86-64, ARM, MIPS, and PPC on Linux. |
| * Porting to other related platforms should not be difficult. |
| */ |
| #if (defined(__i386__) || defined(__x86_64__) || defined(__arm__) || \ |
| defined(__mips__) || defined(__PPC__)) && defined(__linux) |
| |
| #ifndef SYS_CPLUSPLUS |
| #ifdef __cplusplus |
| /* Some system header files in older versions of gcc neglect to properly |
| * handle being included from C++. As it appears to be harmless to have |
| * multiple nested 'extern "C"' blocks, just add another one here. |
| */ |
| extern "C" { |
| #endif |
| |
| #include <errno.h> |
| #include <signal.h> |
| #include <stdarg.h> |
| #include <stddef.h> |
| #include <stdint.h> |
| #include <string.h> |
| #include <sys/ptrace.h> |
| #include <sys/resource.h> |
| #include <sys/time.h> |
| #include <sys/types.h> |
| #if defined(__ANDROID__) |
| #include <sys/syscall.h> |
| #include <sys/linux-syscalls.h> |
| #else |
| #include <syscall.h> |
| #endif |
| #include <unistd.h> |
| #include <linux/unistd.h> |
| #include <endian.h> |
| |
| #ifdef __mips__ |
| /* Include definitions of the ABI currently in use. */ |
| #include <sgidefs.h> |
| #endif |
| |
| #endif |
| |
| /* As glibc often provides subtly incompatible data structures (and implicit |
| * wrapper functions that convert them), we provide our own kernel data |
| * structures for use by the system calls. |
| * These structures have been developed by using Linux 2.6.23 headers for |
| * reference. Note though, we do not care about exact API compatibility |
| * with the kernel, and in fact the kernel often does not have a single |
| * API that works across architectures. Instead, we try to mimic the glibc |
| * API where reasonable, and only guarantee ABI compatibility with the |
| * kernel headers. |
| * Most notably, here are a few changes that were made to the structures |
| * defined by kernel headers: |
| * |
| * - we only define structures, but not symbolic names for kernel data |
| * types. For the latter, we directly use the native C datatype |
| * (i.e. "unsigned" instead of "mode_t"). |
| * - in a few cases, it is possible to define identical structures for |
| * both 32bit (e.g. i386) and 64bit (e.g. x86-64) platforms by |
| * standardizing on the 64bit version of the data types. In particular, |
| * this means that we use "unsigned" where the 32bit headers say |
| * "unsigned long". |
| * - overall, we try to minimize the number of cases where we need to |
| * conditionally define different structures. |
| * - the "struct kernel_sigaction" class of structures have been |
| * modified to more closely mimic glibc's API by introducing an |
| * anonymous union for the function pointer. |
| * - a small number of field names had to have an underscore appended to |
| * them, because glibc defines a global macro by the same name. |
| */ |
| |
| /* include/linux/dirent.h */ |
| struct kernel_dirent64 { |
| unsigned long long d_ino; |
| long long d_off; |
| unsigned short d_reclen; |
| unsigned char d_type; |
| char d_name[256]; |
| }; |
| |
| /* include/linux/dirent.h */ |
| struct kernel_dirent { |
| long d_ino; |
| long d_off; |
| unsigned short d_reclen; |
| char d_name[256]; |
| }; |
| |
| /* include/linux/time.h */ |
| struct kernel_timespec { |
| long tv_sec; |
| long tv_nsec; |
| }; |
| |
| /* include/linux/time.h */ |
| struct kernel_timeval { |
| long tv_sec; |
| long tv_usec; |
| }; |
| |
| /* include/linux/resource.h */ |
| struct kernel_rusage { |
| struct kernel_timeval ru_utime; |
| struct kernel_timeval ru_stime; |
| long ru_maxrss; |
| long ru_ixrss; |
| long ru_idrss; |
| long ru_isrss; |
| long ru_minflt; |
| long ru_majflt; |
| long ru_nswap; |
| long ru_inblock; |
| long ru_oublock; |
| long ru_msgsnd; |
| long ru_msgrcv; |
| long ru_nsignals; |
| long ru_nvcsw; |
| long ru_nivcsw; |
| }; |
| |
| #if defined(__i386__) || defined(__arm__) || defined(__PPC__) |
| |
| /* include/asm-{arm,i386,mips,ppc}/signal.h */ |
| struct kernel_old_sigaction { |
| union { |
| void (*sa_handler_)(int); |
| void (*sa_sigaction_)(int, siginfo_t *, void *); |
| }; |
| unsigned long sa_mask; |
| unsigned long sa_flags; |
| void (*sa_restorer)(void); |
| } __attribute__((packed,aligned(4))); |
| #elif (defined(__mips__) && _MIPS_SIM == _MIPS_SIM_ABI32) |
| #define kernel_old_sigaction kernel_sigaction |
| #endif |
| |
| /* Some kernel functions (e.g. sigaction() in 2.6.23) require that the |
| * exactly match the size of the signal set, even though the API was |
| * intended to be extensible. We define our own KERNEL_NSIG to deal with |
| * this. |
| * Please note that glibc provides signals [1.._NSIG-1], whereas the |
| * kernel (and this header) provides the range [1..KERNEL_NSIG]. The |
| * actual number of signals is obviously the same, but the constants |
| * differ by one. |
| */ |
| #ifdef __mips__ |
| #define KERNEL_NSIG 128 |
| #else |
| #define KERNEL_NSIG 64 |
| #endif |
| |
| /* include/asm-{arm,i386,mips,x86_64}/signal.h */ |
| struct kernel_sigset_t { |
| unsigned long sig[(KERNEL_NSIG + 8*sizeof(unsigned long) - 1)/ |
| (8*sizeof(unsigned long))]; |
| }; |
| |
| /* include/asm-{arm,i386,mips,x86_64,ppc}/signal.h */ |
| struct kernel_sigaction { |
| #ifdef __mips__ |
| unsigned long sa_flags; |
| union { |
| void (*sa_handler_)(int); |
| void (*sa_sigaction_)(int, siginfo_t *, void *); |
| }; |
| struct kernel_sigset_t sa_mask; |
| #else |
| union { |
| void (*sa_handler_)(int); |
| void (*sa_sigaction_)(int, siginfo_t *, void *); |
| }; |
| unsigned long sa_flags; |
| void (*sa_restorer)(void); |
| struct kernel_sigset_t sa_mask; |
| #endif |
| }; |
| |
| /* include/asm-{arm,i386,mips,ppc}/stat.h */ |
| #ifdef __mips__ |
| #if _MIPS_SIM == _MIPS_SIM_ABI64 |
| struct kernel_stat { |
| #else |
| struct kernel_stat64 { |
| #endif |
| unsigned st_dev; |
| unsigned __pad0[3]; |
| unsigned long long st_ino; |
| unsigned st_mode; |
| unsigned st_nlink; |
| unsigned st_uid; |
| unsigned st_gid; |
| unsigned st_rdev; |
| unsigned __pad1[3]; |
| long long st_size; |
| unsigned st_atime_; |
| unsigned st_atime_nsec_; |
| unsigned st_mtime_; |
| unsigned st_mtime_nsec_; |
| unsigned st_ctime_; |
| unsigned st_ctime_nsec_; |
| unsigned st_blksize; |
| unsigned __pad2; |
| unsigned long long st_blocks; |
| }; |
| #elif defined __PPC__ |
| struct kernel_stat64 { |
| unsigned long long st_dev; |
| unsigned long long st_ino; |
| unsigned st_mode; |
| unsigned st_nlink; |
| unsigned st_uid; |
| unsigned st_gid; |
| unsigned long long st_rdev; |
| unsigned short int __pad2; |
| long long st_size; |
| long st_blksize; |
| long long st_blocks; |
| long st_atime_; |
| unsigned long st_atime_nsec_; |
| long st_mtime_; |
| unsigned long st_mtime_nsec_; |
| long st_ctime_; |
| unsigned long st_ctime_nsec_; |
| unsigned long __unused4; |
| unsigned long __unused5; |
| }; |
| #else |
| struct kernel_stat64 { |
| unsigned long long st_dev; |
| unsigned char __pad0[4]; |
| unsigned __st_ino; |
| unsigned st_mode; |
| unsigned st_nlink; |
| unsigned st_uid; |
| unsigned st_gid; |
| unsigned long long st_rdev; |
| unsigned char __pad3[4]; |
| long long st_size; |
| unsigned st_blksize; |
| unsigned long long st_blocks; |
| unsigned st_atime_; |
| unsigned st_atime_nsec_; |
| unsigned st_mtime_; |
| unsigned st_mtime_nsec_; |
| unsigned st_ctime_; |
| unsigned st_ctime_nsec_; |
| unsigned long long st_ino; |
| }; |
| #endif |
| |
| /* include/asm-{arm,i386,mips,x86_64,ppc}/stat.h */ |
| #if defined(__i386__) || defined(__arm__) |
| struct kernel_stat { |
| /* The kernel headers suggest that st_dev and st_rdev should be 32bit |
| * quantities encoding 12bit major and 20bit minor numbers in an interleaved |
| * format. In reality, we do not see useful data in the top bits. So, |
| * we'll leave the padding in here, until we find a better solution. |
| */ |
| unsigned short st_dev; |
| short pad1; |
| unsigned st_ino; |
| unsigned short st_mode; |
| unsigned short st_nlink; |
| unsigned short st_uid; |
| unsigned short st_gid; |
| unsigned short st_rdev; |
| short pad2; |
| unsigned st_size; |
| unsigned st_blksize; |
| unsigned st_blocks; |
| unsigned st_atime_; |
| unsigned st_atime_nsec_; |
| unsigned st_mtime_; |
| unsigned st_mtime_nsec_; |
| unsigned st_ctime_; |
| unsigned st_ctime_nsec_; |
| unsigned __unused4; |
| unsigned __unused5; |
| }; |
| #elif defined(__x86_64__) |
| struct kernel_stat { |
| uint64_t st_dev; |
| uint64_t st_ino; |
| uint64_t st_nlink; |
| unsigned st_mode; |
| unsigned st_uid; |
| unsigned st_gid; |
| unsigned __pad0; |
| uint64_t st_rdev; |
| int64_t st_size; |
| int64_t st_blksize; |
| int64_t st_blocks; |
| uint64_t st_atime_; |
| uint64_t st_atime_nsec_; |
| uint64_t st_mtime_; |
| uint64_t st_mtime_nsec_; |
| uint64_t st_ctime_; |
| uint64_t st_ctime_nsec_; |
| int64_t __unused[3]; |
| }; |
| #elif defined(__PPC__) |
| struct kernel_stat { |
| unsigned st_dev; |
| unsigned long st_ino; // ino_t |
| unsigned long st_mode; // mode_t |
| unsigned short st_nlink; // nlink_t |
| unsigned st_uid; // uid_t |
| unsigned st_gid; // gid_t |
| unsigned st_rdev; |
| long st_size; // off_t |
| unsigned long st_blksize; |
| unsigned long st_blocks; |
| unsigned long st_atime_; |
| unsigned long st_atime_nsec_; |
| unsigned long st_mtime_; |
| unsigned long st_mtime_nsec_; |
| unsigned long st_ctime_; |
| unsigned long st_ctime_nsec_; |
| unsigned long __unused4; |
| unsigned long __unused5; |
| }; |
| #elif (defined(__mips__) && _MIPS_SIM != _MIPS_SIM_ABI64) |
| struct kernel_stat { |
| unsigned st_dev; |
| int st_pad1[3]; |
| unsigned st_ino; |
| unsigned st_mode; |
| unsigned st_nlink; |
| unsigned st_uid; |
| unsigned st_gid; |
| unsigned st_rdev; |
| int st_pad2[2]; |
| long st_size; |
| int st_pad3; |
| long st_atime_; |
| long st_atime_nsec_; |
| long st_mtime_; |
| long st_mtime_nsec_; |
| long st_ctime_; |
| long st_ctime_nsec_; |
| int st_blksize; |
| int st_blocks; |
| int st_pad4[14]; |
| }; |
| #endif |
| |
| // ulong is not defined in Android while used to define __llseek. |
| #if defined(__ANDROID__) |
| typedef unsigned long int ulong; |
| #endif |
| |
| |
| /* Definitions missing from the standard header files */ |
| #ifndef O_DIRECTORY |
| #if defined(__arm__) |
| #define O_DIRECTORY 0040000 |
| #else |
| #define O_DIRECTORY 0200000 |
| #endif |
| #endif |
| #ifndef PR_GET_DUMPABLE |
| #define PR_GET_DUMPABLE 3 |
| #endif |
| #ifndef PR_SET_DUMPABLE |
| #define PR_SET_DUMPABLE 4 |
| #endif |
| #ifndef AT_FDCWD |
| #define AT_FDCWD (-100) |
| #endif |
| #ifndef AT_SYMLINK_NOFOLLOW |
| #define AT_SYMLINK_NOFOLLOW 0x100 |
| #endif |
| #ifndef AT_REMOVEDIR |
| #define AT_REMOVEDIR 0x200 |
| #endif |
| #ifndef MREMAP_FIXED |
| #define MREMAP_FIXED 2 |
| #endif |
| #ifndef SA_RESTORER |
| #define SA_RESTORER 0x04000000 |
| #endif |
| |
| #if defined(__i386__) |
| #ifndef __NR_rt_sigaction |
| #define __NR_rt_sigaction 174 |
| #define __NR_rt_sigprocmask 175 |
| #endif |
| #ifndef __NR_stat64 |
| #define __NR_stat64 195 |
| #endif |
| #ifndef __NR_fstat64 |
| #define __NR_fstat64 197 |
| #endif |
| #ifndef __NR_getdents64 |
| #define __NR_getdents64 220 |
| #endif |
| #ifndef __NR_gettid |
| #define __NR_gettid 224 |
| #endif |
| #ifndef __NR_futex |
| #define __NR_futex 240 |
| #endif |
| #ifndef __NR_openat |
| #define __NR_openat 295 |
| #endif |
| #ifndef __NR_getcpu |
| #define __NR_getcpu 318 |
| #endif |
| /* End of i386 definitions */ |
| #elif defined(__arm__) |
| #ifndef __syscall |
| #if defined(__thumb__) || defined(__ARM_EABI__) |
| #define __SYS_REG(name) register long __sysreg __asm__("r6") = __NR_##name; |
| #define __SYS_REG_LIST(regs...) [sysreg] "r" (__sysreg) , ##regs |
| #define __syscall(name) "swi\t0" |
| #define __syscall_safe(name) \ |
| "push {r7}\n" \ |
| "mov r7,%[sysreg]\n" \ |
| __syscall(name)"\n" \ |
| "pop {r7}" |
| #else |
| #define __SYS_REG(name) |
| #define __SYS_REG_LIST(regs...) regs |
| #define __syscall(name) "swi\t" __sys1(__NR_##name) "" |
| #define __syscall_safe(name) __syscall(name) |
| #endif |
| #endif |
| #ifndef __NR_rt_sigaction |
| #define __NR_rt_sigaction (__NR_SYSCALL_BASE + 174) |
| #define __NR_rt_sigprocmask (__NR_SYSCALL_BASE + 175) |
| #endif |
| #ifndef __NR_stat64 |
| #define __NR_stat64 (__NR_SYSCALL_BASE + 195) |
| #endif |
| #ifndef __NR_fstat64 |
| #define __NR_fstat64 (__NR_SYSCALL_BASE + 197) |
| #endif |
| #ifndef __NR_getdents64 |
| #define __NR_getdents64 (__NR_SYSCALL_BASE + 217) |
| #endif |
| #ifndef __NR_gettid |
| #define __NR_gettid (__NR_SYSCALL_BASE + 224) |
| #endif |
| #ifndef __NR_futex |
| #define __NR_futex (__NR_SYSCALL_BASE + 240) |
| #endif |
| /* End of ARM definitions */ |
| #elif defined(__x86_64__) |
| #ifndef __NR_gettid |
| #define __NR_gettid 186 |
| #endif |
| #ifndef __NR_futex |
| #define __NR_futex 202 |
| #endif |
| #ifndef __NR_getdents64 |
| #define __NR_getdents64 217 |
| #endif |
| #ifndef __NR_openat |
| #define __NR_openat 257 |
| #endif |
| /* End of x86-64 definitions */ |
| #elif defined(__mips__) |
| #if _MIPS_SIM == _MIPS_SIM_ABI32 |
| #ifndef __NR_rt_sigaction |
| #define __NR_rt_sigaction (__NR_Linux + 194) |
| #define __NR_rt_sigprocmask (__NR_Linux + 195) |
| #endif |
| #ifndef __NR_stat64 |
| #define __NR_stat64 (__NR_Linux + 213) |
| #endif |
| #ifndef __NR_fstat64 |
| #define __NR_fstat64 (__NR_Linux + 215) |
| #endif |
| #ifndef __NR_getdents64 |
| #define __NR_getdents64 (__NR_Linux + 219) |
| #endif |
| #ifndef __NR_gettid |
| #define __NR_gettid (__NR_Linux + 222) |
| #endif |
| #ifndef __NR_futex |
| #define __NR_futex (__NR_Linux + 238) |
| #endif |
| #ifndef __NR_openat |
| #define __NR_openat (__NR_Linux + 288) |
| #endif |
| #ifndef __NR_fstatat |
| #define __NR_fstatat (__NR_Linux + 293) |
| #endif |
| #ifndef __NR_getcpu |
| #define __NR_getcpu (__NR_Linux + 312) |
| #endif |
| /* End of MIPS (old 32bit API) definitions */ |
| #elif _MIPS_SIM == _MIPS_SIM_ABI64 |
| #ifndef __NR_gettid |
| #define __NR_gettid (__NR_Linux + 178) |
| #endif |
| #ifndef __NR_futex |
| #define __NR_futex (__NR_Linux + 194) |
| #endif |
| #ifndef __NR_openat |
| #define __NR_openat (__NR_Linux + 247) |
| #endif |
| #ifndef __NR_fstatat |
| #define __NR_fstatat (__NR_Linux + 252) |
| #endif |
| #ifndef __NR_getcpu |
| #define __NR_getcpu (__NR_Linux + 271) |
| #endif |
| /* End of MIPS (64bit API) definitions */ |
| #else |
| #ifndef __NR_gettid |
| #define __NR_gettid (__NR_Linux + 178) |
| #endif |
| #ifndef __NR_futex |
| #define __NR_futex (__NR_Linux + 194) |
| #endif |
| #ifndef __NR_openat |
| #define __NR_openat (__NR_Linux + 251) |
| #endif |
| #ifndef __NR_fstatat |
| #define __NR_fstatat (__NR_Linux + 256) |
| #endif |
| #ifndef __NR_getcpu |
| #define __NR_getcpu (__NR_Linux + 275) |
| #endif |
| /* End of MIPS (new 32bit API) definitions */ |
| #endif |
| /* End of MIPS definitions */ |
| #elif defined(__PPC__) |
| #ifndef __NR_rt_sigaction |
| #define __NR_rt_sigaction 173 |
| #define __NR_rt_sigprocmask 174 |
| #endif |
| #ifndef __NR_stat64 |
| #define __NR_stat64 195 |
| #endif |
| #ifndef __NR_fstat64 |
| #define __NR_fstat64 197 |
| #endif |
| #ifndef __NR_getdents64 |
| #define __NR_getdents64 202 |
| #endif |
| #ifndef __NR_gettid |
| #define __NR_gettid 207 |
| #endif |
| #ifndef __NR_futex |
| #define __NR_futex 221 |
| #endif |
| #ifndef __NR_openat |
| #define __NR_openat 286 |
| #endif |
| #ifndef __NR_getcpu |
| #define __NR_getcpu 302 |
| #endif |
| /* End of powerpc defininitions */ |
| #endif |
| |
| |
| /* After forking, we must make sure to only call system calls. */ |
| #if __BOUNDED_POINTERS__ |
| #error "Need to port invocations of syscalls for bounded ptrs" |
| #else |
| /* The core dumper and the thread lister get executed after threads |
| * have been suspended. As a consequence, we cannot call any functions |
| * that acquire locks. Unfortunately, libc wraps most system calls |
| * (e.g. in order to implement pthread_atfork, and to make calls |
| * cancellable), which means we cannot call these functions. Instead, |
| * we have to call syscall() directly. |
| */ |
| #undef LSS_ERRNO |
| #ifdef SYS_ERRNO |
| /* Allow the including file to override the location of errno. This can |
| * be useful when using clone() with the CLONE_VM option. |
| */ |
| #define LSS_ERRNO SYS_ERRNO |
| #else |
| #define LSS_ERRNO errno |
| #endif |
| |
| #undef LSS_INLINE |
| #ifdef SYS_INLINE |
| #define LSS_INLINE SYS_INLINE |
| #else |
| #define LSS_INLINE static inline |
| #endif |
| |
| /* Allow the including file to override the prefix used for all new |
| * system calls. By default, it will be set to "sys_". |
| */ |
| #undef LSS_NAME |
| #ifndef SYS_PREFIX |
| #define LSS_NAME(name) sys_##name |
| #elif SYS_PREFIX < 0 |
| #define LSS_NAME(name) name |
| #elif SYS_PREFIX == 0 |
| #define LSS_NAME(name) sys0_##name |
| #elif SYS_PREFIX == 1 |
| #define LSS_NAME(name) sys1_##name |
| #elif SYS_PREFIX == 2 |
| #define LSS_NAME(name) sys2_##name |
| #elif SYS_PREFIX == 3 |
| #define LSS_NAME(name) sys3_##name |
| #elif SYS_PREFIX == 4 |
| #define LSS_NAME(name) sys4_##name |
| #elif SYS_PREFIX == 5 |
| #define LSS_NAME(name) sys5_##name |
| #elif SYS_PREFIX == 6 |
| #define LSS_NAME(name) sys6_##name |
| #elif SYS_PREFIX == 7 |
| #define LSS_NAME(name) sys7_##name |
| #elif SYS_PREFIX == 8 |
| #define LSS_NAME(name) sys8_##name |
| #elif SYS_PREFIX == 9 |
| #define LSS_NAME(name) sys9_##name |
| #endif |
| |
| #undef LSS_RETURN |
| #if (defined(__i386__) || defined(__x86_64__) || defined(__arm__)) |
| /* Failing system calls return a negative result in the range of |
| * -1..-4095. These are "errno" values with the sign inverted. |
| */ |
| #define LSS_RETURN(type, res) \ |
| do { \ |
| if ((unsigned long)(res) >= (unsigned long)(-4095)) { \ |
| LSS_ERRNO = -(res); \ |
| res = -1; \ |
| } \ |
| return (type) (res); \ |
| } while (0) |
| #elif defined(__mips__) |
| /* On MIPS, failing system calls return -1, and set errno in a |
| * separate CPU register. |
| */ |
| #define LSS_RETURN(type, res, err) \ |
| do { \ |
| if (err) { \ |
| LSS_ERRNO = (res); \ |
| res = -1; \ |
| } \ |
| return (type) (res); \ |
| } while (0) |
| #elif defined(__PPC__) |
| /* On PPC, failing system calls return -1, and set errno in a |
| * separate CPU register. See linux/unistd.h. |
| */ |
| #define LSS_RETURN(type, res, err) \ |
| do { \ |
| if (err & 0x10000000 ) { \ |
| LSS_ERRNO = (res); \ |
| res = -1; \ |
| } \ |
| return (type) (res); \ |
| } while (0) |
| #endif |
| #if defined(__i386__) |
| #if defined(NO_FRAME_POINTER) && (100 * __GNUC__ + __GNUC_MINOR__ >= 404) |
| /* This only works for GCC-4.4 and above -- the first version to use |
| .cfi directives for dwarf unwind info. */ |
| #define CFI_ADJUST_CFA_OFFSET(adjust) \ |
| ".cfi_adjust_cfa_offset " #adjust "\n" |
| #else |
| #define CFI_ADJUST_CFA_OFFSET(adjust) /**/ |
| #endif |
| |
| /* In PIC mode (e.g. when building shared libraries), gcc for i386 |
| * reserves ebx. Unfortunately, most distribution ship with implementations |
| * of _syscallX() which clobber ebx. |
| * Also, most definitions of _syscallX() neglect to mark "memory" as being |
| * clobbered. This causes problems with compilers, that do a better job |
| * at optimizing across __asm__ calls. |
| * So, we just have to redefine all of the _syscallX() macros. |
| */ |
| #undef LSS_BODY |
| #define LSS_BODY(type,args...) \ |
| long __res; \ |
| __asm__ __volatile__("push %%ebx\n" \ |
| CFI_ADJUST_CFA_OFFSET(4) \ |
| "movl %2,%%ebx\n" \ |
| "int $0x80\n" \ |
| "pop %%ebx\n" \ |
| CFI_ADJUST_CFA_OFFSET(-4) \ |
| args \ |
| : "esp", "memory"); \ |
| LSS_RETURN(type,__res) |
| #undef _syscall0 |
| #define _syscall0(type,name) \ |
| type LSS_NAME(name)(void) { \ |
| long __res; \ |
| __asm__ volatile("int $0x80" \ |
| : "=a" (__res) \ |
| : "0" (__NR_##name) \ |
| : "memory"); \ |
| LSS_RETURN(type,__res); \ |
| } |
| #undef _syscall1 |
| #define _syscall1(type,name,type1,arg1) \ |
| type LSS_NAME(name)(type1 arg1) { \ |
| LSS_BODY(type, \ |
| : "=a" (__res) \ |
| : "0" (__NR_##name), "ri" ((long)(arg1))); \ |
| } |
| #undef _syscall2 |
| #define _syscall2(type,name,type1,arg1,type2,arg2) \ |
| type LSS_NAME(name)(type1 arg1,type2 arg2) { \ |
| LSS_BODY(type, \ |
| : "=a" (__res) \ |
| : "0" (__NR_##name),"ri" ((long)(arg1)), "c" ((long)(arg2))); \ |
| } |
| #undef _syscall3 |
| #define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \ |
| type LSS_NAME(name)(type1 arg1,type2 arg2,type3 arg3) { \ |
| LSS_BODY(type, \ |
| : "=a" (__res) \ |
| : "0" (__NR_##name), "ri" ((long)(arg1)), "c" ((long)(arg2)), \ |
| "d" ((long)(arg3))); \ |
| } |
| #undef _syscall4 |
| #define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3, type4 arg4) { \ |
| LSS_BODY(type, \ |
| : "=a" (__res) \ |
| : "0" (__NR_##name), "ri" ((long)(arg1)), "c" ((long)(arg2)), \ |
| "d" ((long)(arg3)),"S" ((long)(arg4))); \ |
| } |
| #undef _syscall5 |
| #define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ |
| type5,arg5) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3, type4 arg4, \ |
| type5 arg5) { \ |
| long __res; \ |
| __asm__ __volatile__("push %%ebx\n" \ |
| "movl %2,%%ebx\n" \ |
| "movl %1,%%eax\n" \ |
| "int $0x80\n" \ |
| "pop %%ebx" \ |
| : "=a" (__res) \ |
| : "i" (__NR_##name), "ri" ((long)(arg1)), \ |
| "c" ((long)(arg2)), "d" ((long)(arg3)), \ |
| "S" ((long)(arg4)), "D" ((long)(arg5)) \ |
| : "esp", "memory"); \ |
| LSS_RETURN(type,__res); \ |
| } |
| #undef _syscall6 |
| #define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ |
| type5,arg5,type6,arg6) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3, type4 arg4, \ |
| type5 arg5, type6 arg6) { \ |
| long __res; \ |
| struct { long __a1; long __a6; } __s = { (long)arg1, (long) arg6 }; \ |
| __asm__ __volatile__("push %%ebp\n" \ |
| "push %%ebx\n" \ |
| "movl 4(%2),%%ebp\n" \ |
| "movl 0(%2), %%ebx\n" \ |
| "movl %1,%%eax\n" \ |
| "int $0x80\n" \ |
| "pop %%ebx\n" \ |
| "pop %%ebp" \ |
| : "=a" (__res) \ |
| : "i" (__NR_##name), "0" ((long)(&__s)), \ |
| "c" ((long)(arg2)), "d" ((long)(arg3)), \ |
| "S" ((long)(arg4)), "D" ((long)(arg5)) \ |
| : "esp", "memory"); \ |
| LSS_RETURN(type,__res); \ |
| } |
| LSS_INLINE int LSS_NAME(clone)(int (*fn)(void *), void *child_stack, |
| int flags, void *arg, int *parent_tidptr, |
| void *newtls, int *child_tidptr) { |
| long __res; |
| __asm__ __volatile__(/* if (fn == NULL) |
| * return -EINVAL; |
| */ |
| "movl %3,%%ecx\n" |
| "jecxz 1f\n" |
| |
| /* if (child_stack == NULL) |
| * return -EINVAL; |
| */ |
| "movl %4,%%ecx\n" |
| "jecxz 1f\n" |
| |
| /* Set up alignment of the child stack: |
| * child_stack = (child_stack & ~0xF) - 20; |
| */ |
| "andl $-16,%%ecx\n" |
| "subl $20,%%ecx\n" |
| |
| /* Push "arg" and "fn" onto the stack that will be |
| * used by the child. |
| */ |
| "movl %6,%%eax\n" |
| "movl %%eax,4(%%ecx)\n" |
| "movl %3,%%eax\n" |
| "movl %%eax,(%%ecx)\n" |
| |
| /* %eax = syscall(%eax = __NR_clone, |
| * %ebx = flags, |
| * %ecx = child_stack, |
| * %edx = parent_tidptr, |
| * %esi = newtls, |
| * %edi = child_tidptr) |
| * Also, make sure that %ebx gets preserved as it is |
| * used in PIC mode. |
| */ |
| "movl %8,%%esi\n" |
| "movl %7,%%edx\n" |
| "movl %5,%%eax\n" |
| "movl %9,%%edi\n" |
| "pushl %%ebx\n" |
| "movl %%eax,%%ebx\n" |
| "movl %2,%%eax\n" |
| "int $0x80\n" |
| |
| /* In the parent: restore %ebx |
| * In the child: move "fn" into %ebx |
| */ |
| "popl %%ebx\n" |
| |
| /* if (%eax != 0) |
| * return %eax; |
| */ |
| "test %%eax,%%eax\n" |
| "jnz 1f\n" |
| |
| /* In the child, now. Terminate frame pointer chain. |
| */ |
| "movl $0,%%ebp\n" |
| |
| /* Call "fn". "arg" is already on the stack. |
| */ |
| "call *%%ebx\n" |
| |
| /* Call _exit(%ebx). Unfortunately older versions |
| * of gcc restrict the number of arguments that can |
| * be passed to asm(). So, we need to hard-code the |
| * system call number. |
| */ |
| "movl %%eax,%%ebx\n" |
| "movl $1,%%eax\n" |
| "int $0x80\n" |
| |
| /* Return to parent. |
| */ |
| "1:\n" |
| : "=a" (__res) |
| : "0"(-EINVAL), "i"(__NR_clone), |
| "m"(fn), "m"(child_stack), "m"(flags), "m"(arg), |
| "m"(parent_tidptr), "m"(newtls), "m"(child_tidptr) |
| : "esp", "memory", "ecx", "edx", "esi", "edi"); |
| LSS_RETURN(int, __res); |
| } |
| |
| LSS_INLINE void (*LSS_NAME(restore_rt)(void))(void) { |
| /* On i386, the kernel does not know how to return from a signal |
| * handler. Instead, it relies on user space to provide a |
| * restorer function that calls the {rt_,}sigreturn() system call. |
| * Unfortunately, we cannot just reference the glibc version of this |
| * function, as glibc goes out of its way to make it inaccessible. |
| */ |
| void (*res)(void); |
| __asm__ __volatile__("call 2f\n" |
| "0:.align 16\n" |
| "1:movl %1,%%eax\n" |
| "int $0x80\n" |
| "2:popl %0\n" |
| "addl $(1b-0b),%0\n" |
| : "=a" (res) |
| : "i" (__NR_rt_sigreturn)); |
| return res; |
| } |
| LSS_INLINE void (*LSS_NAME(restore)(void))(void) { |
| /* On i386, the kernel does not know how to return from a signal |
| * handler. Instead, it relies on user space to provide a |
| * restorer function that calls the {rt_,}sigreturn() system call. |
| * Unfortunately, we cannot just reference the glibc version of this |
| * function, as glibc goes out of its way to make it inaccessible. |
| */ |
| void (*res)(void); |
| __asm__ __volatile__("call 2f\n" |
| "0:.align 16\n" |
| "1:pop %%eax\n" |
| "movl %1,%%eax\n" |
| "int $0x80\n" |
| "2:popl %0\n" |
| "addl $(1b-0b),%0\n" |
| : "=a" (res) |
| : "i" (__NR_sigreturn)); |
| return res; |
| } |
| #elif defined(__x86_64__) |
| /* There are no known problems with any of the _syscallX() macros |
| * currently shipping for x86_64, but we still need to be able to define |
| * our own version so that we can override the location of the errno |
| * location (e.g. when using the clone() system call with the CLONE_VM |
| * option). |
| */ |
| #undef LSS_ENTRYPOINT |
| #define LSS_ENTRYPOINT "syscall\n" |
| |
| /* The x32 ABI has 32 bit longs, but the syscall interface is 64 bit. |
| * We need to explicitly cast to an unsigned 64 bit type to avoid implicit |
| * sign extension. We can't cast pointers directly because those are |
| * 32 bits, and gcc will dump ugly warnings about casting from a pointer |
| * to an integer of a different size. |
| */ |
| #undef LSS_SYSCALL_ARG |
| #define LSS_SYSCALL_ARG(a) ((uint64_t)(uintptr_t)(a)) |
| #undef _LSS_RETURN |
| #define _LSS_RETURN(type, res, cast) \ |
| do { \ |
| if ((uint64_t)(res) >= (uint64_t)(-4095)) { \ |
| LSS_ERRNO = -(res); \ |
| res = -1; \ |
| } \ |
| return (type)(cast)(res); \ |
| } while (0) |
| #undef LSS_RETURN |
| #define LSS_RETURN(type, res) _LSS_RETURN(type, res, uintptr_t) |
| |
| #undef _LSS_BODY |
| #define _LSS_BODY(nr, type, name, cast, ...) \ |
| long long __res; \ |
| __asm__ __volatile__(LSS_BODY_ASM##nr LSS_ENTRYPOINT \ |
| : "=a" (__res) \ |
| : "0" (__NR_##name) LSS_BODY_ARG##nr(__VA_ARGS__) \ |
| : LSS_BODY_CLOBBER##nr "r11", "rcx", "memory"); \ |
| _LSS_RETURN(type, __res, cast) |
| #undef LSS_BODY |
| #define LSS_BODY(nr, type, name, args...) \ |
| _LSS_BODY(nr, type, name, uintptr_t, ## args) |
| |
| #undef LSS_BODY_ASM0 |
| #undef LSS_BODY_ASM1 |
| #undef LSS_BODY_ASM2 |
| #undef LSS_BODY_ASM3 |
| #undef LSS_BODY_ASM4 |
| #undef LSS_BODY_ASM5 |
| #undef LSS_BODY_ASM6 |
| #define LSS_BODY_ASM0 |
| #define LSS_BODY_ASM1 LSS_BODY_ASM0 |
| #define LSS_BODY_ASM2 LSS_BODY_ASM1 |
| #define LSS_BODY_ASM3 LSS_BODY_ASM2 |
| #define LSS_BODY_ASM4 LSS_BODY_ASM3 "movq %5,%%r10;" |
| #define LSS_BODY_ASM5 LSS_BODY_ASM4 "movq %6,%%r8;" |
| #define LSS_BODY_ASM6 LSS_BODY_ASM5 "movq %7,%%r9;" |
| |
| #undef LSS_BODY_CLOBBER0 |
| #undef LSS_BODY_CLOBBER1 |
| #undef LSS_BODY_CLOBBER2 |
| #undef LSS_BODY_CLOBBER3 |
| #undef LSS_BODY_CLOBBER4 |
| #undef LSS_BODY_CLOBBER5 |
| #undef LSS_BODY_CLOBBER6 |
| #define LSS_BODY_CLOBBER0 |
| #define LSS_BODY_CLOBBER1 LSS_BODY_CLOBBER0 |
| #define LSS_BODY_CLOBBER2 LSS_BODY_CLOBBER1 |
| #define LSS_BODY_CLOBBER3 LSS_BODY_CLOBBER2 |
| #define LSS_BODY_CLOBBER4 LSS_BODY_CLOBBER3 "r10", |
| #define LSS_BODY_CLOBBER5 LSS_BODY_CLOBBER4 "r8", |
| #define LSS_BODY_CLOBBER6 LSS_BODY_CLOBBER5 "r9", |
| |
| #undef LSS_BODY_ARG0 |
| #undef LSS_BODY_ARG1 |
| #undef LSS_BODY_ARG2 |
| #undef LSS_BODY_ARG3 |
| #undef LSS_BODY_ARG4 |
| #undef LSS_BODY_ARG5 |
| #undef LSS_BODY_ARG6 |
| #define LSS_BODY_ARG0() |
| #define LSS_BODY_ARG1(arg1) \ |
| LSS_BODY_ARG0(), "D" (arg1) |
| #define LSS_BODY_ARG2(arg1, arg2) \ |
| LSS_BODY_ARG1(arg1), "S" (arg2) |
| #define LSS_BODY_ARG3(arg1, arg2, arg3) \ |
| LSS_BODY_ARG2(arg1, arg2), "d" (arg3) |
| #define LSS_BODY_ARG4(arg1, arg2, arg3, arg4) \ |
| LSS_BODY_ARG3(arg1, arg2, arg3), "r" (arg4) |
| #define LSS_BODY_ARG5(arg1, arg2, arg3, arg4, arg5) \ |
| LSS_BODY_ARG4(arg1, arg2, arg3, arg4), "r" (arg5) |
| #define LSS_BODY_ARG6(arg1, arg2, arg3, arg4, arg5, arg6) \ |
| LSS_BODY_ARG5(arg1, arg2, arg3, arg4, arg5), "r" (arg6) |
| |
| #undef _syscall0 |
| #define _syscall0(type,name) \ |
| type LSS_NAME(name)() { \ |
| LSS_BODY(0, type, name); \ |
| } |
| #undef _syscall1 |
| #define _syscall1(type,name,type1,arg1) \ |
| type LSS_NAME(name)(type1 arg1) { \ |
| LSS_BODY(1, type, name, LSS_SYSCALL_ARG(arg1)); \ |
| } |
| #undef _syscall2 |
| #define _syscall2(type,name,type1,arg1,type2,arg2) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2) { \ |
| LSS_BODY(2, type, name, LSS_SYSCALL_ARG(arg1), LSS_SYSCALL_ARG(arg2));\ |
| } |
| #undef _syscall3 |
| #define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3) { \ |
| LSS_BODY(3, type, name, LSS_SYSCALL_ARG(arg1), LSS_SYSCALL_ARG(arg2), \ |
| LSS_SYSCALL_ARG(arg3)); \ |
| } |
| #undef _syscall4 |
| #define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3, type4 arg4) { \ |
| LSS_BODY(4, type, name, LSS_SYSCALL_ARG(arg1), LSS_SYSCALL_ARG(arg2), \ |
| LSS_SYSCALL_ARG(arg3), LSS_SYSCALL_ARG(arg4));\ |
| } |
| #undef _syscall5 |
| #define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ |
| type5,arg5) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3, type4 arg4, \ |
| type5 arg5) { \ |
| LSS_BODY(5, type, name, LSS_SYSCALL_ARG(arg1), LSS_SYSCALL_ARG(arg2), \ |
| LSS_SYSCALL_ARG(arg3), LSS_SYSCALL_ARG(arg4), \ |
| LSS_SYSCALL_ARG(arg5)); \ |
| } |
| #undef _syscall6 |
| #define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ |
| type5,arg5,type6,arg6) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3, type4 arg4, \ |
| type5 arg5, type6 arg6) { \ |
| LSS_BODY(6, type, name, LSS_SYSCALL_ARG(arg1), LSS_SYSCALL_ARG(arg2), \ |
| LSS_SYSCALL_ARG(arg3), LSS_SYSCALL_ARG(arg4), \ |
| LSS_SYSCALL_ARG(arg5), LSS_SYSCALL_ARG(arg6));\ |
| } |
| LSS_INLINE int LSS_NAME(clone)(int (*fn)(void *), void *child_stack, |
| int flags, void *arg, int *parent_tidptr, |
| void *newtls, int *child_tidptr) { |
| long long __res; |
| { |
| __asm__ __volatile__(/* if (fn == NULL) |
| * return -EINVAL; |
| */ |
| "testq %4,%4\n" |
| "jz 1f\n" |
| |
| /* if (child_stack == NULL) |
| * return -EINVAL; |
| */ |
| "testq %5,%5\n" |
| "jz 1f\n" |
| |
| /* Set up alignment of the child stack: |
| * child_stack = (child_stack & ~0xF) - 16; |
| */ |
| "andq $-16,%5\n" |
| "subq $16,%5\n" |
| |
| /* Push "arg" and "fn" onto the stack that will be |
| * used by the child. |
| */ |
| "movq %7,8(%5)\n" |
| "movq %4,0(%5)\n" |
| |
| /* %rax = syscall(%rax = __NR_clone, |
| * %rdi = flags, |
| * %rsi = child_stack, |
| * %rdx = parent_tidptr, |
| * %r8 = new_tls, |
| * %r10 = child_tidptr) |
| */ |
| "movq %2,%%rax\n" |
| "movq %9,%%r8\n" |
| "movq %10,%%r10\n" |
| "syscall\n" |
| |
| /* if (%rax != 0) |
| * return; |
| */ |
| "testq %%rax,%%rax\n" |
| "jnz 1f\n" |
| |
| /* In the child. Terminate frame pointer chain. |
| */ |
| "xorq %%rbp,%%rbp\n" |
| |
| /* Call "fn(arg)". |
| */ |
| "popq %%rax\n" |
| "popq %%rdi\n" |
| "call *%%rax\n" |
| |
| /* Call _exit(%ebx). |
| */ |
| "movq %%rax,%%rdi\n" |
| "movq %3,%%rax\n" |
| "syscall\n" |
| |
| /* Return to parent. |
| */ |
| "1:\n" |
| : "=a" (__res) |
| : "0"(-EINVAL), "i"(__NR_clone), "i"(__NR_exit), |
| "r"(LSS_SYSCALL_ARG(fn)), |
| "S"(LSS_SYSCALL_ARG(child_stack)), |
| "D"(LSS_SYSCALL_ARG(flags)), |
| "r"(LSS_SYSCALL_ARG(arg)), |
| "d"(LSS_SYSCALL_ARG(parent_tidptr)), |
| "r"(LSS_SYSCALL_ARG(newtls)), |
| "r"(LSS_SYSCALL_ARG(child_tidptr)) |
| : "rsp", "memory", "r8", "r10", "r11", "rcx"); |
| } |
| LSS_RETURN(int, __res); |
| } |
| |
| LSS_INLINE void (*LSS_NAME(restore_rt)(void))(void) { |
| /* On x86-64, the kernel does not know how to return from |
| * a signal handler. Instead, it relies on user space to provide a |
| * restorer function that calls the rt_sigreturn() system call. |
| * Unfortunately, we cannot just reference the glibc version of this |
| * function, as glibc goes out of its way to make it inaccessible. |
| */ |
| long long res; |
| __asm__ __volatile__("call 2f\n" |
| "0:.align 16\n" |
| "1:movq %1,%%rax\n" |
| "syscall\n" |
| "2:popq %0\n" |
| "addq $(1b-0b),%0\n" |
| : "=a" (res) |
| : "i" (__NR_rt_sigreturn)); |
| return (void (*)(void))(uintptr_t)res; |
| } |
| #elif defined(__arm__) |
| /* Most definitions of _syscallX() neglect to mark "memory" as being |
| * clobbered. This causes problems with compilers, that do a better job |
| * at optimizing across __asm__ calls. |
| * So, we just have to redefine all fo the _syscallX() macros. |
| */ |
| #undef LSS_REG |
| #define LSS_REG(r,a) register long __r##r __asm__("r"#r) = (long)a |
| |
| /* r0..r3 are scratch registers and not preserved across function |
| * calls. We need to first evaluate the first 4 syscall arguments |
| * and store them on stack. They must be loaded into r0..r3 after |
| * all function calls to avoid r0..r3 being clobbered. |
| */ |
| #undef LSS_SAVE_ARG |
| #define LSS_SAVE_ARG(r,a) long __tmp##r = (long)a |
| #undef LSS_LOAD_ARG |
| #define LSS_LOAD_ARG(r) register long __r##r __asm__("r"#r) = __tmp##r |
| |
| #undef LSS_BODY |
| #define LSS_BODY(type, name, args...) \ |
| register long __res_r0 __asm__("r0"); \ |
| long __res; \ |
| __SYS_REG(name) \ |
| __asm__ __volatile__ (__syscall_safe(name) \ |
| : "=r"(__res_r0) \ |
| : __SYS_REG_LIST(args) \ |
| : "lr", "memory"); \ |
| __res = __res_r0; \ |
| LSS_RETURN(type, __res) |
| #undef _syscall0 |
| #define _syscall0(type, name) \ |
| type LSS_NAME(name)() { \ |
| LSS_BODY(type, name); \ |
| } |
| #undef _syscall1 |
| #define _syscall1(type, name, type1, arg1) \ |
| type LSS_NAME(name)(type1 arg1) { \ |
| /* There is no need for using a volatile temp. */ \ |
| LSS_REG(0, arg1); \ |
| LSS_BODY(type, name, "r"(__r0)); \ |
| } |
| #undef _syscall2 |
| #define _syscall2(type, name, type1, arg1, type2, arg2) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2) { \ |
| LSS_SAVE_ARG(0, arg1); \ |
| LSS_SAVE_ARG(1, arg2); \ |
| LSS_LOAD_ARG(0); \ |
| LSS_LOAD_ARG(1); \ |
| LSS_BODY(type, name, "r"(__r0), "r"(__r1)); \ |
| } |
| #undef _syscall3 |
| #define _syscall3(type, name, type1, arg1, type2, arg2, type3, arg3) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3) { \ |
| LSS_SAVE_ARG(0, arg1); \ |
| LSS_SAVE_ARG(1, arg2); \ |
| LSS_SAVE_ARG(2, arg3); \ |
| LSS_LOAD_ARG(0); \ |
| LSS_LOAD_ARG(1); \ |
| LSS_LOAD_ARG(2); \ |
| LSS_BODY(type, name, "r"(__r0), "r"(__r1), "r"(__r2)); \ |
| } |
| #undef _syscall4 |
| #define _syscall4(type, name, type1, arg1, type2, arg2, type3, arg3, \ |
| type4, arg4) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3, type4 arg4) { \ |
| LSS_SAVE_ARG(0, arg1); \ |
| LSS_SAVE_ARG(1, arg2); \ |
| LSS_SAVE_ARG(2, arg3); \ |
| LSS_SAVE_ARG(3, arg4); \ |
| LSS_LOAD_ARG(0); \ |
| LSS_LOAD_ARG(1); \ |
| LSS_LOAD_ARG(2); \ |
| LSS_LOAD_ARG(3); \ |
| LSS_BODY(type, name, "r"(__r0), "r"(__r1), "r"(__r2), "r"(__r3)); \ |
| } |
| #undef _syscall5 |
| #define _syscall5(type, name, type1, arg1, type2, arg2, type3, arg3, \ |
| type4, arg4, type5, arg5) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3, type4 arg4, \ |
| type5 arg5) { \ |
| LSS_SAVE_ARG(0, arg1); \ |
| LSS_SAVE_ARG(1, arg2); \ |
| LSS_SAVE_ARG(2, arg3); \ |
| LSS_SAVE_ARG(3, arg4); \ |
| LSS_REG(4, arg5); \ |
| LSS_LOAD_ARG(0); \ |
| LSS_LOAD_ARG(1); \ |
| LSS_LOAD_ARG(2); \ |
| LSS_LOAD_ARG(3); \ |
| LSS_BODY(type, name, "r"(__r0), "r"(__r1), "r"(__r2), "r"(__r3), \ |
| "r"(__r4)); \ |
| } |
| #undef _syscall6 |
| #define _syscall6(type, name, type1, arg1, type2, arg2, type3, arg3, \ |
| type4, arg4, type5, arg5, type6, arg6) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3, type4 arg4, \ |
| type5 arg5, type6 arg6) { \ |
| LSS_SAVE_ARG(0, arg1); \ |
| LSS_SAVE_ARG(1, arg2); \ |
| LSS_SAVE_ARG(2, arg3); \ |
| LSS_SAVE_ARG(3, arg4); \ |
| LSS_REG(4, arg5); \ |
| LSS_REG(5, arg6); \ |
| LSS_LOAD_ARG(0); \ |
| LSS_LOAD_ARG(1); \ |
| LSS_LOAD_ARG(2); \ |
| LSS_LOAD_ARG(3); \ |
| LSS_BODY(type, name, "r"(__r0), "r"(__r1), "r"(__r2), "r"(__r3), \ |
| "r"(__r4), "r"(__r5)); \ |
| } |
| LSS_INLINE int LSS_NAME(clone)(int (*fn)(void *), void *child_stack, |
| int flags, void *arg, int *parent_tidptr, |
| void *newtls, int *child_tidptr) { |
| register long __res __asm__("r5"); |
| { |
| if (fn == NULL || child_stack == NULL) { |
| __res = -EINVAL; |
| goto clone_exit; |
| } |
| |
| /* stash first 4 arguments on stack first because we can only load |
| * them after all function calls. |
| */ |
| int tmp_flags = flags; |
| int * tmp_stack = (int*) child_stack; |
| void * tmp_ptid = parent_tidptr; |
| void * tmp_tls = newtls; |
| |
| register int *__ctid __asm__("r4") = child_tidptr; |
| |
| /* Push "arg" and "fn" onto the stack that will be |
| * used by the child. |
| */ |
| *(--tmp_stack) = (int) arg; |
| *(--tmp_stack) = (int) fn; |
| |
| /* We must load r0..r3 last after all possible function calls. */ |
| register int __flags __asm__("r0") = tmp_flags; |
| register void *__stack __asm__("r1") = tmp_stack; |
| register void *__ptid __asm__("r2") = tmp_ptid; |
| register void *__tls __asm__("r3") = tmp_tls; |
| |
| /* %r0 = syscall(%r0 = flags, |
| * %r1 = child_stack, |
| * %r2 = parent_tidptr, |
| * %r3 = newtls, |
| * %r4 = child_tidptr) |
| */ |
| __SYS_REG(clone) |
| __asm__ __volatile__(/* %r0 = syscall(%r0 = flags, |
| * %r1 = child_stack, |
| * %r2 = parent_tidptr, |
| * %r3 = newtls, |
| * %r4 = child_tidptr) |
| */ |
| "push {r7}\n" |
| "mov r7,%1\n" |
| __syscall(clone)"\n" |
| |
| /* if (%r0 != 0) |
| * return %r0; |
| */ |
| "movs %0,r0\n" |
| "bne 1f\n" |
| |
| /* In the child, now. Call "fn(arg)". |
| */ |
| "ldr r0,[sp, #4]\n" |
| "mov lr,pc\n" |
| "ldr pc,[sp]\n" |
| |
| /* Call _exit(%r0), which never returns. We only |
| * need to set r7 for EABI syscall ABI but we do |
| * this always to simplify code sharing between |
| * old and new syscall ABIs. |
| */ |
| "mov r7,%2\n" |
| __syscall(exit)"\n" |
| |
| /* Pop r7 from the stack only in the parent. |
| */ |
| "1: pop {r7}\n" |
| : "=r" (__res) |
| : "r"(__sysreg), |
| "i"(__NR_exit), "r"(__stack), "r"(__flags), |
| "r"(__ptid), "r"(__tls), "r"(__ctid) |
| : "cc", "lr", "memory"); |
| } |
| clone_exit: |
| LSS_RETURN(int, __res); |
| } |
| #elif defined(__mips__) |
| #undef LSS_REG |
| #define LSS_REG(r,a) register unsigned long __r##r __asm__("$"#r) = \ |
| (unsigned long)(a) |
| |
| #if _MIPS_SIM == _MIPS_SIM_ABI32 |
| // See http://sources.redhat.com/ml/libc-alpha/2004-10/msg00050.html |
| // or http://www.linux-mips.org/archives/linux-mips/2004-10/msg00142.html |
| #define MIPS_SYSCALL_CLOBBERS "$1", "$3", "$8", "$9", "$10", "$11", "$12",\ |
| "$13", "$14", "$15", "$24", "$25", "memory" |
| #else |
| #define MIPS_SYSCALL_CLOBBERS "$1", "$3", "$10", "$11", "$12", "$13", \ |
| "$14", "$15", "$24", "$25", "memory" |
| #endif |
| |
| #undef LSS_BODY |
| #define LSS_BODY(type,name,r7,...) \ |
| register unsigned long __v0 __asm__("$2") = __NR_##name; \ |
| __asm__ __volatile__ ("syscall\n" \ |
| : "=&r"(__v0), r7 (__r7) \ |
| : "0"(__v0), ##__VA_ARGS__ \ |
| : MIPS_SYSCALL_CLOBBERS); \ |
| LSS_RETURN(type, __v0, __r7) |
| #undef _syscall0 |
| #define _syscall0(type, name) \ |
| type LSS_NAME(name)() { \ |
| register unsigned long __r7 __asm__("$7"); \ |
| LSS_BODY(type, name, "=r"); \ |
| } |
| #undef _syscall1 |
| #define _syscall1(type, name, type1, arg1) \ |
| type LSS_NAME(name)(type1 arg1) { \ |
| register unsigned long __r7 __asm__("$7"); \ |
| LSS_REG(4, arg1); LSS_BODY(type, name, "=r", "r"(__r4)); \ |
| } |
| #undef _syscall2 |
| #define _syscall2(type, name, type1, arg1, type2, arg2) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2) { \ |
| register unsigned long __r7 __asm__("$7"); \ |
| LSS_REG(4, arg1); LSS_REG(5, arg2); \ |
| LSS_BODY(type, name, "=r", "r"(__r4), "r"(__r5)); \ |
| } |
| #undef _syscall3 |
| #define _syscall3(type, name, type1, arg1, type2, arg2, type3, arg3) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3) { \ |
| register unsigned long __r7 __asm__("$7"); \ |
| LSS_REG(4, arg1); LSS_REG(5, arg2); LSS_REG(6, arg3); \ |
| LSS_BODY(type, name, "=r", "r"(__r4), "r"(__r5), "r"(__r6)); \ |
| } |
| #undef _syscall4 |
| #define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3, type4 arg4) { \ |
| LSS_REG(4, arg1); LSS_REG(5, arg2); LSS_REG(6, arg3); \ |
| LSS_REG(7, arg4); \ |
| LSS_BODY(type, name, "+r", "r"(__r4), "r"(__r5), "r"(__r6)); \ |
| } |
| #undef _syscall5 |
| #if _MIPS_SIM == _MIPS_SIM_ABI32 |
| /* The old 32bit MIPS system call API passes the fifth and sixth argument |
| * on the stack, whereas the new APIs use registers "r8" and "r9". |
| */ |
| #define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ |
| type5,arg5) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3, type4 arg4, \ |
| type5 arg5) { \ |
| LSS_REG(4, arg1); LSS_REG(5, arg2); LSS_REG(6, arg3); \ |
| LSS_REG(7, arg4); \ |
| register unsigned long __v0 __asm__("$2"); \ |
| __asm__ __volatile__ (".set noreorder\n" \ |
| "lw $2, %6\n" \ |
| "subu $29, 32\n" \ |
| "sw $2, 16($29)\n" \ |
| "li $2, %2\n" \ |
| "syscall\n" \ |
| "addiu $29, 32\n" \ |
| ".set reorder\n" \ |
| : "=&r"(__v0), "+r" (__r7) \ |
| : "i" (__NR_##name), "r"(__r4), "r"(__r5), \ |
| "r"(__r6), "m" ((unsigned long)arg5) \ |
| : MIPS_SYSCALL_CLOBBERS); \ |
| LSS_RETURN(type, __v0, __r7); \ |
| } |
| #else |
| #define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ |
| type5,arg5) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3, type4 arg4, \ |
| type5 arg5) { \ |
| LSS_REG(4, arg1); LSS_REG(5, arg2); LSS_REG(6, arg3); \ |
| LSS_REG(7, arg4); LSS_REG(8, arg5); \ |
| LSS_BODY(type, name, "+r", "r"(__r4), "r"(__r5), "r"(__r6), \ |
| "r"(__r8)); \ |
| } |
| #endif |
| #undef _syscall6 |
| #if _MIPS_SIM == _MIPS_SIM_ABI32 |
| /* The old 32bit MIPS system call API passes the fifth and sixth argument |
| * on the stack, whereas the new APIs use registers "r8" and "r9". |
| */ |
| #define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ |
| type5,arg5,type6,arg6) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3, type4 arg4, \ |
| type5 arg5, type6 arg6) { \ |
| LSS_REG(4, arg1); LSS_REG(5, arg2); LSS_REG(6, arg3); \ |
| LSS_REG(7, arg4); \ |
| register unsigned long __v0 __asm__("$2"); \ |
| __asm__ __volatile__ (".set noreorder\n" \ |
| "lw $2, %6\n" \ |
| "lw $8, %7\n" \ |
| "subu $29, 32\n" \ |
| "sw $2, 16($29)\n" \ |
| "sw $8, 20($29)\n" \ |
| "li $2, %2\n" \ |
| "syscall\n" \ |
| "addiu $29, 32\n" \ |
| ".set reorder\n" \ |
| : "=&r"(__v0), "+r" (__r7) \ |
| : "i" (__NR_##name), "r"(__r4), "r"(__r5), \ |
| "r"(__r6), "r" ((unsigned long)arg5), \ |
| "r" ((unsigned long)arg6) \ |
| : MIPS_SYSCALL_CLOBBERS); \ |
| LSS_RETURN(type, __v0, __r7); \ |
| } |
| #else |
| #define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ |
| type5,arg5,type6,arg6) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3, type4 arg4, \ |
| type5 arg5,type6 arg6) { \ |
| LSS_REG(4, arg1); LSS_REG(5, arg2); LSS_REG(6, arg3); \ |
| LSS_REG(7, arg4); LSS_REG(8, arg5); LSS_REG(9, arg6); \ |
| LSS_BODY(type, name, "+r", "r"(__r4), "r"(__r5), "r"(__r6), \ |
| "r"(__r8), "r"(__r9)); \ |
| } |
| #endif |
| LSS_INLINE int LSS_NAME(clone)(int (*fn)(void *), void *child_stack, |
| int flags, void *arg, int *parent_tidptr, |
| void *newtls, int *child_tidptr) { |
| register unsigned long __v0 __asm__("$2"); |
| register unsigned long __r7 __asm__("$7") = (unsigned long)newtls; |
| { |
| register int __flags __asm__("$4") = flags; |
| register void *__stack __asm__("$5") = child_stack; |
| register void *__ptid __asm__("$6") = parent_tidptr; |
| register int *__ctid __asm__("$8") = child_tidptr; |
| __asm__ __volatile__( |
| #if _MIPS_SIM == _MIPS_SIM_ABI32 && _MIPS_SZPTR == 32 |
| "subu $29,24\n" |
| #elif _MIPS_SIM == _MIPS_SIM_NABI32 |
| "sub $29,16\n" |
| #else |
| "dsubu $29,16\n" |
| #endif |
| |
| /* if (fn == NULL || child_stack == NULL) |
| * return -EINVAL; |
| */ |
| "li %0,%2\n" |
| "beqz %5,1f\n" |
| "beqz %6,1f\n" |
| |
| /* Push "arg" and "fn" onto the stack that will be |
| * used by the child. |
| */ |
| #if _MIPS_SIM == _MIPS_SIM_ABI32 && _MIPS_SZPTR == 32 |
| "subu %6,32\n" |
| "sw %5,0(%6)\n" |
| "sw %8,4(%6)\n" |
| #elif _MIPS_SIM == _MIPS_SIM_NABI32 |
| "sub %6,32\n" |
| "sw %5,0(%6)\n" |
| "sw %8,8(%6)\n" |
| #else |
| "dsubu %6,32\n" |
| "sd %5,0(%6)\n" |
| "sd %8,8(%6)\n" |
| #endif |
| |
| /* $7 = syscall($4 = flags, |
| * $5 = child_stack, |
| * $6 = parent_tidptr, |
| * $7 = newtls, |
| * $8 = child_tidptr) |
| */ |
| "li $2,%3\n" |
| "syscall\n" |
| |
| /* if ($7 != 0) |
| * return $2; |
| */ |
| "bnez $7,1f\n" |
| "bnez $2,1f\n" |
| |
| /* In the child, now. Call "fn(arg)". |
| */ |
| #if _MIPS_SIM == _MIPS_SIM_ABI32 && _MIPS_SZPTR == 32 |
| "lw $25,0($29)\n" |
| "lw $4,4($29)\n" |
| #elif _MIPS_SIM == _MIPS_SIM_NABI32 |
| "lw $25,0($29)\n" |
| "lw $4,8($29)\n" |
| #else |
| "ld $25,0($29)\n" |
| "ld $4,8($29)\n" |
| #endif |
| "jalr $25\n" |
| |
| /* Call _exit($2) |
| */ |
| "move $4,$2\n" |
| "li $2,%4\n" |
| "syscall\n" |
| |
| "1:\n" |
| #if _MIPS_SIM == _MIPS_SIM_ABI32 && _MIPS_SZPTR == 32 |
| "addu $29, 24\n" |
| #elif _MIPS_SIM == _MIPS_SIM_NABI32 |
| "add $29, 16\n" |
| #else |
| "daddu $29,16\n" |
| #endif |
| : "=&r" (__v0), "=r" (__r7) |
| : "i"(-EINVAL), "i"(__NR_clone), "i"(__NR_exit), |
| "r"(fn), "r"(__stack), "r"(__flags), "r"(arg), |
| "r"(__ptid), "r"(__r7), "r"(__ctid) |
| : "$9", "$10", "$11", "$12", "$13", "$14", "$15", |
| "$24", "memory"); |
| } |
| LSS_RETURN(int, __v0, __r7); |
| } |
| #elif defined (__PPC__) |
| #undef LSS_LOADARGS_0 |
| #define LSS_LOADARGS_0(name, dummy...) \ |
| __sc_0 = __NR_##name |
| #undef LSS_LOADARGS_1 |
| #define LSS_LOADARGS_1(name, arg1) \ |
| LSS_LOADARGS_0(name); \ |
| __sc_3 = (unsigned long) (arg1) |
| #undef LSS_LOADARGS_2 |
| #define LSS_LOADARGS_2(name, arg1, arg2) \ |
| LSS_LOADARGS_1(name, arg1); \ |
| __sc_4 = (unsigned long) (arg2) |
| #undef LSS_LOADARGS_3 |
| #define LSS_LOADARGS_3(name, arg1, arg2, arg3) \ |
| LSS_LOADARGS_2(name, arg1, arg2); \ |
| __sc_5 = (unsigned long) (arg3) |
| #undef LSS_LOADARGS_4 |
| #define LSS_LOADARGS_4(name, arg1, arg2, arg3, arg4) \ |
| LSS_LOADARGS_3(name, arg1, arg2, arg3); \ |
| __sc_6 = (unsigned long) (arg4) |
| #undef LSS_LOADARGS_5 |
| #define LSS_LOADARGS_5(name, arg1, arg2, arg3, arg4, arg5) \ |
| LSS_LOADARGS_4(name, arg1, arg2, arg3, arg4); \ |
| __sc_7 = (unsigned long) (arg5) |
| #undef LSS_LOADARGS_6 |
| #define LSS_LOADARGS_6(name, arg1, arg2, arg3, arg4, arg5, arg6) \ |
| LSS_LOADARGS_5(name, arg1, arg2, arg3, arg4, arg5); \ |
| __sc_8 = (unsigned long) (arg6) |
| #undef LSS_ASMINPUT_0 |
| #define LSS_ASMINPUT_0 "0" (__sc_0) |
| #undef LSS_ASMINPUT_1 |
| #define LSS_ASMINPUT_1 LSS_ASMINPUT_0, "1" (__sc_3) |
| #undef LSS_ASMINPUT_2 |
| #define LSS_ASMINPUT_2 LSS_ASMINPUT_1, "2" (__sc_4) |
| #undef LSS_ASMINPUT_3 |
| #define LSS_ASMINPUT_3 LSS_ASMINPUT_2, "3" (__sc_5) |
| #undef LSS_ASMINPUT_4 |
| #define LSS_ASMINPUT_4 LSS_ASMINPUT_3, "4" (__sc_6) |
| #undef LSS_ASMINPUT_5 |
| #define LSS_ASMINPUT_5 LSS_ASMINPUT_4, "5" (__sc_7) |
| #undef LSS_ASMINPUT_6 |
| #define LSS_ASMINPUT_6 LSS_ASMINPUT_5, "6" (__sc_8) |
| #undef LSS_BODY |
| #define LSS_BODY(nr, type, name, args...) \ |
| long __sc_ret, __sc_err; \ |
| { \ |
| register unsigned long __sc_0 __asm__ ("r0"); \ |
| register unsigned long __sc_3 __asm__ ("r3"); \ |
| register unsigned long __sc_4 __asm__ ("r4"); \ |
| register unsigned long __sc_5 __asm__ ("r5"); \ |
| register unsigned long __sc_6 __asm__ ("r6"); \ |
| register unsigned long __sc_7 __asm__ ("r7"); \ |
| register unsigned long __sc_8 __asm__ ("r8"); \ |
| \ |
| LSS_LOADARGS_##nr(name, args); \ |
| __asm__ __volatile__ \ |
| ("sc\n\t" \ |
| "mfcr %0" \ |
| : "=&r" (__sc_0), \ |
| "=&r" (__sc_3), "=&r" (__sc_4), \ |
| "=&r" (__sc_5), "=&r" (__sc_6), \ |
| "=&r" (__sc_7), "=&r" (__sc_8) \ |
| : LSS_ASMINPUT_##nr \ |
| : "cr0", "ctr", "memory", \ |
| "r9", "r10", "r11", "r12"); \ |
| __sc_ret = __sc_3; \ |
| __sc_err = __sc_0; \ |
| } \ |
| LSS_RETURN(type, __sc_ret, __sc_err) |
| #undef _syscall0 |
| #define _syscall0(type, name) \ |
| type LSS_NAME(name)(void) { \ |
| LSS_BODY(0, type, name); \ |
| } |
| #undef _syscall1 |
| #define _syscall1(type, name, type1, arg1) \ |
| type LSS_NAME(name)(type1 arg1) { \ |
| LSS_BODY(1, type, name, arg1); \ |
| } |
| #undef _syscall2 |
| #define _syscall2(type, name, type1, arg1, type2, arg2) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2) { \ |
| LSS_BODY(2, type, name, arg1, arg2); \ |
| } |
| #undef _syscall3 |
| #define _syscall3(type, name, type1, arg1, type2, arg2, type3, arg3) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3) { \ |
| LSS_BODY(3, type, name, arg1, arg2, arg3); \ |
| } |
| #undef _syscall4 |
| #define _syscall4(type, name, type1, arg1, type2, arg2, type3, arg3, \ |
| type4, arg4) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3, type4 arg4) { \ |
| LSS_BODY(4, type, name, arg1, arg2, arg3, arg4); \ |
| } |
| #undef _syscall5 |
| #define _syscall5(type, name, type1, arg1, type2, arg2, type3, arg3, \ |
| type4, arg4, type5, arg5) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3, type4 arg4, \ |
| type5 arg5) { \ |
| LSS_BODY(5, type, name, arg1, arg2, arg3, arg4, arg5); \ |
| } |
| #undef _syscall6 |
| #define _syscall6(type, name, type1, arg1, type2, arg2, type3, arg3, \ |
| type4, arg4, type5, arg5, type6, arg6) \ |
| type LSS_NAME(name)(type1 arg1, type2 arg2, type3 arg3, type4 arg4, \ |
| type5 arg5, type6 arg6) { \ |
| LSS_BODY(6, type, name, arg1, arg2, arg3, arg4, arg5, arg6); \ |
| } |
| /* clone function adapted from glibc 2.3.6 clone.S */ |
| /* TODO(csilvers): consider wrapping some args up in a struct, like we |
| * do for i386's _syscall6, so we can compile successfully on gcc 2.95 |
| */ |
| LSS_INLINE int LSS_NAME(clone)(int (*fn)(void *), void *child_stack, |
| int flags, void *arg, int *parent_tidptr, |
| void *newtls, int *child_tidptr) { |
| long __ret, __err; |
| { |
| register int (*__fn)(void *) __asm__ ("r8") = fn; |
| register void *__cstack __asm__ ("r4") = child_stack; |
| register int __flags __asm__ ("r3") = flags; |
| register void * __arg __asm__ ("r9") = arg; |
| register int * __ptidptr __asm__ ("r5") = parent_tidptr; |
| register void * __newtls __asm__ ("r6") = newtls; |
| register int * __ctidptr __asm__ ("r7") = child_tidptr; |
| __asm__ __volatile__( |
| /* check for fn == NULL |
| * and child_stack == NULL |
| */ |
| "cmpwi cr0, %6, 0\n\t" |
| "cmpwi cr1, %7, 0\n\t" |
| "cror cr0*4+eq, cr1*4+eq, cr0*4+eq\n\t" |
| "beq- cr0, 1f\n\t" |
| |
| /* set up stack frame for child */ |
| "clrrwi %7, %7, 4\n\t" |
| "li 0, 0\n\t" |
| "stwu 0, -16(%7)\n\t" |
| |
| /* fn, arg, child_stack are saved across the syscall: r28-30 */ |
| "mr 28, %6\n\t" |
| "mr 29, %7\n\t" |
| "mr 27, %9\n\t" |
| |
| /* syscall */ |
| "li 0, %4\n\t" |
| /* flags already in r3 |
| * child_stack already in r4 |
| * ptidptr already in r5 |
| * newtls already in r6 |
| * ctidptr already in r7 |
| */ |
| "sc\n\t" |
| |
| /* Test if syscall was successful */ |
| "cmpwi cr1, 3, 0\n\t" |
| "crandc cr1*4+eq, cr1*4+eq, cr0*4+so\n\t" |
| "bne- cr1, 1f\n\t" |
| |
| /* Do the function call */ |
| "mtctr 28\n\t" |
| "mr 3, 27\n\t" |
| "bctrl\n\t" |
| |
| /* Call _exit(r3) */ |
| "li 0, %5\n\t" |
| "sc\n\t" |
| |
| /* Return to parent */ |
| "1:\n" |
| "mfcr %1\n\t" |
| "mr %0, 3\n\t" |
| : "=r" (__ret), "=r" (__err) |
| : "0" (-1), "1" (EINVAL), |
| "i" (__NR_clone), "i" (__NR_exit), |
| "r" (__fn), "r" (__cstack), "r" (__flags), |
| "r" (__arg), "r" (__ptidptr), "r" (__newtls), |
| "r" (__ctidptr) |
| : "cr0", "cr1", "memory", "ctr", |
| "r0", "r29", "r27", "r28"); |
| } |
| LSS_RETURN(int, __ret, __err); |
| } |
| #endif |
| #define __NR__exit __NR_exit |
| #define __NR__gettid __NR_gettid |
| #define __NR__mremap __NR_mremap |
| LSS_INLINE _syscall1(int, close, int, f) |
| LSS_INLINE _syscall1(int, _exit, int, e) |
| LSS_INLINE _syscall3(int, fcntl, int, f, |
| int, c, long, a) |
| LSS_INLINE _syscall2(int, fstat, int, f, |
| struct kernel_stat*, b) |
| LSS_INLINE _syscall4(int, futex, int*, a, |
| int, o, int, v, |
| struct kernel_timespec*, t) |
| LSS_INLINE _syscall3(int, getdents, int, f, |
| struct kernel_dirent*, d, int, c) |
| #ifdef __NR_getdents64 |
| LSS_INLINE _syscall3(int, getdents64, int, f, |
| struct kernel_dirent64*, d, int, c) |
| #endif |
| LSS_INLINE _syscall0(pid_t, getpid) |
| LSS_INLINE _syscall0(pid_t, getppid) |
| LSS_INLINE _syscall0(pid_t, _gettid) |
| LSS_INLINE _syscall2(int, kill, pid_t, p, |
| int, s) |
| #if defined(__x86_64__) |
| /* Need to make sure off_t isn't truncated to 32-bits under x32. */ |
| LSS_INLINE off_t LSS_NAME(lseek)(int f, off_t o, int w) { |
| _LSS_BODY(3, off_t, lseek, off_t, LSS_SYSCALL_ARG(f), (uint64_t)(o), |
| LSS_SYSCALL_ARG(w)); |
| } |
| #else |
| LSS_INLINE _syscall3(off_t, lseek, int, f, |
| off_t, o, int, w) |
| #endif |
| LSS_INLINE _syscall2(int, munmap, void*, s, |
| size_t, l) |
| LSS_INLINE _syscall5(void*, _mremap, void*, o, |
| size_t, os, size_t, ns, |
| unsigned long, f, void *, a) |
| LSS_INLINE _syscall3(int, open, const char*, p, |
| int, f, int, m) |
| LSS_INLINE _syscall2(int, prctl, int, o, |
| long, a) |
| LSS_INLINE _syscall4(long, ptrace, int, r, |
| pid_t, p, void *, a, void *, d) |
| LSS_INLINE _syscall3(ssize_t, read, int, f, |
| void *, b, size_t, c) |
| LSS_INLINE _syscall4(int, rt_sigaction, int, s, |
| const struct kernel_sigaction*, a, |
| struct kernel_sigaction*, o, size_t, c) |
| LSS_INLINE _syscall4(int, rt_sigprocmask, int, h, |
| const struct kernel_sigset_t*, s, |
| struct kernel_sigset_t*, o, size_t, c); |
| LSS_INLINE _syscall0(int, sched_yield) |
| LSS_INLINE _syscall2(int, sigaltstack, const stack_t*, s, |
| const stack_t*, o) |
| LSS_INLINE _syscall2(int, stat, const char*, f, |
| struct kernel_stat*, b) |
| LSS_INLINE _syscall3(ssize_t, write, int, f, |
| const void *, b, size_t, c) |
| #if defined(__NR_getcpu) |
| LSS_INLINE _syscall3(long, getcpu, unsigned *, cpu, |
| unsigned *, node, void *, unused); |
| #endif |
| #if defined(__x86_64__) || \ |
| (defined(__mips__) && _MIPS_SIM != _MIPS_SIM_ABI32) |
| LSS_INLINE _syscall3(int, socket, int, d, |
| int, t, int, p) |
| #endif |
| #if defined(__x86_64__) |
| /* Need to make sure __off64_t isn't truncated to 32-bits under x32. */ |
| LSS_INLINE void* LSS_NAME(mmap)(void *s, size_t l, int p, int f, int d, |
| __off64_t o) { |
| LSS_BODY(6, void*, mmap, LSS_SYSCALL_ARG(s), LSS_SYSCALL_ARG(l), |
| LSS_SYSCALL_ARG(p), LSS_SYSCALL_ARG(f), |
| LSS_SYSCALL_ARG(d), (uint64_t)(o)); |
| } |
| |
| LSS_INLINE int LSS_NAME(sigaction)(int signum, |
| const struct kernel_sigaction *act, |
| struct kernel_sigaction *oldact) { |
| /* On x86_64, the kernel requires us to always set our own |
| * SA_RESTORER in order to be able to return from a signal handler. |
| * This function must have a "magic" signature that the "gdb" |
| * (and maybe the kernel?) can recognize. |
| */ |
| if (act != NULL && !(act->sa_flags & SA_RESTORER)) { |
| struct kernel_sigaction a = *act; |
| a.sa_flags |= SA_RESTORER; |
| a.sa_restorer = LSS_NAME(restore_rt)(); |
| return LSS_NAME(rt_sigaction)(signum, &a, oldact, |
| (KERNEL_NSIG+7)/8); |
| } else { |
| return LSS_NAME(rt_sigaction)(signum, act, oldact, |
| (KERNEL_NSIG+7)/8); |
| } |
| } |
| |
| LSS_INLINE int LSS_NAME(sigprocmask)(int how, |
| const struct kernel_sigset_t *set, |
| struct kernel_sigset_t *oldset) { |
| return LSS_NAME(rt_sigprocmask)(how, set, oldset, (KERNEL_NSIG+7)/8); |
| } |
| #endif |
| #if defined(__x86_64__) || \ |
| defined(__arm__) || \ |
| (defined(__mips__) && _MIPS_SIM != _MIPS_SIM_ABI32) |
| LSS_INLINE _syscall4(pid_t, wait4, pid_t, p, |
| int*, s, int, o, |
| struct kernel_rusage*, r) |
| LSS_INLINE pid_t LSS_NAME(waitpid)(pid_t pid, int *status, int options){ |
| return LSS_NAME(wait4)(pid, status, options, 0); |
| } |
| #endif |
| #if (defined(__i386__) || defined(__x86_64__) || defined(__arm__)) && \ |
| !defined(__ANDROID__) |
| LSS_INLINE _syscall4(int, openat, int, d, const char *, p, int, f, int, m) |
| #endif |
| LSS_INLINE int LSS_NAME(sigemptyset)(struct kernel_sigset_t *set) { |
| memset(&set->sig, 0, sizeof(set->sig)); |
| return 0; |
| } |
| |
| LSS_INLINE int LSS_NAME(sigfillset)(struct kernel_sigset_t *set) { |
| memset(&set->sig, -1, sizeof(set->sig)); |
| return 0; |
| } |
| |
| LSS_INLINE int LSS_NAME(sigaddset)(struct kernel_sigset_t *set, |
| int signum) { |
| if (signum < 1 || signum > (int)(8*sizeof(set->sig))) { |
| LSS_ERRNO = EINVAL; |
| return -1; |
| } else { |
| set->sig[(signum - 1)/(8*sizeof(set->sig[0]))] |
| |= 1UL << ((signum - 1) % (8*sizeof(set->sig[0]))); |
| return 0; |
| } |
| } |
| |
| LSS_INLINE int LSS_NAME(sigdelset)(struct kernel_sigset_t *set, |
| int signum) { |
| if (signum < 1 || signum > (int)(8*sizeof(set->sig))) { |
| LSS_ERRNO = EINVAL; |
| return -1; |
| } else { |
| set->sig[(signum - 1)/(8*sizeof(set->sig[0]))] |
| &= ~(1UL << ((signum - 1) % (8*sizeof(set->sig[0])))); |
| return 0; |
| } |
| } |
| |
| #if defined(__i386__) || \ |
| defined(__arm__) || \ |
| (defined(__mips__) && _MIPS_SIM == _MIPS_SIM_ABI32) || defined(__PPC__) |
| #define __NR__sigaction __NR_sigaction |
| #define __NR__sigprocmask __NR_sigprocmask |
| LSS_INLINE _syscall2(int, fstat64, int, f, |
| struct kernel_stat64 *, b) |
| LSS_INLINE _syscall5(int, _llseek, uint, fd, ulong, hi, ulong, lo, |
| loff_t *, res, uint, wh) |
| #ifdef __PPC64__ |
| LSS_INLINE _syscall6(void*, mmap, void*, s, |
| size_t, l, int, p, |
| int, f, int, d, |
| off_t, o) |
| #else |
| #ifndef __ARM_EABI__ |
| /* Not available on ARM EABI Linux. */ |
| LSS_INLINE _syscall1(void*, mmap, void*, a) |
| #endif |
| LSS_INLINE _syscall6(void*, mmap2, void*, s, |
| size_t, l, int, p, |
| int, f, int, d, |
| off_t, o) |
| #endif |
| LSS_INLINE _syscall3(int, _sigaction, int, s, |
| const struct kernel_old_sigaction*, a, |
| struct kernel_old_sigaction*, o) |
| LSS_INLINE _syscall3(int, _sigprocmask, int, h, |
| const unsigned long*, s, |
| unsigned long*, o) |
| LSS_INLINE _syscall2(int, stat64, const char *, p, |
| struct kernel_stat64 *, b) |
| |
| LSS_INLINE int LSS_NAME(sigaction)(int signum, |
| const struct kernel_sigaction *act, |
| struct kernel_sigaction *oldact) { |
| int old_errno = LSS_ERRNO; |
| int rc; |
| struct kernel_sigaction a; |
| if (act != NULL) { |
| a = *act; |
| #ifdef __i386__ |
| /* On i386, the kernel requires us to always set our own |
| * SA_RESTORER when using realtime signals. Otherwise, it does not |
| * know how to return from a signal handler. This function must have |
| * a "magic" signature that the "gdb" (and maybe the kernel?) can |
| * recognize. |
| * Apparently, a SA_RESTORER is implicitly set by the kernel, when |
| * using non-realtime signals. |
| * |
| * TODO: Test whether ARM needs a restorer |
| */ |
| if (!(a.sa_flags & SA_RESTORER)) { |
| a.sa_flags |= SA_RESTORER; |
| a.sa_restorer = (a.sa_flags & SA_SIGINFO) |
| ? LSS_NAME(restore_rt)() : LSS_NAME(restore)(); |
| } |
| #endif |
| } |
| rc = LSS_NAME(rt_sigaction)(signum, act ? &a : act, oldact, |
| (KERNEL_NSIG+7)/8); |
| if (rc < 0 && LSS_ERRNO == ENOSYS) { |
| struct kernel_old_sigaction oa, ooa, *ptr_a = &oa, *ptr_oa = &ooa; |
| if (!act) { |
| ptr_a = NULL; |
| } else { |
| oa.sa_handler_ = act->sa_handler_; |
| memcpy(&oa.sa_mask, &act->sa_mask, sizeof(oa.sa_mask)); |
| #ifndef __mips__ |
| oa.sa_restorer = act->sa_restorer; |
| #endif |
| oa.sa_flags = act->sa_flags; |
| } |
| if (!oldact) { |
| ptr_oa = NULL; |
| } |
| LSS_ERRNO = old_errno; |
| rc = LSS_NAME(_sigaction)(signum, ptr_a, ptr_oa); |
| if (rc == 0 && oldact) { |
| if (act) { |
| memcpy(oldact, act, sizeof(*act)); |
| } else { |
| memset(oldact, 0, sizeof(*oldact)); |
| } |
| oldact->sa_handler_ = ptr_oa->sa_handler_; |
| oldact->sa_flags = ptr_oa->sa_flags; |
| memcpy(&oldact->sa_mask, &ptr_oa->sa_mask, sizeof(ptr_oa->sa_mask)); |
| #ifndef __mips__ |
| oldact->sa_restorer = ptr_oa->sa_restorer; |
| #endif |
| } |
| } |
| return rc; |
| } |
| |
| LSS_INLINE int LSS_NAME(sigprocmask)(int how, |
| const struct kernel_sigset_t *set, |
| struct kernel_sigset_t *oldset) { |
| int olderrno = LSS_ERRNO; |
| int rc = LSS_NAME(rt_sigprocmask)(how, set, oldset, (KERNEL_NSIG+7)/8); |
| if (rc < 0 && LSS_ERRNO == ENOSYS) { |
| LSS_ERRNO = olderrno; |
| if (oldset) { |
| LSS_NAME(sigemptyset)(oldset); |
| } |
| rc = LSS_NAME(_sigprocmask)(how, |
| set ? &set->sig[0] : NULL, |
| oldset ? &oldset->sig[0] : NULL); |
| } |
| return rc; |
| } |
| #endif |
| #if defined(__PPC__) |
| #undef LSS_SC_LOADARGS_0 |
| #define LSS_SC_LOADARGS_0(dummy...) |
| #undef LSS_SC_LOADARGS_1 |
| #define LSS_SC_LOADARGS_1(arg1) \ |
| __sc_4 = (unsigned long) (arg1) |
| #undef LSS_SC_LOADARGS_2 |
| #define LSS_SC_LOADARGS_2(arg1, arg2) \ |
| LSS_SC_LOADARGS_1(arg1); \ |
| __sc_5 = (unsigned long) (arg2) |
| #undef LSS_SC_LOADARGS_3 |
| #define LSS_SC_LOADARGS_3(arg1, arg2, arg3) \ |
| LSS_SC_LOADARGS_2(arg1, arg2); \ |
| __sc_6 = (unsigned long) (arg3) |
| #undef LSS_SC_LOADARGS_4 |
| #define LSS_SC_LOADARGS_4(arg1, arg2, arg3, arg4) \ |
| LSS_SC_LOADARGS_3(arg1, arg2, arg3); \ |
| __sc_7 = (unsigned long) (arg4) |
| #undef LSS_SC_LOADARGS_5 |
| #define LSS_SC_LOADARGS_5(arg1, arg2, arg3, arg4, arg5) \ |
| LSS_SC_LOADARGS_4(arg1, arg2, arg3, arg4); \ |
| __sc_8 = (unsigned long) (arg5) |
| #undef LSS_SC_BODY |
| #define LSS_SC_BODY(nr, type, opt, args...) \ |
| long __sc_ret, __sc_err; \ |
| { \ |
| register unsigned long __sc_0 __asm__ ("r0") = __NR_socketcall; \ |
| register unsigned long __sc_3 __asm__ ("r3") = opt; \ |
| register unsigned long __sc_4 __asm__ ("r4"); \ |
| register unsigned long __sc_5 __asm__ ("r5"); \ |
| register unsigned long __sc_6 __asm__ ("r6"); \ |
| register unsigned long __sc_7 __asm__ ("r7"); \ |
| register unsigned long __sc_8 __asm__ ("r8"); \ |
| LSS_SC_LOADARGS_##nr(args); \ |
| __asm__ __volatile__ \ |
| ("stwu 1, -48(1)\n\t" \ |
| "stw 4, 20(1)\n\t" \ |
| "stw 5, 24(1)\n\t" \ |
| "stw 6, 28(1)\n\t" \ |
| "stw 7, 32(1)\n\t" \ |
| "stw 8, 36(1)\n\t" \ |
| "addi 4, 1, 20\n\t" \ |
| "sc\n\t" \ |
| "mfcr %0" \ |
| : "=&r" (__sc_0), \ |
| "=&r" (__sc_3), "=&r" (__sc_4), \ |
| "=&r" (__sc_5), "=&r" (__sc_6), \ |
| "=&r" (__sc_7), "=&r" (__sc_8) \ |
| : LSS_ASMINPUT_##nr \ |
| : "cr0", "ctr", "memory"); \ |
| __sc_ret = __sc_3; \ |
| __sc_err = __sc_0; \ |
| } \ |
| LSS_RETURN(type, __sc_ret, __sc_err) |
| |
| LSS_INLINE int LSS_NAME(socket)(int domain, int type, int protocol) { |
| LSS_SC_BODY(3, int, 1, domain, type, protocol); |
| } |
| #endif |
| #if defined(__i386__) || \ |
| (defined(__arm__) && !defined(__ARM_EABI__)) || \ |
| (defined(__mips__) && _MIPS_SIM == _MIPS_SIM_ABI32) |
| |
| /* See sys_socketcall in net/socket.c in kernel source. |
| * It de-multiplexes on its first arg and unpacks the arglist |
| * array in its second arg. |
| */ |
| LSS_INLINE _syscall2(long, socketcall, int, c, unsigned long*, a) |
| |
| LSS_INLINE int LSS_NAME(socket)(int domain, int type, int protocol) { |
| unsigned long args[3] = { |
| (unsigned long) domain, |
| (unsigned long) type, |
| (unsigned long) protocol |
| }; |
| return LSS_NAME(socketcall)(1, args); |
| } |
| #elif defined(__ARM_EABI__) |
| LSS_INLINE _syscall3(int, socket, int, d, |
| int, t, int, p) |
| #endif |
| #if defined(__i386__) || defined(__PPC__) || \ |
| (defined(__mips__) && _MIPS_SIM == _MIPS_SIM_ABI32) |
| LSS_INLINE _syscall3(pid_t, waitpid, pid_t, p, |
| int*, s, int, o) |
| #endif |
| #if defined(__mips__) |
| /* sys_pipe() on MIPS has non-standard calling conventions, as it returns |
| * both file handles through CPU registers. |
| */ |
| LSS_INLINE int LSS_NAME(pipe)(int *p) { |
| register unsigned long __v0 __asm__("$2") = __NR_pipe; |
| register unsigned long __v1 __asm__("$3"); |
| register unsigned long __r7 __asm__("$7"); |
| __asm__ __volatile__ ("syscall\n" |
| : "=&r"(__v0), "=&r"(__v1), "+r" (__r7) |
| : "0"(__v0) |
| : "$8", "$9", "$10", "$11", "$12", |
| "$13", "$14", "$15", "$24", "memory"); |
| if (__r7) { |
| LSS_ERRNO = __v0; |
| return -1; |
| } else { |
| p[0] = __v0; |
| p[1] = __v1; |
| return 0; |
| } |
| } |
| #else |
| LSS_INLINE _syscall1(int, pipe, int *, p) |
| #endif |
| |
| LSS_INLINE pid_t LSS_NAME(gettid)() { |
| pid_t tid = LSS_NAME(_gettid)(); |
| if (tid != -1) { |
| return tid; |
| } |
| return LSS_NAME(getpid)(); |
| } |
| |
| LSS_INLINE void *LSS_NAME(mremap)(void *old_address, size_t old_size, |
| size_t new_size, int flags, ...) { |
| va_list ap; |
| void *new_address, *rc; |
| va_start(ap, flags); |
| new_address = va_arg(ap, void *); |
| rc = LSS_NAME(_mremap)(old_address, old_size, new_size, |
| flags, new_address); |
| va_end(ap); |
| return rc; |
| } |
| |
| LSS_INLINE int LSS_NAME(ptrace_detach)(pid_t pid) { |
| /* PTRACE_DETACH can sometimes forget to wake up the tracee and it |
| * then sends job control signals to the real parent, rather than to |
| * the tracer. We reduce the risk of this happening by starting a |
| * whole new time slice, and then quickly sending a SIGCONT signal |
| * right after detaching from the tracee. |
| */ |
| int rc, err; |
| LSS_NAME(sched_yield)(); |
| rc = LSS_NAME(ptrace)(PTRACE_DETACH, pid, (void *)0, (void *)0); |
| err = LSS_ERRNO; |
| LSS_NAME(kill)(pid, SIGCONT); |
| LSS_ERRNO = err; |
| return rc; |
| } |
| #endif |
| |
| #if defined(__cplusplus) && !defined(SYS_CPLUSPLUS) |
| } |
| #endif |
| |
| #endif |
| #endif |
