| /* Copyright 2020 The Chromium OS Authors. All rights reserved. |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| #include "battery_smart.h" |
| #include "charge_manager.h" |
| #include "charger.h" |
| #include "chipset.h" |
| #include "common.h" |
| #include "console.h" |
| #include "driver/charger/sm5803.h" |
| #include "driver/tcpm/tcpci.h" |
| #include "usb_pd.h" |
| |
| #define CPRINTF(format, args...) cprintf(CC_USBPD, format, ## args) |
| #define CPRINTS(format, args...) cprints(CC_USBPD, format, ## args) |
| |
| int pd_check_vconn_swap(int port) |
| { |
| /* Allow VCONN swaps if the AP is on */ |
| return chipset_in_state(CHIPSET_STATE_ANY_SUSPEND | CHIPSET_STATE_ON); |
| } |
| |
| void pd_power_supply_reset(int port) |
| { |
| if (port != 0) |
| return; |
| |
| /* Disable VBUS */ |
| tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SRC_CTRL_LOW); |
| |
| #ifdef CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT |
| /* Give back the current quota we are no longer using */ |
| charge_manager_source_port(port, 0); |
| #endif /* defined(CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT) */ |
| |
| /* Notify host of power info change. */ |
| pd_send_host_event(PD_EVENT_POWER_CHANGE); |
| } |
| |
| int pd_set_power_supply_ready(int port) |
| { |
| int rv; |
| |
| if (port != 0) |
| return EC_ERROR_INVAL; |
| |
| /* Disable charging. */ |
| rv = tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SNK_CTRL_LOW); |
| if (rv) |
| return rv; |
| |
| /* Our policy is not to source VBUS when the AP is off. */ |
| if (chipset_in_state(CHIPSET_STATE_ANY_OFF)) |
| return EC_ERROR_NOT_POWERED; |
| |
| /* Provide Vbus. */ |
| rv = tcpc_write(port, TCPC_REG_COMMAND, TCPC_REG_COMMAND_SRC_CTRL_HIGH); |
| if (rv) |
| return rv; |
| |
| #ifdef CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT |
| /* Ensure we advertise the proper available current quota */ |
| charge_manager_source_port(port, 1); |
| #endif /* defined(CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT) */ |
| |
| /* Notify host of power info change. */ |
| pd_send_host_event(PD_EVENT_POWER_CHANGE); |
| |
| return EC_SUCCESS; |
| } |
| |
| int pd_snk_is_vbus_provided(int port) |
| { |
| int regval = 0; |
| |
| tcpc_read(port, TCPC_REG_POWER_STATUS, ®val); |
| return regval & TCPC_REG_POWER_STATUS_VBUS_PRES; |
| } |