| /* Copyright 2017 The ChromiumOS Authors |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| /* GPIO module for Chrome EC */ |
| |
| #include "clock.h" |
| #include "common.h" |
| #include "gpio.h" |
| #include "gpio_chip.h" |
| #include "hooks.h" |
| #include "registers.h" |
| #include "task.h" |
| #include "util.h" |
| |
| void gpio_enable_clocks(void) |
| { |
| /* Enable all GPIOs clocks */ |
| STM32_RCC_AHB4ENR |= STM32_RCC_AHB4ENR_GPIOMASK; |
| |
| /* Delay 1 AHB clock cycle after the clock is enabled */ |
| clock_wait_bus_cycles(BUS_AHB, 1); |
| } |
| |
| static void gpio_init(void) |
| { |
| /* Enable IRQs now that pins are set up */ |
| task_enable_irq(STM32_IRQ_EXTI0); |
| task_enable_irq(STM32_IRQ_EXTI1); |
| task_enable_irq(STM32_IRQ_EXTI2); |
| task_enable_irq(STM32_IRQ_EXTI3); |
| task_enable_irq(STM32_IRQ_EXTI4); |
| task_enable_irq(STM32_IRQ_EXTI9_5); |
| task_enable_irq(STM32_IRQ_EXTI15_10); |
| } |
| DECLARE_HOOK(HOOK_INIT, gpio_init, HOOK_PRIO_DEFAULT); |
| |
| static void _gpio_interrupt(void) |
| { |
| gpio_interrupt(); |
| } |
| |
| DECLARE_IRQ(STM32_IRQ_EXTI0, _gpio_interrupt, 1); |
| DECLARE_IRQ(STM32_IRQ_EXTI1, _gpio_interrupt, 1); |
| DECLARE_IRQ(STM32_IRQ_EXTI2, _gpio_interrupt, 1); |
| DECLARE_IRQ(STM32_IRQ_EXTI3, _gpio_interrupt, 1); |
| DECLARE_IRQ(STM32_IRQ_EXTI4, _gpio_interrupt, 1); |
| DECLARE_IRQ(STM32_IRQ_EXTI9_5, _gpio_interrupt, 1); |
| DECLARE_IRQ(STM32_IRQ_EXTI15_10, _gpio_interrupt, 1); |
| |
| #include "gpio-f0-l.c" |