| /* Copyright 2019 The Chromium OS Authors. All rights reserved. |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| /* Intel TGL-U-RVP-ITE board-specific configuration */ |
| |
| #ifndef __CROS_EC_BOARD_H |
| #define __CROS_EC_BOARD_H |
| |
| /* ITE EC variant */ |
| #define VARIANT_INTELRVP_EC_IT8320 |
| |
| /* MECC config */ |
| #define CONFIG_INTEL_RVP_MECC_VERSION_0_9 |
| |
| /* USB MUX */ |
| #define CONFIG_USB_MUX_VIRTUAL |
| |
| #define CONFIG_USBC_VCONN |
| |
| /* FAN configs */ |
| #define CONFIG_FANS 1 |
| #define BOARD_FAN_MIN_RPM 3000 |
| #define BOARD_FAN_MAX_RPM 10000 |
| |
| /* Temperature sensor */ |
| #define CONFIG_TEMP_SENSOR |
| |
| /* Support early firmware selection */ |
| #define CONFIG_VBOOT_EFS2 |
| #define GPIO_PACKET_MODE_EN GPIO_ME_G3_TO_ME_EC |
| |
| #include "baseboard.h" |
| |
| #define CONFIG_CHIPSET_TIGERLAKE |
| #define GPIO_PG_EC_RSMRST_ODL GPIO_RSMRST_L_PGOOD |
| #define GPIO_PCH_DSW_PWROK GPIO_EC_PCH_DSW_PWROK |
| #define GPIO_PG_EC_ALL_SYS_PWRGD GPIO_ALL_SYS_PWRGD |
| #define CONFIG_BATTERY_PRESENT_GPIO GPIO_EC_BATT_PRES_L |
| #define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE_L |
| #define GPIO_BAT_LED_RED_L GPIO_BAT_LED_GREEN_L |
| #define GPIO_PWR_LED_WHITE_L GPIO_AC_LED_GREEN_L |
| |
| /* Charger */ |
| #define CONFIG_CHARGER_ISL9241 |
| |
| /* DC Jack charge ports */ |
| #undef CONFIG_DEDICATED_CHARGE_PORT_COUNT |
| #define CONFIG_DEDICATED_CHARGE_PORT_COUNT 1 |
| |
| /* USB ports */ |
| #define CONFIG_USB_PD_PORT_MAX_COUNT 2 |
| #define DEDICATED_CHARGE_PORT 2 |
| |
| /* USB PD config */ |
| #define CONFIG_USB_PD_TCPM_ITE_ON_CHIP |
| #define CONFIG_USB_PD_ITE_ACTIVE_PORT_COUNT 2 |
| |
| /* Config BB retimer */ |
| #define CONFIG_USBC_RETIMER_INTEL_BB |
| |
| /* Thermal configs */ |
| |
| /* I2C ports */ |
| #define CONFIG_IT83XX_SMCLK2_ON_GPC7 |
| |
| #define I2C_PORT_CHARGER IT83XX_I2C_CH_B |
| #define I2C_PORT_BATTERY IT83XX_I2C_CH_B |
| #define I2C_PORT_PCA9555_BOARD_ID_GPIO IT83XX_I2C_CH_B |
| #define I2C_PORT_PORT80 IT83XX_I2C_CH_B |
| #define I2C_PORT0_BB_RETIMER IT83XX_I2C_CH_E |
| #define I2C_PORT1_BB_RETIMER IT83XX_I2C_CH_E |
| |
| #define I2C_ADDR_PCA9555_BOARD_ID_GPIO 0x22 |
| #define PORT80_I2C_ADDR MAX695X_I2C_ADDR1_FLAGS |
| #if defined(BOARD_TGLRVPU_ITE) || defined(BOARD_TGLRVPU_ITE_TCPMV1) |
| #define I2C_PORT0_BB_RETIMER_ADDR 0x42 |
| #define I2C_PORT1_BB_RETIMER_ADDR 0x43 |
| #else /* BOARD_TGLRVPY_ITE */ |
| #define I2C_PORT0_BB_RETIMER_ADDR 0x42 |
| #define I2C_PORT1_BB_RETIMER_ADDR 0x41 |
| #endif /* BOARD_TGLRVPU_ITE */ |
| |
| /* Enabling SOP* communication */ |
| #define CONFIG_USB_PD_DECODE_SOP |
| |
| /* Enabling Thunderbolt-compatible mode */ |
| #define CONFIG_USB_PD_TBT_COMPAT_MODE |
| |
| /* Enabling USB4 mode */ |
| #define CONFIG_USB_PD_USB4 |
| /* |
| * For USB4, set the total budget for source current to 4.5A so that the first |
| * connected port is allowed to source 3A while sourcing 1.5A on other type-C |
| * ports. |
| */ |
| #define CONFIG_USB_PD_MAX_TOTAL_SOURCE_CURRENT 4500 |
| |
| #ifndef __ASSEMBLER__ |
| |
| enum tglrvp_charge_ports { |
| TYPE_C_PORT_0, |
| TYPE_C_PORT_1, |
| }; |
| |
| enum tglrvp_i2c_channel { |
| I2C_CHAN_FLASH, |
| I2C_CHAN_BATT_CHG, |
| I2C_CHAN_RETIMER, |
| I2C_CHAN_COUNT, |
| }; |
| |
| enum battery_type { |
| BATTERY_SIMPLO_SMP_HHP_408, |
| BATTERY_SIMPLO_SMP_CA_445, |
| BATTERY_TYPE_COUNT, |
| }; |
| |
| /* Define max power */ |
| #define PD_MAX_POWER_MW 60000 |
| |
| int board_get_version(void); |
| |
| #endif /* !__ASSEMBLER__ */ |
| |
| #endif /* __CROS_EC_BOARD_H */ |