Google Git
Sign in
chromium / chromiumos / platform / ec / master / . / chip / it83xx / gpio.c
blob: f15adb431ad4226abb0045aa515adec94c3bf0eb [file] [log] [blame]
/* Copyright 2013 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* GPIO module for Chrome EC */
#include "clock.h"
#include "common.h"
#include "gpio.h"
#include "hooks.h"
#include "intc.h"
#include "it83xx_pd.h"
#include "kmsc_chip.h"
#include "registers.h"
#include "switch.h"
#include "system.h"
#include "task.h"
#include "timer.h"
#include "util.h"
/* Data structure to define KSI/KSO GPIO mode control registers. */
struct kbs_gpio_ctrl_t {
/* GPIO mode control register. */
volatile uint8_t *gpio_mode;
/* GPIO output enable register. */
volatile uint8_t *gpio_out;
};
static const struct kbs_gpio_ctrl_t kbs_gpio_ctrl_regs[] = {
/* KSI pins 7:0 */
{&IT83XX_KBS_KSIGCTRL, &IT83XX_KBS_KSIGOEN},
/* KSO pins 15:8 */
{&IT83XX_KBS_KSOHGCTRL, &IT83XX_KBS_KSOHGOEN},
/* KSO pins 7:0 */
{&IT83XX_KBS_KSOLGCTRL, &IT83XX_KBS_KSOLGOEN},
};
/**
* Convert wake-up controller (WUC) group to the corresponding wake-up edge
* sense register (WUESR). Return pointer to the register.
*
* @param grp WUC group.
*
* @return Pointer to corresponding WUESR register.
*/
static volatile uint8_t *wuesr(uint8_t grp)
{
/*
* From WUESR1-WUESR4, the address increases by ones. From WUESR5 on
* the address increases by fours.
*/
return (grp <= 4) ?
(volatile uint8_t *)(IT83XX_WUC_WUESR1 + grp-1) :
(volatile uint8_t *)(IT83XX_WUC_WUESR5 + 4*(grp-5));
}
/**
* Convert wake-up controller (WUC) group to the corresponding wake-up edge
* mode register (WUEMR). Return pointer to the register.
*
* @param grp WUC group.
*
* @return Pointer to corresponding WUEMR register.
*/
static volatile uint8_t *wuemr(uint8_t grp)
{
/*
* From WUEMR1-WUEMR4, the address increases by ones. From WUEMR5 on
* the address increases by fours.
*/
return (grp <= 4) ?
(volatile uint8_t *)(IT83XX_WUC_WUEMR1 + grp-1) :
(volatile uint8_t *)(IT83XX_WUC_WUEMR5 + 4*(grp-5));
}
/**
* Convert wake-up controller (WUC) group to the corresponding wake-up both edge
* mode register (WUBEMR). Return pointer to the register.
*
* @param grp WUC group.
*
* @return Pointer to corresponding WUBEMR register.
*/
#ifdef IT83XX_GPIO_INT_FLEXIBLE
static volatile uint8_t *wubemr(uint8_t grp)
{
/*
* From WUBEMR1-WUBEMR4, the address increases by ones. From WUBEMR5 on
* the address increases by fours.
*/
return (grp <= 4) ?
(volatile uint8_t *)(IT83XX_WUC_WUBEMR1 + grp-1) :
(volatile uint8_t *)(IT83XX_WUC_WUBEMR5 + 4*(grp-5));
}
#endif
/*
* Array to store the corresponding GPIO port and mask, and WUC group and mask
* for each WKO interrupt. This allows GPIO interrupts coming in through WKO
* to easily identify which pin caused the interrupt.
* Note: Using designated initializers here in addition to using the array size
* assert because many rows are purposely skipped. Not all IRQs are WKO IRQs,
* so the IRQ index skips around. But, we still want the entire array to take
* up the size of the total number of IRQs because the index to the array could
* be any IRQ number.
*/
static const struct {
uint8_t gpio_port;
uint8_t gpio_mask;
uint8_t wuc_group;
uint8_t wuc_mask;
} gpio_irqs[] = {
/* irq gpio_port,gpio_mask,wuc_group,wuc_mask */
[IT83XX_IRQ_WKO20] = {GPIO_D, BIT(0), 2, BIT(0)},
[IT83XX_IRQ_WKO21] = {GPIO_D, BIT(1), 2, BIT(1)},
[IT83XX_IRQ_WKO22] = {GPIO_C, BIT(4), 2, BIT(2)},
[IT83XX_IRQ_WKO23] = {GPIO_C, BIT(6), 2, BIT(3)},
[IT83XX_IRQ_WKO24] = {GPIO_D, BIT(2), 2, BIT(4)},
#ifdef IT83XX_GPIO_INT_FLEXIBLE
[IT83XX_IRQ_WKO40] = {GPIO_E, BIT(5), 4, BIT(0)},
[IT83XX_IRQ_WKO45] = {GPIO_E, BIT(6), 4, BIT(5)},
[IT83XX_IRQ_WKO46] = {GPIO_E, BIT(7), 4, BIT(6)},
#endif
[IT83XX_IRQ_WKO50] = {GPIO_K, BIT(0), 5, BIT(0)},
[IT83XX_IRQ_WKO51] = {GPIO_K, BIT(1), 5, BIT(1)},
[IT83XX_IRQ_WKO52] = {GPIO_K, BIT(2), 5, BIT(2)},
[IT83XX_IRQ_WKO53] = {GPIO_K, BIT(3), 5, BIT(3)},
[IT83XX_IRQ_WKO54] = {GPIO_K, BIT(4), 5, BIT(4)},
[IT83XX_IRQ_WKO55] = {GPIO_K, BIT(5), 5, BIT(5)},
[IT83XX_IRQ_WKO56] = {GPIO_K, BIT(6), 5, BIT(6)},
[IT83XX_IRQ_WKO57] = {GPIO_K, BIT(7), 5, BIT(7)},
[IT83XX_IRQ_WKO60] = {GPIO_H, BIT(0), 6, BIT(0)},
[IT83XX_IRQ_WKO61] = {GPIO_H, BIT(1), 6, BIT(1)},
[IT83XX_IRQ_WKO62] = {GPIO_H, BIT(2), 6, BIT(2)},
[IT83XX_IRQ_WKO63] = {GPIO_H, BIT(3), 6, BIT(3)},
[IT83XX_IRQ_WKO64] = {GPIO_F, BIT(4), 6, BIT(4)},
[IT83XX_IRQ_WKO65] = {GPIO_F, BIT(5), 6, BIT(5)},
[IT83XX_IRQ_WKO65] = {GPIO_F, BIT(6), 6, BIT(6)},
[IT83XX_IRQ_WKO67] = {GPIO_F, BIT(7), 6, BIT(7)},
[IT83XX_IRQ_WKO70] = {GPIO_E, BIT(0), 7, BIT(0)},
[IT83XX_IRQ_WKO71] = {GPIO_E, BIT(1), 7, BIT(1)},
[IT83XX_IRQ_WKO72] = {GPIO_E, BIT(2), 7, BIT(2)},
[IT83XX_IRQ_WKO73] = {GPIO_E, BIT(3), 7, BIT(3)},
[IT83XX_IRQ_WKO74] = {GPIO_I, BIT(4), 7, BIT(4)},
[IT83XX_IRQ_WKO75] = {GPIO_I, BIT(5), 7, BIT(5)},
[IT83XX_IRQ_WKO76] = {GPIO_I, BIT(6), 7, BIT(6)},
[IT83XX_IRQ_WKO77] = {GPIO_I, BIT(7), 7, BIT(7)},
[IT83XX_IRQ_WKO80] = {GPIO_A, BIT(3), 8, BIT(0)},
[IT83XX_IRQ_WKO81] = {GPIO_A, BIT(4), 8, BIT(1)},
[IT83XX_IRQ_WKO82] = {GPIO_A, BIT(5), 8, BIT(2)},
[IT83XX_IRQ_WKO83] = {GPIO_A, BIT(6), 8, BIT(3)},
[IT83XX_IRQ_WKO84] = {GPIO_B, BIT(2), 8, BIT(4)},
[IT83XX_IRQ_WKO85] = {GPIO_C, BIT(0), 8, BIT(5)},
[IT83XX_IRQ_WKO86] = {GPIO_C, BIT(7), 8, BIT(6)},
[IT83XX_IRQ_WKO87] = {GPIO_D, BIT(7), 8, BIT(7)},
[IT83XX_IRQ_WKO88] = {GPIO_H, BIT(4), 9, BIT(0)},
[IT83XX_IRQ_WKO89] = {GPIO_H, BIT(5), 9, BIT(1)},
[IT83XX_IRQ_WKO90] = {GPIO_H, BIT(6), 9, BIT(2)},
[IT83XX_IRQ_WKO91] = {GPIO_A, BIT(0), 9, BIT(3)},
[IT83XX_IRQ_WKO92] = {GPIO_A, BIT(1), 9, BIT(4)},
[IT83XX_IRQ_WKO93] = {GPIO_A, BIT(2), 9, BIT(5)},
[IT83XX_IRQ_WKO94] = {GPIO_B, BIT(4), 9, BIT(6)},
[IT83XX_IRQ_WKO95] = {GPIO_C, BIT(2), 9, BIT(7)},
[IT83XX_IRQ_WKO96] = {GPIO_F, BIT(0), 10, BIT(0)},
[IT83XX_IRQ_WKO97] = {GPIO_F, BIT(1), 10, BIT(1)},
[IT83XX_IRQ_WKO98] = {GPIO_F, BIT(2), 10, BIT(2)},
[IT83XX_IRQ_WKO99] = {GPIO_F, BIT(3), 10, BIT(3)},
[IT83XX_IRQ_WKO100] = {GPIO_A, BIT(7), 10, BIT(4)},
[IT83XX_IRQ_WKO101] = {GPIO_B, BIT(0), 10, BIT(5)},
[IT83XX_IRQ_WKO102] = {GPIO_B, BIT(1), 10, BIT(6)},
[IT83XX_IRQ_WKO103] = {GPIO_B, BIT(3), 10, BIT(7)},
[IT83XX_IRQ_WKO104] = {GPIO_B, BIT(5), 11, BIT(0)},
[IT83XX_IRQ_WKO105] = {GPIO_B, BIT(6), 11, BIT(1)},
[IT83XX_IRQ_WKO106] = {GPIO_B, BIT(7), 11, BIT(2)},
[IT83XX_IRQ_WKO107] = {GPIO_C, BIT(1), 11, BIT(3)},
[IT83XX_IRQ_WKO108] = {GPIO_C, BIT(3), 11, BIT(4)},
[IT83XX_IRQ_WKO109] = {GPIO_C, BIT(5), 11, BIT(5)},
[IT83XX_IRQ_WKO110] = {GPIO_D, BIT(3), 11, BIT(6)},
[IT83XX_IRQ_WKO111] = {GPIO_D, BIT(4), 11, BIT(7)},
[IT83XX_IRQ_WKO112] = {GPIO_D, BIT(5), 12, BIT(0)},
[IT83XX_IRQ_WKO113] = {GPIO_D, BIT(6), 12, BIT(1)},
[IT83XX_IRQ_WKO114] = {GPIO_E, BIT(4), 12, BIT(2)},
[IT83XX_IRQ_WKO115] = {GPIO_G, BIT(0), 12, BIT(3)},
[IT83XX_IRQ_WKO116] = {GPIO_G, BIT(1), 12, BIT(4)},
[IT83XX_IRQ_WKO117] = {GPIO_G, BIT(2), 12, BIT(5)},
[IT83XX_IRQ_WKO118] = {GPIO_G, BIT(6), 12, BIT(6)},
[IT83XX_IRQ_WKO119] = {GPIO_I, BIT(0), 12, BIT(7)},
[IT83XX_IRQ_WKO120] = {GPIO_I, BIT(1), 13, BIT(0)},
[IT83XX_IRQ_WKO121] = {GPIO_I, BIT(2), 13, BIT(1)},
[IT83XX_IRQ_WKO122] = {GPIO_I, BIT(3), 13, BIT(2)},
#ifdef IT83XX_GPIO_INT_FLEXIBLE
[IT83XX_IRQ_WKO123] = {GPIO_G, BIT(3), 13, BIT(3)},
[IT83XX_IRQ_WKO124] = {GPIO_G, BIT(4), 13, BIT(4)},
[IT83XX_IRQ_WKO125] = {GPIO_G, BIT(5), 13, BIT(5)},
[IT83XX_IRQ_WKO126] = {GPIO_G, BIT(7), 13, BIT(6)},
#endif
[IT83XX_IRQ_WKO128] = {GPIO_J, BIT(0), 14, BIT(0)},
[IT83XX_IRQ_WKO129] = {GPIO_J, BIT(1), 14, BIT(1)},
[IT83XX_IRQ_WKO130] = {GPIO_J, BIT(2), 14, BIT(2)},
[IT83XX_IRQ_WKO131] = {GPIO_J, BIT(3), 14, BIT(3)},
[IT83XX_IRQ_WKO132] = {GPIO_J, BIT(4), 14, BIT(4)},
[IT83XX_IRQ_WKO133] = {GPIO_J, BIT(5), 14, BIT(5)},
[IT83XX_IRQ_WKO134] = {GPIO_J, BIT(6), 14, BIT(6)},
[IT83XX_IRQ_WKO135] = {GPIO_J, BIT(7), 14, BIT(7)},
[IT83XX_IRQ_WKO136] = {GPIO_L, BIT(0), 15, BIT(0)},
[IT83XX_IRQ_WKO137] = {GPIO_L, BIT(1), 15, BIT(1)},
[IT83XX_IRQ_WKO138] = {GPIO_L, BIT(2), 15, BIT(2)},
[IT83XX_IRQ_WKO139] = {GPIO_L, BIT(3), 15, BIT(3)},
[IT83XX_IRQ_WKO140] = {GPIO_L, BIT(4), 15, BIT(4)},
[IT83XX_IRQ_WKO141] = {GPIO_L, BIT(5), 15, BIT(5)},
[IT83XX_IRQ_WKO142] = {GPIO_L, BIT(6), 15, BIT(6)},
[IT83XX_IRQ_WKO143] = {GPIO_L, BIT(7), 15, BIT(7)},
#ifdef IT83XX_GPIO_INT_FLEXIBLE
[IT83XX_IRQ_WKO144] = {GPIO_M, BIT(0), 16, BIT(0)},
[IT83XX_IRQ_WKO145] = {GPIO_M, BIT(1), 16, BIT(1)},
[IT83XX_IRQ_WKO146] = {GPIO_M, BIT(2), 16, BIT(2)},
[IT83XX_IRQ_WKO147] = {GPIO_M, BIT(3), 16, BIT(3)},
[IT83XX_IRQ_WKO148] = {GPIO_M, BIT(4), 16, BIT(4)},
[IT83XX_IRQ_WKO149] = {GPIO_M, BIT(5), 16, BIT(5)},
[IT83XX_IRQ_WKO150] = {GPIO_M, BIT(6), 16, BIT(6)},
#endif
#if defined(CHIP_FAMILY_IT8XXX1) || defined(CHIP_FAMILY_IT8XXX2)
[IT83XX_IRQ_GPO0] = {GPIO_O, BIT(0), 19, BIT(0)},
[IT83XX_IRQ_GPO1] = {GPIO_O, BIT(1), 19, BIT(1)},
[IT83XX_IRQ_GPO2] = {GPIO_O, BIT(2), 19, BIT(2)},
[IT83XX_IRQ_GPO3] = {GPIO_O, BIT(3), 19, BIT(3)},
[IT83XX_IRQ_GPP0] = {GPIO_P, BIT(0), 20, BIT(0)},
[IT83XX_IRQ_GPP1] = {GPIO_P, BIT(1), 20, BIT(1)},
[IT83XX_IRQ_GPP2] = {GPIO_P, BIT(2), 20, BIT(2)},
[IT83XX_IRQ_GPP3] = {GPIO_P, BIT(3), 20, BIT(3)},
[IT83XX_IRQ_GPP4] = {GPIO_P, BIT(4), 20, BIT(4)},
[IT83XX_IRQ_GPP5] = {GPIO_P, BIT(5), 20, BIT(5)},
[IT83XX_IRQ_GPP6] = {GPIO_P, BIT(6), 20, BIT(6)},
[IT83XX_IRQ_GPQ0] = {GPIO_Q, BIT(0), 21, BIT(0)},
[IT83XX_IRQ_GPQ1] = {GPIO_Q, BIT(1), 21, BIT(1)},
[IT83XX_IRQ_GPQ2] = {GPIO_Q, BIT(2), 21, BIT(2)},
[IT83XX_IRQ_GPQ3] = {GPIO_Q, BIT(3), 21, BIT(3)},
[IT83XX_IRQ_GPQ4] = {GPIO_Q, BIT(4), 21, BIT(4)},
[IT83XX_IRQ_GPQ5] = {GPIO_Q, BIT(5), 21, BIT(5)},
[IT83XX_IRQ_GPR0] = {GPIO_R, BIT(0), 22, BIT(0)},
[IT83XX_IRQ_GPR1] = {GPIO_R, BIT(1), 22, BIT(1)},
[IT83XX_IRQ_GPR2] = {GPIO_R, BIT(2), 22, BIT(2)},
[IT83XX_IRQ_GPR3] = {GPIO_R, BIT(3), 22, BIT(3)},
[IT83XX_IRQ_GPR4] = {GPIO_R, BIT(4), 22, BIT(4)},
[IT83XX_IRQ_GPR5] = {GPIO_R, BIT(5), 22, BIT(5)},
#endif
[IT83XX_IRQ_COUNT] = { 0, 0, 0, 0},
};
BUILD_ASSERT(ARRAY_SIZE(gpio_irqs) == IT83XX_IRQ_COUNT + 1);
/**
* Given a GPIO port and mask, find the corresponding WKO interrupt number.
*
* @param port GPIO port
* @param mask GPIO mask
*
* @return IRQ for the WKO interrupt on the corresponding input pin.
*/
static int gpio_to_irq(uint8_t port, uint8_t mask)
{
int i;
for (i = 0; i < IT83XX_IRQ_COUNT; i++) {
if (gpio_irqs[i].gpio_port == port &&
gpio_irqs[i].gpio_mask == mask)
return i;
}
return -1;
}
struct gpio_1p8v_t {
volatile uint8_t *reg;
uint8_t sel;
};
static const struct gpio_1p8v_t gpio_1p8v_sel[GPIO_PORT_COUNT][8] = {
#ifdef IT83XX_GPIO_1P8V_PIN_EXTENDED
[GPIO_A] = { [4] = {&IT83XX_GPIO_GRC24, BIT(0)},
[5] = {&IT83XX_GPIO_GRC24, BIT(1)},
[6] = {&IT83XX_GPIO_GRC24, BIT(5)},
[7] = {&IT83XX_GPIO_GRC24, BIT(6)} },
[GPIO_B] = { [3] = {&IT83XX_GPIO_GRC22, BIT(1)},
[4] = {&IT83XX_GPIO_GRC22, BIT(0)},
[5] = {&IT83XX_GPIO_GRC19, BIT(7)},
[6] = {&IT83XX_GPIO_GRC19, BIT(6)},
[7] = {&IT83XX_GPIO_GRC24, BIT(4)} },
[GPIO_C] = { [0] = {&IT83XX_GPIO_GRC22, BIT(7)},
[1] = {&IT83XX_GPIO_GRC19, BIT(5)},
[2] = {&IT83XX_GPIO_GRC19, BIT(4)},
[4] = {&IT83XX_GPIO_GRC24, BIT(2)},
[6] = {&IT83XX_GPIO_GRC24, BIT(3)},
[7] = {&IT83XX_GPIO_GRC19, BIT(3)} },
[GPIO_D] = { [0] = {&IT83XX_GPIO_GRC19, BIT(2)},
[1] = {&IT83XX_GPIO_GRC19, BIT(1)},
[2] = {&IT83XX_GPIO_GRC19, BIT(0)},
[3] = {&IT83XX_GPIO_GRC20, BIT(7)},
[4] = {&IT83XX_GPIO_GRC20, BIT(6)},
[5] = {&IT83XX_GPIO_GRC22, BIT(4)},
[6] = {&IT83XX_GPIO_GRC22, BIT(5)},
[7] = {&IT83XX_GPIO_GRC22, BIT(6)} },
[GPIO_E] = { [0] = {&IT83XX_GPIO_GRC20, BIT(5)},
[1] = {&IT83XX_GPIO_GCR28, BIT(6)},
[2] = {&IT83XX_GPIO_GCR28, BIT(7)},
[4] = {&IT83XX_GPIO_GRC22, BIT(2)},
[5] = {&IT83XX_GPIO_GRC22, BIT(3)},
[6] = {&IT83XX_GPIO_GRC20, BIT(4)},
[7] = {&IT83XX_GPIO_GRC20, BIT(3)} },
[GPIO_F] = { [0] = {&IT83XX_GPIO_GCR28, BIT(4)},
[1] = {&IT83XX_GPIO_GCR28, BIT(5)},
[2] = {&IT83XX_GPIO_GRC20, BIT(2)},
[3] = {&IT83XX_GPIO_GRC20, BIT(1)},
[4] = {&IT83XX_GPIO_GRC20, BIT(0)},
[5] = {&IT83XX_GPIO_GRC21, BIT(7)},
[6] = {&IT83XX_GPIO_GRC21, BIT(6)},
[7] = {&IT83XX_GPIO_GRC21, BIT(5)} },
[GPIO_G] = { [0] = {&IT83XX_GPIO_GCR28, BIT(2)},
[1] = {&IT83XX_GPIO_GRC21, BIT(4)},
[2] = {&IT83XX_GPIO_GCR28, BIT(3)},
[6] = {&IT83XX_GPIO_GRC21, BIT(3)} },
[GPIO_H] = { [0] = {&IT83XX_GPIO_GRC21, BIT(2)},
[1] = {&IT83XX_GPIO_GRC21, BIT(1)},
[2] = {&IT83XX_GPIO_GRC21, BIT(0)},
[5] = {&IT83XX_GPIO_GCR27, BIT(7)},
[6] = {&IT83XX_GPIO_GCR28, BIT(0)} },
[GPIO_I] = { [0] = {&IT83XX_GPIO_GCR27, BIT(3)},
[1] = {&IT83XX_GPIO_GRC23, BIT(4)},
[2] = {&IT83XX_GPIO_GRC23, BIT(5)},
[3] = {&IT83XX_GPIO_GRC23, BIT(6)},
[4] = {&IT83XX_GPIO_GRC23, BIT(7)},
[5] = {&IT83XX_GPIO_GCR27, BIT(4)},
[6] = {&IT83XX_GPIO_GCR27, BIT(5)},
[7] = {&IT83XX_GPIO_GCR27, BIT(6)} },
[GPIO_J] = { [0] = {&IT83XX_GPIO_GRC23, BIT(0)},
[1] = {&IT83XX_GPIO_GRC23, BIT(1)},
[2] = {&IT83XX_GPIO_GRC23, BIT(2)},
[3] = {&IT83XX_GPIO_GRC23, BIT(3)},
[4] = {&IT83XX_GPIO_GCR27, BIT(0)},
[5] = {&IT83XX_GPIO_GCR27, BIT(1)},
[6] = {&IT83XX_GPIO_GCR27, BIT(2)},
[7] = {&IT83XX_GPIO_GCR33, BIT(2)} },
[GPIO_K] = { [0] = {&IT83XX_GPIO_GCR26, BIT(0)},
[1] = {&IT83XX_GPIO_GCR26, BIT(1)},
[2] = {&IT83XX_GPIO_GCR26, BIT(2)},
[3] = {&IT83XX_GPIO_GCR26, BIT(3)},
[4] = {&IT83XX_GPIO_GCR26, BIT(4)},
[5] = {&IT83XX_GPIO_GCR26, BIT(5)},
[6] = {&IT83XX_GPIO_GCR26, BIT(6)},
[7] = {&IT83XX_GPIO_GCR26, BIT(7)} },
[GPIO_L] = { [0] = {&IT83XX_GPIO_GCR25, BIT(0)},
[1] = {&IT83XX_GPIO_GCR25, BIT(1)},
[2] = {&IT83XX_GPIO_GCR25, BIT(2)},
[3] = {&IT83XX_GPIO_GCR25, BIT(3)},
[4] = {&IT83XX_GPIO_GCR25, BIT(4)},
[5] = {&IT83XX_GPIO_GCR25, BIT(5)},
[6] = {&IT83XX_GPIO_GCR25, BIT(6)},
[7] = {&IT83XX_GPIO_GCR25, BIT(7)} },
#if defined(CHIP_FAMILY_IT8XXX1) || defined(CHIP_FAMILY_IT8XXX2)
[GPIO_O] = { [0] = {&IT83XX_GPIO_GCR31, BIT(0)},
[1] = {&IT83XX_GPIO_GCR31, BIT(1)},
[2] = {&IT83XX_GPIO_GCR31, BIT(2)},
[3] = {&IT83XX_GPIO_GCR31, BIT(3)} },
[GPIO_P] = { [0] = {&IT83XX_GPIO_GCR32, BIT(0)},
[1] = {&IT83XX_GPIO_GCR32, BIT(1)},
[2] = {&IT83XX_GPIO_GCR32, BIT(2)},
[3] = {&IT83XX_GPIO_GCR32, BIT(3)},
[4] = {&IT83XX_GPIO_GCR32, BIT(4)},
[5] = {&IT83XX_GPIO_GCR32, BIT(5)},
[6] = {&IT83XX_GPIO_GCR32, BIT(6)} },
#endif
#else
[GPIO_A] = { [4] = {&IT83XX_GPIO_GRC24, BIT(0)},
[5] = {&IT83XX_GPIO_GRC24, BIT(1)} },
[GPIO_B] = { [3] = {&IT83XX_GPIO_GRC22, BIT(1)},
[4] = {&IT83XX_GPIO_GRC22, BIT(0)},
[5] = {&IT83XX_GPIO_GRC19, BIT(7)},
[6] = {&IT83XX_GPIO_GRC19, BIT(6)} },
[GPIO_C] = { [1] = {&IT83XX_GPIO_GRC19, BIT(5)},
[2] = {&IT83XX_GPIO_GRC19, BIT(4)},
[7] = {&IT83XX_GPIO_GRC19, BIT(3)} },
[GPIO_D] = { [0] = {&IT83XX_GPIO_GRC19, BIT(2)},
[1] = {&IT83XX_GPIO_GRC19, BIT(1)},
[2] = {&IT83XX_GPIO_GRC19, BIT(0)},
[3] = {&IT83XX_GPIO_GRC20, BIT(7)},
[4] = {&IT83XX_GPIO_GRC20, BIT(6)} },
[GPIO_E] = { [0] = {&IT83XX_GPIO_GRC20, BIT(5)},
[6] = {&IT83XX_GPIO_GRC20, BIT(4)},
[7] = {&IT83XX_GPIO_GRC20, BIT(3)} },
[GPIO_F] = { [2] = {&IT83XX_GPIO_GRC20, BIT(2)},
[3] = {&IT83XX_GPIO_GRC20, BIT(1)},
[4] = {&IT83XX_GPIO_GRC20, BIT(0)},
[5] = {&IT83XX_GPIO_GRC21, BIT(7)},
[6] = {&IT83XX_GPIO_GRC21, BIT(6)},
[7] = {&IT83XX_GPIO_GRC21, BIT(5)} },
[GPIO_H] = { [0] = {&IT83XX_GPIO_GRC21, BIT(2)},
[1] = {&IT83XX_GPIO_GRC21, BIT(1)},
[2] = {&IT83XX_GPIO_GRC21, BIT(0)} },
[GPIO_I] = { [1] = {&IT83XX_GPIO_GRC23, BIT(4)},
[2] = {&IT83XX_GPIO_GRC23, BIT(5)},
[3] = {&IT83XX_GPIO_GRC23, BIT(6)},
[4] = {&IT83XX_GPIO_GRC23, BIT(7)} },
[GPIO_J] = { [0] = {&IT83XX_GPIO_GRC23, BIT(0)},
[1] = {&IT83XX_GPIO_GRC23, BIT(1)},
[2] = {&IT83XX_GPIO_GRC23, BIT(2)},
[3] = {&IT83XX_GPIO_GRC23, BIT(3)} },
#endif
};
static void gpio_1p8v_3p3v_sel_by_pin(uint8_t port, uint8_t pin, int sel_1p8v)
{
volatile uint8_t *reg_1p8v = gpio_1p8v_sel[port][pin].reg;
uint8_t sel = gpio_1p8v_sel[port][pin].sel;
if (reg_1p8v == NULL)
return;
if (sel_1p8v)
*reg_1p8v |= sel;
else
*reg_1p8v &= ~sel;
}
static inline void it83xx_set_alt_func(uint32_t port, uint32_t pin,
enum gpio_alternate_func func)
{
/*
* If func is not ALT_FUNC_NONE, set for alternate function.
* Otherwise, turn the pin into an input as it's default.
*/
if (func != GPIO_ALT_FUNC_NONE)
IT83XX_GPIO_CTRL(port, pin) &= ~(GPCR_PORT_PIN_MODE_OUTPUT |
GPCR_PORT_PIN_MODE_INPUT);
else
IT83XX_GPIO_CTRL(port, pin) =
(IT83XX_GPIO_CTRL(port, pin) | GPCR_PORT_PIN_MODE_INPUT)
& ~GPCR_PORT_PIN_MODE_OUTPUT;
}
void gpio_set_alternate_function(uint32_t port, uint32_t mask,
enum gpio_alternate_func func)
{
uint32_t pin = 0;
/* Alternate function configuration for KSI/KSO pins */
if (port > GPIO_PORT_COUNT) {
port -= GPIO_KSI;
/*
* If func is non-negative, set for keyboard scan function.
* Otherwise, turn the pin into a GPIO input.
*/
if (func >= GPIO_ALT_FUNC_DEFAULT) {
/* KBS mode */
*kbs_gpio_ctrl_regs[port].gpio_mode &= ~mask;
} else {
/* input */
*kbs_gpio_ctrl_regs[port].gpio_out &= ~mask;
/* GPIO mode */
*kbs_gpio_ctrl_regs[port].gpio_mode |= mask;
}
return;
}
/* For each bit high in the mask, set that pin to use alt. func. */
while (mask > 0) {
if (mask & 1)
it83xx_set_alt_func(port, pin, func);
pin++;
mask >>= 1;
}
}
test_mockable int gpio_get_level(enum gpio_signal signal)
{
return (IT83XX_GPIO_DATA_MIRROR(gpio_list[signal].port) &
gpio_list[signal].mask) ? 1 : 0;
}
void gpio_set_level(enum gpio_signal signal, int value)
{
/* critical section with interrupts off */
uint32_t int_mask = read_clear_int_mask();
if (value)
IT83XX_GPIO_DATA(gpio_list[signal].port) |=
gpio_list[signal].mask;
else
IT83XX_GPIO_DATA(gpio_list[signal].port) &=
~gpio_list[signal].mask;
/* restore interrupts */
set_int_mask(int_mask);
}
void gpio_kbs_pin_gpio_mode(uint32_t port, uint32_t mask, uint32_t flags)
{
uint32_t idx = port - GPIO_KSI;
/* Set GPIO mode */
*kbs_gpio_ctrl_regs[idx].gpio_mode |= mask;
/* Set input or output */
if (flags & GPIO_OUTPUT) {
/*
* Select open drain first, so that we don't glitch the signal
* when changing the line to an output.
*/
if (flags & GPIO_OPEN_DRAIN)
/*
* it83xx: need external pullup for output data high
* it8xxx2: this pin is always internal pullup
*/
IT83XX_GPIO_GPOT(port) |= mask;
else
/*
* it8xxx2: this pin is not internal pullup
*/
IT83XX_GPIO_GPOT(port) &= ~mask;
/* Set level before change to output. */
if (flags & GPIO_HIGH)
IT83XX_GPIO_DATA(port) |= mask;
else if (flags & GPIO_LOW)
IT83XX_GPIO_DATA(port) &= ~mask;
*kbs_gpio_ctrl_regs[idx].gpio_out |= mask;
} else {
*kbs_gpio_ctrl_regs[idx].gpio_out &= ~mask;
if (flags & GPIO_PULL_UP)
IT83XX_GPIO_GPOT(port) |= mask;
else
/* No internal pullup and pulldown */
IT83XX_GPIO_GPOT(port) &= ~mask;
}
}
#ifndef IT83XX_GPIO_INT_FLEXIBLE
/* Returns true when the falling trigger bit actually mean both trigger. */
static int group_falling_is_both(const int group)
{
return group == 7 || group == 10 || group == 12;
}
static const char *get_gpio_string(const int port, const int mask)
{
static char buffer[3];
int i;
buffer[0] = port - GPIO_A + 'A';
buffer[1] = '!';
for (i = 0; i < 8; ++i) {
if (mask & BIT(i)) {
buffer[1] = i + '0';
break;
}
}
return buffer;
}
#endif /* IT83XX_GPIO_INT_FLEXIBLE */
void gpio_set_flags_by_mask(uint32_t port, uint32_t mask, uint32_t flags)
{
uint32_t pin = 0;
uint32_t mask_copy = mask;
/* Set GPIO mode for KSI/KSO pins */
if (port > GPIO_PORT_COUNT) {
gpio_kbs_pin_gpio_mode(port, mask, flags);
return;
}
/*
* Select open drain first, so that we don't glitch the signal
* when changing the line to an output.
*/
if (flags & GPIO_OPEN_DRAIN)
IT83XX_GPIO_GPOT(port) |= mask;
else
IT83XX_GPIO_GPOT(port) &= ~mask;
/* If output, set level before changing type to an output. */
if (flags & GPIO_OUTPUT) {
if (flags & GPIO_HIGH)
IT83XX_GPIO_DATA(port) |= mask;
else if (flags & GPIO_LOW)
IT83XX_GPIO_DATA(port) &= ~mask;
}
/* For each bit high in the mask, set input/output and pullup/down. */
while (mask_copy > 0) {
if (mask_copy & 1) {
/* Set input or output. */
if (flags & GPIO_OUTPUT)
IT83XX_GPIO_CTRL(port, pin) =
(IT83XX_GPIO_CTRL(port, pin) |
GPCR_PORT_PIN_MODE_OUTPUT) &
~GPCR_PORT_PIN_MODE_INPUT;
else
IT83XX_GPIO_CTRL(port, pin) =
(IT83XX_GPIO_CTRL(port, pin) |
GPCR_PORT_PIN_MODE_INPUT) &
~GPCR_PORT_PIN_MODE_OUTPUT;
/* Handle pullup / pulldown */
if (flags & GPIO_PULL_UP) {
IT83XX_GPIO_CTRL(port, pin) =
(IT83XX_GPIO_CTRL(port, pin) |
GPCR_PORT_PIN_MODE_PULLUP) &
~GPCR_PORT_PIN_MODE_PULLDOWN;
} else if (flags & GPIO_PULL_DOWN) {
IT83XX_GPIO_CTRL(port, pin) =
(IT83XX_GPIO_CTRL(port, pin) |
GPCR_PORT_PIN_MODE_PULLDOWN) &
~GPCR_PORT_PIN_MODE_PULLUP;
} else {
/* No pull up/down */
IT83XX_GPIO_CTRL(port, pin) &=
~(GPCR_PORT_PIN_MODE_PULLUP |
GPCR_PORT_PIN_MODE_PULLDOWN);
}
/* To select 1.8v or 3.3v support. */
gpio_1p8v_3p3v_sel_by_pin(port, pin,
(flags & GPIO_SEL_1P8V));
}
pin++;
mask_copy >>= 1;
}
if (flags & (GPIO_INT_F_RISING | GPIO_INT_F_FALLING)) {
int irq, wuc_group, wuc_mask;
irq = gpio_to_irq(port, mask);
wuc_group = gpio_irqs[irq].wuc_group;
wuc_mask = gpio_irqs[irq].wuc_mask;
/*
* Set both edges interrupt.
* The WUBEMR register is valid on IT8320 DX version.
* And the setting (falling or rising edge) of WUEMR register is
* invalid if this mode is set.
*/
#ifdef IT83XX_GPIO_INT_FLEXIBLE
if ((flags & GPIO_INT_BOTH) == GPIO_INT_BOTH)
*(wubemr(wuc_group)) |= wuc_mask;
else
*(wubemr(wuc_group)) &= ~wuc_mask;
#endif
if (flags & GPIO_INT_F_FALLING) {
#ifndef IT83XX_GPIO_INT_FLEXIBLE
if (!!(flags & GPIO_INT_F_RISING) !=
group_falling_is_both(wuc_group)) {
ccprintf("!!Fix GPIO %s interrupt config!!\n",
get_gpio_string(port, mask));
}
#endif
*(wuemr(wuc_group)) |= wuc_mask;
} else {
*(wuemr(wuc_group)) &= ~wuc_mask;
}
/*
* Always write 1 to clear the WUC status register after
* modifying edge mode selection register (WUBEMR and WUEMR).
*/
*(wuesr(wuc_group)) = wuc_mask;
}
}
int gpio_enable_interrupt(enum gpio_signal signal)
{
int irq = gpio_to_irq(gpio_list[signal].port, gpio_list[signal].mask);
if (irq == -1)
return EC_ERROR_UNKNOWN;
else
task_enable_irq(irq);
return EC_SUCCESS;
}
int gpio_disable_interrupt(enum gpio_signal signal)
{
int irq = gpio_to_irq(gpio_list[signal].port, gpio_list[signal].mask);
if (irq == -1)
return EC_ERROR_UNKNOWN;
else
task_disable_irq(irq);
return EC_SUCCESS;
}
int gpio_clear_pending_interrupt(enum gpio_signal signal)
{
int irq = gpio_to_irq(gpio_list[signal].port, gpio_list[signal].mask);
if (irq == -1)
return EC_ERROR_UNKNOWN;
*(wuesr(gpio_irqs[irq].wuc_group)) = gpio_irqs[irq].wuc_mask;
task_clear_pending_irq(irq);
return EC_SUCCESS;
}
/* To prevent cc pins leakage, disables integrated cc module. */
void it83xx_disable_cc_module(int port)
{
/* Power down all CC, and disable CC voltage detector */
IT83XX_USBPD_CCGCR(port) |= USBPD_REG_MASK_DISABLE_CC;
#if defined(CONFIG_USB_PD_TCPM_DRIVER_IT83XX)
IT83XX_USBPD_CCCSR(port) |= USBPD_REG_MASK_DISABLE_CC_VOL_DETECTOR;
#elif defined(CONFIG_USB_PD_TCPM_DRIVER_IT8XXX2)
IT83XX_USBPD_CCGCR(port) |= USBPD_REG_MASK_DISABLE_CC_VOL_DETECTOR;
#endif
/*
* Disconnect CC analog module (ex.UP/RD/DET/TX/RX), and
* disconnect CC 5.1K to GND
*/
IT83XX_USBPD_CCCSR(port) |= (USBPD_REG_MASK_CC2_DISCONNECT |
USBPD_REG_MASK_CC2_DISCONNECT_5_1K_TO_GND |
USBPD_REG_MASK_CC1_DISCONNECT |
USBPD_REG_MASK_CC1_DISCONNECT_5_1K_TO_GND);
/* Disconnect CC 5V tolerant */
IT83XX_USBPD_CCPSR(port) |= (USBPD_REG_MASK_DISCONNECT_POWER_CC2 |
USBPD_REG_MASK_DISCONNECT_POWER_CC1);
}
void gpio_pre_init(void)
{
const struct gpio_info *g = gpio_list;
int is_warm = system_is_reboot_warm();
int flags;
int i;
IT83XX_GPIO_GCR = 0x06;
#if !defined(CONFIG_IT83XX_VCC_1P8V) && !defined(CONFIG_IT83XX_VCC_3P3V)
#error Please select voltage level of VCC for EC.
#endif
#if defined(CONFIG_IT83XX_VCC_1P8V) && defined(CONFIG_IT83XX_VCC_3P3V)
#error Must select only one voltage level of VCC for EC.
#endif
/* The power level of GPM6 follows VCC */
IT83XX_GPIO_GCR29 |= BIT(0);
/* The power level (VCC) of GPM0~6 is 1.8V */
if (IS_ENABLED(CONFIG_IT83XX_VCC_1P8V))
IT83XX_GPIO_GCR30 |= BIT(4);
/* The power level (VCC) of GPM0~6 is 3.3V */
if (IS_ENABLED(CONFIG_IT83XX_VCC_3P3V))
IT83XX_GPIO_GCR30 &= ~BIT(4);
#if IT83XX_USBPD_PHY_PORT_COUNT < CONFIG_USB_PD_ITE_ACTIVE_PORT_COUNT
#error "ITE pd active port count should be less than physical port count !"
#endif
/*
* To prevent cc pins leakage and cc pins can be used as gpio,
* disable board not active ITE TCPC port cc modules.
*/
for (i = CONFIG_USB_PD_ITE_ACTIVE_PORT_COUNT;
i < IT83XX_USBPD_PHY_PORT_COUNT; i++) {
it83xx_disable_cc_module(i);
/* Dis-connect 5.1K dead battery resistor to CC */
IT83XX_USBPD_CCPSR(i) |=
(USBPD_REG_MASK_DISCONNECT_5_1K_CC2_DB |
USBPD_REG_MASK_DISCONNECT_5_1K_CC1_DB);
}
#ifndef CONFIG_USB
/*
* We need to enable USB's clock so we can config USB control register.
* This is important for a software reset as the hardware clock may
* already be disabled from the previous run.
* We will disable clock to USB module in clock_module_disable() later.
*/
clock_enable_peripheral(CGC_OFFSET_USB, 0, 0);
/*
* Disable default pull-down of USB controller (GPH5 and GPH6) if we
* don't use this module.
*/
IT83XX_USB_P0MCR &= ~USB_DP_DM_PULL_DOWN_EN;
#endif
#if defined(CHIP_FAMILY_IT8XXX1) || defined(CHIP_FAMILY_IT8XXX2)
/* Q group pins are default GPI mode, clear alternate setting. */
IT83XX_VBATPC_XLPIER = 0x0;
/*
* R group pins are default alternate output low, we clear alternate
* setting (sink power switch from VBAT to VSTBY) to become GPO output
* low.
* NOTE: GPR0~5 pins are output low by default. It should consider
* that if output low signal effect external circuit or not,
* until we reconfig these pins in gpio.inc.
*/
IT83XX_VBATPC_BGPOPSCR = 0x0;
#endif
/*
* On IT81202 (128-pins package), the pins of GPIO group K and L aren't
* bonding with pad. So we configure these pins as internal pull-down
* at default to prevent leakage current due to floating.
*/
if (IS_ENABLED(IT83XX_GPIO_GROUP_K_L_DEFAULT_PULL_DOWN)) {
for (i = 0; i < 8; i++) {
IT83XX_GPIO_CTRL(GPIO_K, i) = (GPCR_PORT_PIN_MODE_INPUT
| GPCR_PORT_PIN_MODE_PULLDOWN);
IT83XX_GPIO_CTRL(GPIO_L, i) = (GPCR_PORT_PIN_MODE_INPUT
| GPCR_PORT_PIN_MODE_PULLDOWN);
}
}
/*
* On IT81202/IT81302, the GPIOH7 isn't bonding with pad and is left
* floating internally. We need to enable internal pull-down for the pin
* to prevent leakage current, but IT81202/IT81302 doesn't have the
* capability to pull it down. We can only set it as output low,
* so we enable output low for it at initialization to prevent leakage.
*/
if (IS_ENABLED(IT83XX_GPIO_H7_DEFAULT_OUTPUT_LOW)) {
IT83XX_GPIO_CTRL(GPIO_H, 7) = GPCR_PORT_PIN_MODE_OUTPUT;
IT83XX_GPIO_DATA(GPIO_H) &= ~BIT(7);
}
for (i = 0; i < GPIO_COUNT; i++, g++) {
flags = g->flags;
if (flags & GPIO_DEFAULT)
continue;
/*
* If this is a warm reboot, don't set the output levels or
* we'll shut off the AP.
*/
if (is_warm)
flags &= ~(GPIO_LOW | GPIO_HIGH);
/* Set up GPIO based on flags */
gpio_set_flags_by_mask(g->port, g->mask, flags);
}
}
/**
* Handle a GPIO interrupt by calling the pins corresponding handler if
* one exists.
*
* @param port GPIO port (GPIO_*)
* @param mask GPIO mask
*/
static void gpio_interrupt(int port, uint8_t mask)
{
int i = 0;
const struct gpio_info *g = gpio_list;
for (i = 0; i < GPIO_IH_COUNT; i++, g++) {
if (port == g->port && (mask & g->mask)) {
gpio_irq_handlers[i](i);
return;
}
}
}
/**
* Define one IRQ function to handle all GPIO interrupts. The IRQ determines
* the interrupt number which was triggered, calls the master handler above,
* and clears status registers.
*/
static void __gpio_irq(void)
{
/* Determine interrupt number. */
int irq = intc_get_ec_int();
#ifdef HAS_TASK_KEYSCAN
if (irq == IT83XX_IRQ_WKINTC) {
keyboard_raw_interrupt();
return;
}
#endif
#ifdef CONFIG_HOSTCMD_X86
if (irq == IT83XX_IRQ_WKINTAD)
return;
#endif
/*
* Clear the WUC status register. Note the external pin first goes
* to the WUC module and is always edge triggered.
*/
*(wuesr(gpio_irqs[irq].wuc_group)) = gpio_irqs[irq].wuc_mask;
/*
* Clear the interrupt controller status register. Note the interrupt
* controller is level triggered from the WUC status.
*/
task_clear_pending_irq(irq);
/* Run the GPIO master handler above with corresponding port/mask. */
gpio_interrupt(gpio_irqs[irq].gpio_port, gpio_irqs[irq].gpio_mask);
}
/* Route all WKO interrupts coming from INT#2 into __gpio_irq. */
DECLARE_IRQ(CPU_INT_2_ALL_GPIOS, __gpio_irq, 1);