chip/mchp/keyboard_raw.c

/* Copyright 2017 The Chromium OS Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 *
 * Raw keyboard I/O layer for MCHP MEC
 */

#include "gpio.h"
#include "keyboard_config.h"
#include "keyboard_raw.h"
#include "keyboard_scan.h"
#include "registers.h"
#include "task.h"
#include "util.h"
#include "tfdp_chip.h"

/*
 * Using direct mode interrupt, do not enable
 * GIRQ bit in aggregator block enable register.
 */
void keyboard_raw_init(void)
{
	/* clear key scan PCR sleep enable */
	MCHP_PCR_SLP_DIS_DEV(MCHP_PCR_KEYSCAN);

	keyboard_raw_enable_interrupt(0);
	gpio_config_module(MODULE_KEYBOARD_SCAN, 1);

	/* Enable keyboard scan interrupt */
	MCHP_INT_ENABLE(MCHP_KS_GIRQ) = MCHP_KS_GIRQ_BIT;
	MCHP_KS_KSI_INT_EN = 0xff;
}

void keyboard_raw_task_start(void)
{
	task_enable_irq(MCHP_IRQ_KSC_INT);
}

test_mockable void keyboard_raw_drive_column(int out)
{
	if (out == KEYBOARD_COLUMN_ALL) {
		MCHP_KS_KSO_SEL = BIT(5); /* KSEN=0, KSALL=1 */
#ifdef CONFIG_KEYBOARD_COL2_INVERTED
		gpio_set_level(GPIO_KBD_KSO2, 1);
#endif
	} else if (out == KEYBOARD_COLUMN_NONE) {
		MCHP_KS_KSO_SEL = BIT(6); /* KSEN=1 */
#ifdef CONFIG_KEYBOARD_COL2_INVERTED
		gpio_set_level(GPIO_KBD_KSO2, 0);
#endif
	} else {
#ifdef CONFIG_KEYBOARD_COL2_INVERTED
		if (out == 2) {
			MCHP_KS_KSO_SEL = BIT(6); /* KSEN=1 */
			gpio_set_level(GPIO_KBD_KSO2, 1);
		} else {
			MCHP_KS_KSO_SEL = out + CONFIG_KEYBOARD_KSO_BASE;
			gpio_set_level(GPIO_KBD_KSO2, 0);
		}
#else
		MCHP_KS_KSO_SEL = out + CONFIG_KEYBOARD_KSO_BASE;
#endif
	}
}

test_mockable int keyboard_raw_read_rows(void)
{
	uint8_t b1, b2;

	b1 = MCHP_KS_KSI_INPUT;
	b2 = (b1 & 0xff) ^ 0xff;

	/* Invert it so 0=not pressed, 1=pressed */
	/* return (MCHP_KS_KSI_INPUT & 0xff) ^ 0xff; */
	return b2;
}

void keyboard_raw_enable_interrupt(int enable)
{
	if (enable) {
		MCHP_INT_SOURCE(MCHP_KS_GIRQ) = MCHP_KS_GIRQ_BIT;
		task_clear_pending_irq(MCHP_IRQ_KSC_INT);
		task_enable_irq(MCHP_IRQ_KSC_INT);
	} else {
		task_disable_irq(MCHP_IRQ_KSC_INT);
	}
}

void keyboard_raw_interrupt(void)
{
	/* Clear interrupt status bits */
	MCHP_KS_KSI_STATUS = 0xff;

	MCHP_INT_SOURCE(MCHP_KS_GIRQ) = MCHP_KS_GIRQ_BIT;

	/* Wake keyboard scan task to handle interrupt */
	task_wake(TASK_ID_KEYSCAN);
}
DECLARE_IRQ(MCHP_IRQ_KSC_INT, keyboard_raw_interrupt, 1);

int keyboard_raw_is_input_low(int port, int id)
{
	return (MCHP_GPIO_CTL(port, id) & BIT(24)) == 0;
}