| /* Copyright 2017 The Chromium OS Authors. All rights reserved. |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| /* Eve board configuration */ |
| |
| #ifndef __CROS_EC_BOARD_H |
| #define __CROS_EC_BOARD_H |
| |
| /* |
| * By default, enable all console messages except ACPI and host event because |
| * the sensor stack is generating a lot of activity. |
| */ |
| #define CC_DEFAULT (CC_ALL & ~(CC_MASK(CC_EVENTS) | CC_MASK(CC_LPC))) |
| |
| /* EC */ |
| #define CONFIG_ADC |
| #define CONFIG_BACKLIGHT_LID |
| #define CONFIG_BACKLIGHT_LID_ACTIVE_LOW |
| #define CONFIG_BOARD_VERSION_CBI |
| #define CONFIG_BOARD_FORCE_RESET_PIN |
| #define CONFIG_CRC8 |
| #define CONFIG_CBI_EEPROM |
| #define CONFIG_CASE_CLOSED_DEBUG_EXTERNAL |
| #define CONFIG_DPTF |
| #define CONFIG_FLASH_SIZE_BYTES 0x80000 |
| #define CONFIG_FPU |
| #define CONFIG_I2C |
| #define CONFIG_I2C_CONTROLLER |
| |
| #define CONFIG_KEYBOARD_COL2_INVERTED |
| #define CONFIG_KEYBOARD_PROTOCOL_8042 |
| #define CONFIG_KEYBOARD_KEYPAD |
| #define CONFIG_LED_COMMON |
| #define CONFIG_LID_SWITCH |
| #define CONFIG_LOW_POWER_IDLE |
| #define CONFIG_LTO |
| #define CONFIG_CHIP_PANIC_BACKUP |
| #define CONFIG_PWM |
| #define CONFIG_SOFTWARE_PANIC |
| #define CONFIG_SPI_FLASH_REGS |
| #define CONFIG_SPI_FLASH_W25X40 |
| #define CONFIG_VBOOT_HASH |
| #define CONFIG_SHA256_UNROLLED |
| #define CONFIG_VOLUME_BUTTONS |
| #define CONFIG_VSTORE |
| #define CONFIG_VSTORE_SLOT_COUNT 1 |
| #define CONFIG_WATCHDOG_HELP |
| #define CONFIG_WIRELESS |
| #define CONFIG_WIRELESS_SUSPEND \ |
| (EC_WIRELESS_SWITCH_WLAN | EC_WIRELESS_SWITCH_WLAN_POWER) |
| #define WIRELESS_GPIO_WLAN_POWER GPIO_PP3300_DX_WLAN |
| #undef CONFIG_SUPPORT_CHIP_HIBERNATION |
| #define CONFIG_FANS 1 |
| #undef CONFIG_FAN_INIT_SPEED |
| #define CONFIG_FAN_INIT_SPEED 50 |
| #define CONFIG_FAN_DYNAMIC |
| #define CONFIG_THROTTLE_AP |
| #define CONFIG_PWM_KBLIGHT |
| |
| /* EC console commands */ |
| #define CONFIG_CMD_ACCELS |
| #define CONFIG_CMD_ACCEL_INFO |
| #define CONFIG_CMD_BUTTON |
| |
| /* Port80 */ |
| #undef CONFIG_PORT80_HISTORY_LEN |
| #define CONFIG_PORT80_HISTORY_LEN 256 |
| |
| /* SOC */ |
| #define CONFIG_CHIPSET_SKYLAKE |
| #define CONFIG_CHIPSET_HAS_PLATFORM_PMIC_RESET |
| #define CONFIG_CHIPSET_HAS_PRE_INIT_CALLBACK |
| #define CONFIG_CHIPSET_RESET_HOOK |
| #define CONFIG_HOSTCMD_ESPI |
| #define CONFIG_HOSTCMD_ESPI_VW_SLP_S3 |
| #define CONFIG_HOSTCMD_ESPI_VW_SLP_S4 |
| #define CONFIG_HOSTCMD_FLASH_SPI_INFO |
| #define GPIO_PG_EC_RSMRST_ODL GPIO_RSMRST_L_PGOOD |
| |
| /* Battery */ |
| #define CONFIG_BATTERY_CUT_OFF |
| #define CONFIG_BATTERY_HW_PRESENT_CUSTOM |
| #define CONFIG_BATTERY_DEVICE_CHEMISTRY "LION" |
| #define CONFIG_BATTERY_PRESENT_CUSTOM |
| #define CONFIG_BATTERY_SMART |
| #define CONFIG_PWR_STATE_DISCHARGE_FULL |
| #define CONFIG_BATTERY_REQUESTS_NIL_WHEN_DEAD |
| #undef CONFIG_BATT_HOST_FULL_FACTOR |
| #define CONFIG_BATT_HOST_FULL_FACTOR 100 |
| |
| /* Charger */ |
| #define CONFIG_CHARGE_MANAGER |
| #define CONFIG_CHARGE_RAMP_HW /* This, or just RAMP? */ |
| #define CONFIG_CHARGE_MANAGER_EXTERNAL_POWER_LIMIT |
| #define CONFIG_CHARGER |
| #define CONFIG_CHARGER_ISL9238 |
| #define CONFIG_CHARGER_DISCHARGE_ON_AC |
| #define CONFIG_CHARGER_INPUT_CURRENT 512 |
| #define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON 27000 |
| #define CONFIG_CHARGER_MIN_POWER_MW_FOR_POWER_ON_WITH_BATT 15000 |
| /* AP's thresholds. */ |
| #define CONFIG_CHARGER_LIMIT_POWER_THRESH_BAT_PCT 3 |
| #define CONFIG_CHARGER_LIMIT_POWER_THRESH_CHG_MW 27000 |
| #define CONFIG_CHARGER_PROFILE_OVERRIDE |
| #define CONFIG_CHARGER_PSYS |
| #define CONFIG_CHARGER_SENSE_RESISTOR 10 |
| #define CONFIG_CHARGER_SENSE_RESISTOR_AC 20 |
| #define CONFIG_CMD_CHARGER_ADC_AMON_BMON |
| #define CONFIG_HOSTCMD_PD_CONTROL |
| #define CONFIG_EXTPOWER_GPIO |
| #undef CONFIG_EXTPOWER_DEBOUNCE_MS |
| #define CONFIG_EXTPOWER_DEBOUNCE_MS 1000 |
| #define CONFIG_POWER_BUTTON |
| #define CONFIG_POWER_BUTTON_X86 |
| #undef CONFIG_POWER_BUTTON_INIT_TIMEOUT |
| #define CONFIG_POWER_BUTTON_INIT_TIMEOUT 6 |
| #define CONFIG_POWER_COMMON |
| #define CONFIG_POWER_SIGNAL_INTERRUPT_STORM_DETECT_THRESHOLD 30 |
| #define CONFIG_POWER_S0IX |
| #define CONFIG_POWER_TRACK_HOST_SLEEP_STATE |
| |
| /* Sensor */ |
| #define CONFIG_TEMP_SENSOR |
| #define CONFIG_TEMP_SENSOR_F75303 |
| |
| #define CONFIG_MKBP_EVENT |
| #define CONFIG_MKBP_USE_HOST_EVENT |
| #define CONFIG_ACCELGYRO_BMI160 |
| #define CONFIG_ACCELGYRO_BMI160_INT_EVENT \ |
| TASK_EVENT_MOTION_SENSOR_INTERRUPT(BASE_ACCEL) |
| #define CONFIG_ACCELGYRO_BMI160_INT2_OUTPUT |
| #define CONFIG_ACCEL_BMA255 |
| #define CONFIG_ACCEL_KX022 |
| #define CONFIG_ACCEL_INTERRUPTS |
| #define CONFIG_LID_ANGLE |
| #define CONFIG_LID_ANGLE_SENSOR_BASE BASE_ACCEL |
| #define CONFIG_LID_ANGLE_SENSOR_LID LID_ACCEL |
| #define CONFIG_LID_ANGLE_UPDATE |
| #define CONFIG_DYNAMIC_MOTION_SENSOR_COUNT |
| |
| /* KB backlight driver */ |
| #define CONFIG_LED_DRIVER_LM3509 |
| |
| /* Enable sensor fifo, must also define the _SIZE and _THRES */ |
| #define CONFIG_ACCEL_FIFO |
| /* FIFO size is in power of 2. */ |
| #define CONFIG_ACCEL_FIFO_SIZE 512 |
| /* Depends on how fast the AP boots and typical ODRs */ |
| #define CONFIG_ACCEL_FIFO_THRES (CONFIG_ACCEL_FIFO_SIZE / 3) |
| |
| #define CONFIG_TABLET_MODE |
| #define CONFIG_TABLET_MODE_SWITCH |
| #define CONFIG_GMR_TABLET_MODE |
| #define GMR_TABLET_MODE_GPIO_L GPIO_TABLET_MODE_L |
| |
| /* USB */ |
| #define CONFIG_USB_CHARGER |
| #define CONFIG_USB_PD_ALT_MODE |
| #define CONFIG_USB_PD_ALT_MODE_DFP |
| #define CONFIG_USB_PD_COMM_LOCKED |
| #define CONFIG_USB_PD_DISCHARGE_TCPC |
| #define CONFIG_USB_PD_DUAL_ROLE |
| #define CONFIG_USB_PD_DUAL_ROLE_AUTO_TOGGLE |
| #define CONFIG_USB_PD_LOGGING |
| #define CONFIG_USB_PD_MAX_SINGLE_SOURCE_CURRENT TYPEC_RP_3A0 |
| #define CONFIG_USB_PD_PORT_MAX_COUNT 2 |
| #define CONFIG_USB_PD_MAX_TOTAL_SOURCE_CURRENT 4500 |
| #define CONFIG_USB_PD_VBUS_DETECT_GPIO |
| #define CONFIG_USB_PD_TCPC_LOW_POWER |
| #define CONFIG_USB_PD_TCPM_MUX |
| #define CONFIG_USB_PD_TCPM_TCPCI |
| #define CONFIG_USB_PD_TCPM_ANX7447 |
| #define CONFIG_USB_PD_TCPM_ANX7447_OCM_ERASE_COMMAND |
| #define CONFIG_USB_PD_TCPM_PS8751 |
| #define CONFIG_USB_PD_TRY_SRC |
| #define CONFIG_USB_POWER_DELIVERY |
| #define CONFIG_USB_PD_TCPMV1 |
| #define CONFIG_USBC_SS_MUX |
| #define CONFIG_USBC_VCONN |
| #define CONFIG_USBC_VCONN_SWAP |
| #define CONFIG_USB_MUX_RUNTIME_CONFIG |
| |
| |
| /* BC 1.2 charger */ |
| #define CONFIG_BC12_DETECT_PI3USB9281 |
| #define CONFIG_BC12_DETECT_PI3USB9281_CHIP_COUNT 2 |
| |
| /* Optional feature to configure npcx chip */ |
| #define NPCX_UART_MODULE2 1 /* 1:GPIO64/65 as UART */ |
| #define NPCX_JTAG_MODULE2 0 /* 0:GPIO21/17/16/20 as JTAG */ |
| #define NPCX_TACH_SEL2 1 /* 0:GPIO40/73 1:GPIO93/A6 as TACH */ |
| |
| /* I2C ports */ |
| #define I2C_PORT_TCPC0 NPCX_I2C_PORT0_0 |
| #define I2C_PORT_TCPC1 NPCX_I2C_PORT0_1 |
| #define I2C_PORT_USB_CHARGER_0 NPCX_I2C_PORT0_0 |
| #define I2C_PORT_USB_CHARGER_1 NPCX_I2C_PORT0_1 |
| #define I2C_PORT_EEPROM NPCX_I2C_PORT0_0 |
| #define I2C_PORT_BATTERY NPCX_I2C_PORT1 |
| #define I2C_PORT_CHARGER NPCX_I2C_PORT1 |
| #define I2C_PORT_PMIC NPCX_I2C_PORT2 |
| #define I2C_PORT_KBLIGHT NPCX_I2C_PORT2 |
| #define I2C_PORT_GYRO NPCX_I2C_PORT3 |
| #define I2C_PORT_ACCEL NPCX_I2C_PORT3 |
| #define I2C_PORT_THERMAL NPCX_I2C_PORT3 |
| #define I2C_PORT_ALS NPCX_I2C_PORT3 |
| |
| /* I2C addresses */ |
| #define I2C_ADDR_MP2949_FLAGS 0x20 |
| #define I2C_ADDR_EEPROM_FLAGS 0x50 |
| |
| #ifndef __ASSEMBLER__ |
| |
| /* support factory keyboard test */ |
| #define CONFIG_KEYBOARD_FACTORY_TEST |
| |
| #include "gpio_signal.h" |
| #include "registers.h" |
| |
| enum temp_sensor_id { |
| TEMP_SENSOR_LOCAL = 0, |
| TEMP_SENSOR_REMOTE1, |
| TEMP_SENSOR_REMOTE2, |
| TEMP_SENSOR_COUNT, |
| }; |
| |
| /* |
| * Motion sensors: |
| * When reading through IO memory is set up for sensors (LPC is used), |
| * the first 2 entries must be accelerometers, then gyroscope. |
| * For BMI160, accel, gyro and compass sensors must be next to each other. |
| */ |
| |
| enum sensor_id { |
| LID_ACCEL = 0, |
| BASE_ACCEL, |
| BASE_GYRO, |
| LID_ALS, |
| SENSOR_COUNT, |
| }; |
| |
| enum adc_channel { |
| ADC_BASE_DET, |
| ADC_VBUS, |
| ADC_AMON_BMON, |
| ADC_CH_COUNT, |
| }; |
| |
| enum pwm_channel { |
| PWM_CH_LED1, |
| PWM_CH_LED2, |
| PWM_CH_FAN, |
| PWM_CH_KBLIGHT, |
| /* Number of PWM channels */ |
| PWM_CH_COUNT, |
| }; |
| |
| enum fan_channel { |
| FAN_CH_0 = 0, |
| /* Number of FAN channels */ |
| FAN_CH_COUNT, |
| }; |
| |
| enum mft_channel { |
| MFT_CH_0 = 0, |
| /* Number of MFT channels */ |
| MFT_CH_COUNT, |
| }; |
| |
| enum oem_id { |
| PROJECT_AKALI = 1, |
| PROJECT_VAYNE = 3, |
| PROJECT_SONA, |
| PROJECT_PANTHEON, |
| PROJECT_NAMI, |
| PROJECT_COUNT, |
| }; |
| |
| enum model_id { |
| /* Sona variants */ |
| MODEL_SYNDRA = 1, |
| /* Akali variants */ |
| MODEL_EKKO = 1, |
| MODEL_BARD = 2, |
| }; |
| |
| #define SKU_ID_MASK_KBLIGHT BIT(0) |
| #define SKU_ID_MASK_CONVERTIBLE BIT(9) |
| #define SKU_ID_MASK_KEYPAD BIT(15) |
| #define SKU_ID_MASK_UK2 BIT(18) |
| |
| /* TODO(crosbug.com/p/61098): Verify the numbers below. */ |
| /* |
| * delay to turn on the power supply max is ~16ms. |
| * delay to turn off the power supply max is about ~180ms. |
| */ |
| #define PD_POWER_SUPPLY_TURN_ON_DELAY 30000 /* us */ |
| #define PD_POWER_SUPPLY_TURN_OFF_DELAY 250000 /* us */ |
| |
| /* delay to turn on/off vconn */ |
| |
| /* Define typical operating power and max power */ |
| #define PD_OPERATING_POWER_MW 15000 |
| #define PD_MAX_POWER_MW 70000 |
| #define PD_MAX_CURRENT_MA 3500 |
| #define PD_MAX_VOLTAGE_MV 20000 |
| |
| /* Board specific handlers */ |
| void board_reset_pd_mcu(void); |
| void board_set_tcpc_power_mode(int port, int mode); |
| |
| /* Sensors without hardware FIFO are in forced mode */ |
| #define CONFIG_ACCEL_FORCE_MODE_MASK (BIT(LID_ACCEL) | BIT(LID_ALS)) |
| |
| /* These should be referenced only after HOOK_INIT:HOOK_PRIO_INIT_I2C+1. */ |
| extern uint16_t board_version; |
| extern uint8_t oem; |
| extern uint32_t sku; |
| extern uint8_t model; |
| |
| /* SKU_ID[24:31] are dedicated to OEM customization */ |
| #define CBI_SKU_CUSTOM_FIELD(val) ((val) >> 24) |
| |
| void ccd_mode_isr(enum gpio_signal signal); |
| |
| #endif /* !__ASSEMBLER__ */ |
| |
| #endif /* __CROS_EC_BOARD_H */ |